How To Make Macro Run In All Worksheets
May 21, 2014How do I make my macro tun in a loop through all sheets?
View 10 RepliesHow do I make my macro tun in a loop through all sheets?
View 10 RepliesEvery month I get a big 5,000 row worksheet from a mainframe download. I need to move data from the one worksheet into multiple little worksheets (about 25 of them) according to a field called "OrgUnitName".
Essentially what I want can be shown in outline form:
I. Stats (workbook)
A. 2009 (worksheet)
1. Jan (worksheet that appears only when 2009 worksheet is clicked)
2. Feb (worksheet that appears only when 2009 worksheet is clicked)
B. 2010 (worksheet)
1. Jan (worksheet that appears only when 2010 worksheet is clicked)
2. Feb (worksheet that appears only when 2010 worksheet is clicked)
I was hoping there was a way to have one workbook that displays only the years (2009, 2010) as worksheet tabs but once clicked, would reveal 12 nested worksheets (one for each month). Once a different year worksheet was clicked, the month worksheets currently displayed would hide again.
I'm working on a workbook with several names for every month and I'd like to populate the names from the different worksheets to have a list in another worksheet to make a summary avoiding duplicates and making sure every name is captured.
I have attached a sample sheet....populate_2013.xlsx
I want to make a lookup on a string of words from one of my worksheets and I also whant to make a hyper link so that when I click on the lookup command I should pop to the other worksheet were my database is.
View 2 Replies View RelatedI am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I would like to make a macro that loops another macro and changes a value in a cell, like such:
Run macro
if cell A1 = cell A2
Stop
Else set value in cell A1 -0.1
Loop
How exactly would i do that?
I have a little bit:
Sub Macro2()
Call wantedmacro
With Range("A1")
If .Cells(1, 1).Value = "A2" Then Exit Sub
Else Range("A11").Value = (A1-0.1)
Call Macro2
End Sub
is it possible to put a message box in a VBA code so that the macro only runs once, else the worbook needs to reopened again for it to work. Is this the best way from preventing the macro to run again?
If i have multiple users, there is always a chance one might accidently press the command button twice.
I am trying to figure out how to make a macro run just once a day -- the first time i open a workbook and then no matter how many times I open that workbook again it does not run......... I know how to get to run automatically when i open the book - just not how to keep it from running again THAT DAY.
Then the next day when i open that book again I want it to run again -- once......and so on..................
I've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies View RelatedI am looking for is a macro that will search in column B for some codes,example: 0403874700197 but count only the numbers between the 5th (aka 8 ) and prelast (aka 12th number,in this case 9,),so we have the code 87470019. Then every code on column B has it's D column wich has some numbers.
So what will the macro do?Take column B,start with line no 1,take the code and search for similiar,counting only from 5th to 12th letter, in all the workbook ,after find all the similiar codes it will see their D columns,sum them to column D at the line wich it find the first code.Then take line No 2,see if the D cell is empty,pass,if not search for similiar codes in column B...and goes on.It's important to delete the numbers to D cells that already has summed!
I have 2 worksheets - "Results" and "Historical". I am trying to record a macro that copies data from "Results" and then pastes into Historical. The data I want to copy will always be in "Results" A1:A10. When I want to update the macro (which will be weekly), I want it to copy A1:A10 and then paste into "Historical". Simple enough. Here is the problem:
Since this will be updated weekly, the first time I update I will want "Results" data copied into "Historical" A1:A10. The next time I update, I want the data copied into "Historical" B1:B10; then C1:C10, etc. Essentially I want the keep a running total of all of my prior data.
So I need the macro to be able to say something like - paste date into the first available column. If there is data in A1:A10, then paste into B, then C, D. How do I make the Macro variable?
I have a macro called MyMacro which I would like to run every minute starting from 08:00:00 and finish at 14:00:00.
View 9 Replies View RelatedI am trying to make a chart and I just used the macro recording thing to get the code. I have a variable called days.
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R24C2"
Instead of going to row 24 I want to go to row days+1 so I did the following:
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R"&days+1&"C2"
how I can fix it? It highlights the "C2" at the end and says Expected End of Statement.
I would like to make a macro to format all my cells.
I need it to format my last digit to superscrift IF there is 4 digit after decimal point.
How to do this?
