I have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
View 11 RepliesI've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies View RelatedI have a fairly simple macro (below). I want it to do one more thing.....not run if the filters have not been changed. I would like to prevent the error that occurs if someone tries to run it and there are no filters active.
Private Sub AutoFilter_Remove()
Sheets("Data").Select
ActiveSheet.Unprotect "password"
ActiveSheet.ShowAllData
[Code].....
I'm having some difficulty with this one. I have found several posts on how to make a macro work through several rows, but cannot seem to figure out how to apply it to my macro.
Right now I'm having to write the macro for every line and it's a bear! Here's what I'm working with right now and it's ridiculous (I've actually got through line 51, but I'll only post a few here, for your sanity!)- there has to be a better way:
If Range("C9") = "" Then
Range("T9").Formula = "=IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))"
Range("U9").Formula = "=IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))"
Else
Range("T9").Formula = "=IF((T8+U8)>=180,0,(IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))))"
Range("U9").Formula = "=IF((T8+U8)>=180,0,(IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))))"
End If............................
OR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
Our system can create an SLK file showing customer open orders. It is ALWAYS in the exact same format. I created a macro to open this file, manipulate the data (convert text to numbers, convert text date to actual date, and a few other things) and then make a pivot table.
When I try to run it it gets hung up on the pivot table and the debug highlights the BOLD below:
Columns("F:L").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"SOLIST!C6:C12").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
The RowField, ColumnField, and Page Fields are correct.
The QTY is the data that goes in the field.
I am using office 2007 and here is the problem I am facing. I am using a formula and it is based on two columns data. The formula result is at C20:C2400, while the two data columns are at A20:A2400 and B20:B2400. I add one more row of data at A2401 and B2401, I expect the formula result would auto extend to C2401 but it doesn't, nothing happen.
I check that I need to turn on the auto extend check box in option, I check and it is already on.
Is there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedIn column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies View RelatedI am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
The following formula gives me the error message #REF!
=INDEX(INDIRECT("R7"),MATCH(V6,D8:D11,1),11)
The problem I believe is in the INDIRECT("R7") as the following formula works
=INDEX(Well_AA_09,MATCH(V6,D8:D11),1),11)
The content of cell R7 is the text Well_AA_09 which is the name of a dynamic range I have created and pasted from within VBA into cell R7.
a macro script that will make cell in a certain range to zero?
In my worksheet, I have the user input numbers between B2 and B15, C2 and C15,... down to F2 and F15. I want it so that if the user clicks a "button," the macro resets all the cells in the above mentioned range to zero.
I've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:
=IF('Final'!A5='Original'!A5, "-",'Final'!A5)
The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.
Is it possible for the IF function to search the formula in a cell, and not the value?
if i enter a value in 1 cell and want it to increase by a percentage how can this be done without having a sum column etc
View 9 Replies View RelatedI'm trying to convert some data from MLS to make it easier to work with statistically. The raw data regarding Bath count downloads from MLS in 2 columns; 1 column for Full Baths & 1 column for Half Baths (see Raw Data.jpg). I want to concatenate the baths to one column and, if there is a 1/2 bath, tack ".5" to the end of the full bath count.
The problem with my formula is that if it concatenates the ".5" to the full bath count number, it converts the format to text (see Current Formula.jpg). I know I can go through later and convert it back to number format but is there a formula I could use that would keep it in number format?
Is it possible to make excel template work only on 1 computer by giving any vba password (on lines of license number).
Aim is to ensure it works on only client computer, even if template is shared outside it becomes useless.(We often see clients audit team getting access to templates using it for thier purpose & distributing).
In same spirit what are best practices one can take like protecting formulas with password etc
So i got a few macros on a worksheet and one of them is simply :
Sub Pr_Removefilter()
ActiveSheet.ShowAllData
End Sub
Ive worked on the excel a couple of times, everything fine. Then it started crashing upon saving (after changes made that had no possible connection to the macro, on another sheet). After a few painfull trials and errors i located the problem to be this macro button. I erased it, created a new one with the EXACT macro and it works. Why?..
I have the following macro to autohide some rows with no data, however its remove rows starting from column A.
[Code] .....
How do i fix this to only hide the rows in the range (H4:V50)?
I have the following macro which runs vlookups between two sheets in excel. Whenever i add columns to the range the vlookup column reference is not the correct cell. Is their any way I can adjust the macro so that the column number adjusts in the formula when a new column is added??
Sub template()
Range("C7").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE)="""", """",VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE))"
'category
Range("c9").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE)= """", """",VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE))"
'sub-category
Range("c10").Select...................
I am using Excel to produce work orders and I need each one to have its own unique number. Much like an invoice or contract number, each time I open the file I would like Excel to generate a new number for that spreadsheet with a value of 1 more than the previous spreadsheet.
View 14 Replies View RelatedI have a large amount of student demographic, course, and class data on an
Excel worksheet for an entire school district. The ethnic code for each
student is a single alpha character. I need to find a way to get a total for
each ethnic code in each course when filtering by each course.
Each column of data has a header and I am using the Auto-filter feature for
filtering. Is there a way that the COUNTIF function can be set up for each
ethnic code so that it will count from the filtered data? If not, is there
any other function, or nested functions, that will work?
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
I have 2 cell, A1 and B1. When any data is entered into A1, B1 will display the time corresponding to when the data was entered.
I was thinking about function for B1 would be "=IF(A1="","",now()) ". It worked such that it will display the time, however the value in B1 will automatically update itself if I were to randomly input any data in any other cell too.
For example, I input "testing" in A1. B1 display "11:20PM". Ten minutes later, I input "hello" in A2. B1 now display "11:30PM".
Anyone know a way to stop B1 from updating? or only update when new data is entered into A1 only?
I want to make a macro that will generate a backup copy each time the Excel file is opened. I premade a backup and recorded the following macro, placing it in the sub here:
Code:
Private Sub Workbook_Open()
ChDir "C:Usersmy.selfDesktop"
ActiveWorkbook.SaveAs Filename:= _
"C:Usersmy.selfDesktopDaily Backup.xlsm", _
FileFormat:=xlOpenXMLWorkbookMacroEnabled,_ CreateBackup:=False
ActiveWorkbook.Close
End Sub
names have been changed to protect the innocent. But now either putting in to repoen the original working excel or manually opening it puts me in an infinite loop of backing up. The probelm seems to be that to make a copy it is making the open workbook the backup. So two part question here:
1. Can I make a copy under the same name automatically when the file is opened while staying in the current one?
Example: open the Excel file "Working Copy", which makes a mirror file called "Backup Copy", but stay in "Working Copy".
2. From what I did manage to do, I notice every time it asks if I want to overwrite. I chose "Yes" when recording the macro but this doesn't seem to get captured. can I make it automatically yes without being asked?
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Above is the formula I am working with. I am inserting it into row 4 thru row 996 in a number of different columns. The auto fill function works great for this part of the formula….
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!
However, this part Z29:Z39 I have to enter manually row by row until I can figure out a better way. Do you know an easier way?
To put this formula…
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Into any column row 4 thru row 996, without having to change Z29:Z39 for every row, since I cannot rely on autofill?
I have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VBA code
View 4 Replies View RelatedI have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VGA code is this possible ???
View 1 Replies View RelatedI want to make my VBA cell reference update when I update my spreadsheet by adding or deleting columns or rows. Is there a way to do this?
View 9 Replies View RelatedI have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
I'm in the process of continuing to build this babe (very slowly, as I have limited programming knowledge), and I wondered if there was a way to modify this code to make it refresh the data page if a server's page fails to load.
Part of my code is something like this, the first part being just the pseudo log on script.
Especially when there are over 50 pages to grab, the chances of one of the pages failing to load is VERY high, and this macro stops at the "Refreshbackground=False" command.
Is there a way to trigger a "refresh" once it fails?