I am looking for is a macro that will search in column B for some codes,example: 0403874700197 but count only the numbers between the 5th (aka 8 ) and prelast (aka 12th number,in this case 9,),so we have the code 87470019. Then every code on column B has it's D column wich has some numbers.
So what will the macro do?Take column B,start with line no 1,take the code and search for similiar,counting only from 5th to 12th letter, in all the workbook ,after find all the similiar codes it will see their D columns,sum them to column D at the line wich it find the first code.Then take line No 2,see if the D cell is empty,pass,if not search for similiar codes in column B...and goes on.It's important to delete the numbers to D cells that already has summed!
is it possible to put a message box in a VBA code so that the macro only runs once, else the worbook needs to reopened again for it to work. Is this the best way from preventing the macro to run again?
If i have multiple users, there is always a chance one might accidently press the command button twice.
I am trying to figure out how to make a macro run just once a day -- the first time i open a workbook and then no matter how many times I open that workbook again it does not run......... I know how to get to run automatically when i open the book - just not how to keep it from running again THAT DAY.
Then the next day when i open that book again I want it to run again -- once......and so on..................
I've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
I have 2 worksheets - "Results" and "Historical". I am trying to record a macro that copies data from "Results" and then pastes into Historical. The data I want to copy will always be in "Results" A1:A10. When I want to update the macro (which will be weekly), I want it to copy A1:A10 and then paste into "Historical". Simple enough. Here is the problem:
Since this will be updated weekly, the first time I update I will want "Results" data copied into "Historical" A1:A10. The next time I update, I want the data copied into "Historical" B1:B10; then C1:C10, etc. Essentially I want the keep a running total of all of my prior data.
So I need the macro to be able to say something like - paste date into the first available column. If there is data in A1:A10, then paste into B, then C, D. How do I make the Macro variable?
Is there a way to make a macro remember my keystrokes? When I record a macro it only remembers the cell number of the box that I clicked and not how I got there. What I would like to do is use ctrl+F to find what I'm looking for and then use the keyboard (2 keystrokes down and 6 keystrokes to the right for example) to arrive at a cell. However when I arrive at a cell, the macro just uses the cell number lets say H20 and doesn't remember how I got there from using the keyboard. What I'm trying to do is create a macro which graphs data from several different worksheets. The problem is the data from the different worksheets isn't the size of the data from which the macro was created. When I run the macro on different worksheets it doesn't graph the data from the same starting points or ending points. If I can't use a use a macro to do this,
I am trying make a macro required a password to run.
I found this code below but not sure how to use it. I would like to be able to run it from a command button.
Sub MPW() Dim My Password My Password = InputBox("Please enter password", "Password Prompt", "********") 'Hardcode password If MyPassword = "password" Then MsgBox "Access Granted", vbInformation, "Access" 'call macro Exit Sub Else
I tried recording a macro to automate some tasks I perform every day between two workbooks. While in one I want to go get data from the other. The problem I'm having is the name of the workbooks I want to run this on changes every time I download my data into Excel. The files always start with the same name but the date gets appended to it. Is there a way to modify the macro to just work with the two books I've got open?
I run a MTD sales report from Access. If the "SOP Type" in Column Q, is a "4", I have to manually change the Qty and Price to negative values as that "4" denotes a Credit. My question is this...
Can I write a Macro that would be able to read the value in Column Q and, where necessary, make the values negative in the appropriate columns?
I have a fairly simple macro (below). I want it to do one more thing.....not run if the filters have not been changed. I would like to prevent the error that occurs if someone tries to run it and there are no filters active.
I'm trying to run an application using a VB macro. The command line provided to me is "C:Program FilesWeb Scraper Plus+PkgExec.exe" -p "5A147DC7-0420-4321-9DEC-02B8D8111A78". This command line works fine from my Run menu. Now how do I write a Shell function to make this run from a VB macro?
I'm having some difficulty with this one. I have found several posts on how to make a macro work through several rows, but cannot seem to figure out how to apply it to my macro.