Is there a way to make a macro remember my keystrokes? When I record a macro
it only remembers the cell number of the box that I clicked and not how I got
there. What I would like to do is use ctrl+F to find what I'm looking for and
then use the keyboard (2 keystrokes down and 6 keystrokes to the right for
example) to arrive at a cell. However when I arrive at a cell, the macro
just uses the cell number lets say H20 and doesn't remember how I got there
from using the keyboard. What I'm trying to do is create a macro which
graphs data from several different worksheets. The problem is the data from
the different worksheets isn't the size of the data from which the macro was
created. When I run the macro on different worksheets it doesn't graph the
data from the same starting points or ending points. If I can't use a use a
macro to do this,
I am trying make a macro required a password to run.
I found this code below but not sure how to use it. I would like to be able to run it from a command button.
Sub MPW()
Dim My Password
My Password = InputBox("Please enter password", "Password Prompt", "********")
'Hardcode password
If MyPassword = "password" Then
MsgBox "Access Granted", vbInformation, "Access"
'call macro
Exit Sub
Else
[code]...
i want to make the pivot table using vba macro. the sample workbook looks likes this [URL]...
View 1 Replies View RelatedI tried recording a macro to automate some tasks I perform every day between two workbooks. While in one I want to go get data from the other. The problem I'm having is the name of the workbooks I want to run this on changes every time I download my data into Excel. The files always start with the same name but the date gets appended to it. Is there a way to modify the macro to just work with the two books I've got open?
View 3 Replies View RelatedI run a MTD sales report from Access. If the "SOP Type" in Column Q, is a "4", I have to manually change the Qty and Price to negative values as that "4" denotes a Credit. My question is this...
Can I write a Macro that would be able to read the value in Column Q and, where necessary, make the values negative in the appropriate columns?
I have a fairly simple macro (below). I want it to do one more thing.....not run if the filters have not been changed. I would like to prevent the error that occurs if someone tries to run it and there are no filters active.
Private Sub AutoFilter_Remove()
Sheets("Data").Select
ActiveSheet.Unprotect "password"
ActiveSheet.ShowAllData
[Code].....
I'm trying to run an application using a VB macro. The command line provided to me is "C:Program FilesWeb Scraper Plus+PkgExec.exe" -p "5A147DC7-0420-4321-9DEC-02B8D8111A78". This command line works fine from my Run menu. Now how do I write a Shell function to make this run from a VB macro?
View 4 Replies View RelatedI'm having some difficulty with this one. I have found several posts on how to make a macro work through several rows, but cannot seem to figure out how to apply it to my macro.
Right now I'm having to write the macro for every line and it's a bear! Here's what I'm working with right now and it's ridiculous (I've actually got through line 51, but I'll only post a few here, for your sanity!)- there has to be a better way:
If Range("C9") = "" Then
Range("T9").Formula = "=IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))"
Range("U9").Formula = "=IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))"
Else
Range("T9").Formula = "=IF((T8+U8)>=180,0,(IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))))"
Range("U9").Formula = "=IF((T8+U8)>=180,0,(IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))))"
End If............................
Some of the sheets in my spreadsheet contain some data and graphs with a few macros that are run when a button is pressed. At the bottom I have some comments with a macro that is run to timestamp when these comments are updated or edited.
What I would like to do is lock the entire sheet so that the data and graphs can't be tampered with, apart from the comments part at the bottom because I'd like to be able to have the comments editable. So far I have managed to do that, but when I edit a comment and the timestamp code is run it creates a run-time error 1004. I could just remove the timestamp code I guess but I'd like to keep it there... figuring that there must be a solution.
How can I work around this problem ? Either by being able to keep the sheet locked and still have the timestamp code run, or have it temporarily unlock the sheet - run the code - and then re-lock the sheet.
I have read quite a few tutorials but none of them really reference what I am trying to achieve. Essentially I have one column with 2 options: "Compliance" and "Improvement". I am trying to make a dynamic chart based on the number of occurrences. From my understanding you need to use a "Named Range" and "Count" but I can not find any information on how you combine the two to make a chart.
View 3 Replies View RelatedI've got a problem with copying cells from table A to B.
A short insight of the situation:
Table A shows: ITEM_1 = 3, consequently ITEM_1 from table A is copied to table B for 3 times.
I've got a few huge information blocks to handle (up to 5000 items) obviously it's unreasonable to do this manually.
I've added an xlsx file with more detailed description.
Example_WHS.xlsx
I have a work book with 4 sheets in it. Now i want to make a summery sheet for this.
View 2 Replies View RelatedI have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
View 11 Replies View RelatedOR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
I want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
View 2 Replies View Related