Right now I'm having to write the macro for every line and it's a bear! Here's what I'm working with right now and it's ridiculous (I've actually got through line 51, but I'll only post a few here, for your sanity!)- there has to be a better way:
If Range("C9") = "" Then Range("T9").Formula = "=IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))" Range("U9").Formula = "=IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))" Else Range("T9").Formula = "=IF((T8+U8)>=180,0,(IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))))" Range("U9").Formula = "=IF((T8+U8)>=180,0,(IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))))" End If............................
Some of the sheets in my spreadsheet contain some data and graphs with a few macros that are run when a button is pressed. At the bottom I have some comments with a macro that is run to timestamp when these comments are updated or edited.
What I would like to do is lock the entire sheet so that the data and graphs can't be tampered with, apart from the comments part at the bottom because I'd like to be able to have the comments editable. So far I have managed to do that, but when I edit a comment and the timestamp code is run it creates a run-time error 1004. I could just remove the timestamp code I guess but I'd like to keep it there... figuring that there must be a solution.
How can I work around this problem ? Either by being able to keep the sheet locked and still have the timestamp code run, or have it temporarily unlock the sheet - run the code - and then re-lock the sheet.
I have read quite a few tutorials but none of them really reference what I am trying to achieve. Essentially I have one column with 2 options: "Compliance" and "Improvement". I am trying to make a dynamic chart based on the number of occurrences. From my understanding you need to use a "Named Range" and "Count" but I can not find any information on how you combine the two to make a chart.
I have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
OR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
I want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
I'm using a pre-made spreadsheet from my stock broker (Interactive Brokers) that retrieves and displays real-time quotes, and allows one to retrieve historical stock data, among other things. I've created a little macro within it to try and automate some common tasks I do everyday - basically I want to retrieve a year of daily stock quotes for "stock 1" from IB's servers, then have the macro wait for the retrieval to be done and written to the spreadsheet (takes anywhere between 10 and 30 secs). After that's all done, then I want to do the same for "stock 2". Then when that's done, the macro proceeds to go ahead and do some calcs on stock1 and stock2. The problem is after my stock1 data request, the macro just keep on trucking through to the next commands while stock1's data retrival is still going on.
so things are getting all balled up. How can I get my macro to wait until stock1's data retrieval is all done?
For example the Folder name is All file in which 60 files are there and I have a excel sheet named File List so I want to update the file names in excel through macro.
I am using a VBA macro (Using mouse clicks as inputs for neuroscience experiment?).
What the macro does is it inputs a timestamp every time a keyboard combination is used (alt+right arrow in this case).
The part of the macro which inputs the timestamp is like this:
Sub AltRight_Sub() On Error Resume Next Cancel = True Cells(Rows.Count, 2).End(xlUp).Offset(1) = Format(Now, "HH:MM:SS") End Sub
I would like the timestamp to be displayed as HH:MM:SS.00, i.e. show the milliseconds. I tried playing around with the timestamp format (changing it to = Format(Now, "HH:MM:SS.00" or = Format(Now, "HH:MM:SS.0;@")) or = Format(Now, "MM:SS.000") and I tried using = Evaluate("=NOW()") instead of = Format(Now, "HH:MM:SS".
i want a macro that make acircle around number in acell in excel debending on the nuber that the student given that under 14 has take acircle over is none like that
this is another example code i fill acell with gray color ---------- For Each cell In Range("q6:q580") Select Case cell.Value Case Is >= 16 cell.Interior.ColorIndex = 2 Case Is < 16 cell.Interior.ColorIndex = 15 End Select Next cell ------------------
Our system can create an SLK file showing customer open orders. It is ALWAYS in the exact same format. I created a macro to open this file, manipulate the data (convert text to numbers, convert text date to actual date, and a few other things) and then make a pivot table.
When I try to run it it gets hung up on the pivot table and the debug highlights the BOLD below:
