Hyperlink Event
Dec 8, 2009I have a hyperlink within Sheet1 (Functionalities) of my workbook that looks like this: ...
View 13 Replies
ADVERTISEMENT
Change Event When Hyperlink Is Added?
May 2, 2013When changes are made to one sheet, I want it to update a table in another sheet. However, a good portion of the changes will involve adding hyperlinks to my original sheet. However adding hyperlinks doesn't seem to fire the worksheet_change event.
Is there a way to listen for when a hyperlink is added (and to which cell)?
Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet
Mar 27, 2009Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedChange Event Causing Event To Fire Again
Aug 7, 2006I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
Hyperlink In Cell Have Email CODE But Hyperlink Is Not Clickable
Jul 2, 2009I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
Hyperlink - Insert New Rows Without Losing Hyperlink?
Jan 30, 2014I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
View 2 Replies View RelatedHyperlink Address From Hyperlink Formula/Function
Oct 17, 2006I am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
Event Sub From Run Function Event
Aug 5, 2014Looking for the syntax that will allow me to code an event sub routine, based off the event of a specific function e.g. findnum being run.
View 14 Replies View RelatedEvent Name
Dec 14, 2009What would be the name of the event where if I select a particular cell in Sheet1 it triggers something in say Sheet2?
View 9 Replies View RelatedConditions On VBA Event
Oct 24, 2009Working in Excel 2003. I have a VBA code that, if a particular option is chosen from a drop down box, then a message box appears. What I'd like to do is alter this code so that if cell J5 has "Text 1", "Text 2", or "Text 3" then the message box does not appear. Here's my
View 3 Replies View RelatedEvent Procedure
Dec 11, 2007I've created a macro with a custom dialog box, but I don't know how to make the transition from when I make the dialog box pop up, the user enters the information, then they click "Continue" or "Cancel" or whatever it may be, how to do I make it happen from there out?
Do I make the command buttons a boolean and if they click it's true? How do I make it work?
Tab Key Change Event
Apr 19, 2009I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
Event Not Being Recognized?
Dec 12, 2011I have a worksheet used for scheduling. When a members time is updated, it updates the counting cell for that time by subtracting 1 (thats simplified, the forumla is more complex than that).
I have five teams and five workbooks for each team to do it's own scheduling. In just ONE workbook, the Worksheet_Change() event has stopped executing. It's fine in the others. I renamed the workbook to archive it then put another workbook in it's place and now that one works just fine.
The workbook that I've archived, I hate doing that not knowing what would cause the Worksheet_Change() to stop being recognized. There is no code on the sheet or related to the sheet that would stop it or cause events to be cancelled.
I wanted to know if there is some secret keystroke combination that may have been inadvertently clicked that would cause events to firing or stop being recognized?
Event By Hour And Age?
Apr 28, 2014I have a table on excel that I would like to have an event calculated by the hour and would like to know how to, ex:
1900
2000
2100
2300
00-0100
0
1
0
2
0
that above is where I want the formula to calculate the following:
Activiy 1
2015
Activity 2
2310
Activity 3
2348
Also I would like to do something similar like that but for age, ex:
18-24
3
25-40
1
41-59
0
[code].....
Checkbox Event
Dec 10, 2006I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies View RelatedWorksheet_Change Event
Dec 31, 2006I have two workbooks that have the following
Private Sub Worksheet_Change(ByVal Target As Range)
Dim myColor As Integer
With Target
If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub
If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
Select Case Month(.Value)
Case 1: myColor = 3
Case 2: myColor = 17
Case 3: myColor = 19
Case 4: myColor = 22
Case 5: myColor = 26
Case 6: myColor = 33
Case 7: myColor = 36
Case 8: myColor = 38
Case 9: myColor = 40
Case 10: myColor = 42
Case 11: myColor = 44
Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question,
Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
Worksheet_SelectionChange Event
Jan 6, 2008I found this code on one of my many searches, that works great.
(can't remember where I got it or who wrote it, (My deepest apoligies to the author))
Public pRule
Sub butRulerToggle_Click()
pRule = Not pRule
Selection.Select
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If pRule Then
For Each aCell In ActiveSheet.UsedRange
If aCell.Interior.ColorIndex = 27 Then aCell.Interior.ColorIndex = xlNone
Next
On Error Resume Next
For Each aCell In Application.Intersect(ActiveCell.EntireRow.Cells, ActiveSheet.UsedRange)
If aCell.Interior.ColorIndex = xlNone Then aCell.Interior.ColorIndex = 27
Next
End If
End Sub
My question:
This works in a sheet module. How can I put it in the This Workbook module so it works on all sheets.
By the way, what this does is highlight the whole row on a clik of a cell, leaving any color formating that was initially there alone.
Very useful if you are looking at say A10 and then want to look at Z10 without losing focus on the row.
Is There A Worksheet_Open Event?
Mar 28, 2008There is a Workbook_Open event in VBA. Is there a Worksheet_Open event? I.e. I want to write some code that is applied when a worksheet becomes active/is displayed to the user.
E.g. I am in Sheet1. I click a button which links me to Sheet2, however in doing that I want the value of the Active Cell in Sheet1 to be displayed in A1 of Sheet2.
Is this possible? Is there another way to do this.
On Selection Event
Apr 14, 2008I would like to create some VBA code that changes the color of the cells I have selected, as soon as I let go of my mouse click. Additionally, is there a way to identify where the range begins and ends so I can test to make sure the range is inside a certain area?
View 9 Replies View RelatedBefore Save Event
Apr 29, 2008I want to execute as the user saves the workbook. I want to unhide the rows that may have been hidden during use, on the save. I would prefer it to just happen with no interaction with the user. They save the the book and without them even knowing the rows are unhidden and the file saves. The code it self works as I want it to, I added to a command button with no problems as soon as I add it to the before save in the Thisworkbook it will not even work even if I just try to step in.
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual
Worksheets("Prelims").Range("A11:A511").EntireRow.Hidden = False
Worksheets("Elecs").Range("A11:A1261").EntireRow.Hidden = False
Worksheets("Civils").Range("A11:A5011").EntireRow.Hidden = False
Application.EnableEvents = True
Application.ScreenUpdating = True
Application.Calculation = xlCalculationAutomatic
Worksheets("Civils").Select
End Sub
AfterCalculate Event
Jul 10, 2008I have a macro that needs to run whenever a result from a calculation on my worksheet changes. I'm currently using Worksheet_Change to accomplish this, which works fine.
The only problem is that I would like the macro to wait until all calculations are finished (there's a bunch...) before running the macro. It would seem that the AfterCalculate event would help, but I can't seem to get the code to work correctly (or even at all). I'm pretty new at this... If anyone can give me a clue, I would greatly appreciate it! My searches on the message board and the web have come up pretty empty.
I'm running Excel 2007. Not sure if any other details are needed.
Run Before Close Event
Apr 7, 2009I have a MS Access db in which I have two delete queries called 'qrySessionsCompleted1' and 'qrySessionsCompleted2'. What VBA code can I use in the BeforeClose event to run these?
View 9 Replies View RelatedWorksheet Event
May 30, 2009I would like to run a some code that is only activated if another worksheet in the same workbook is selected and I'm not sure how to achieve it.
View 9 Replies View RelatedEvent Status
Dec 1, 2009I have a worksheet that I use to track course scheduling. I have 5 columns which contain dates. At the end I have a Event Status cell that i manually update based on which of my 6 date fields are filled in. I would like to have the Event Status automatically fill with a word as I add dates to the 5 columns. If there is a date in columns 1,2,3, and 4 the event status cell would update based on the date in column 4, dates in columns 1 and 2 - the event status would update based on column 2, etc.
Here are my column headers and what the event status says if there is a date in that column, and no dates in any column to the right of it.
Notional Start Date - Not Contacted
Declined Date - Declined
Contacted Date - Contacted/Working
Scheduled Date - Scheduled
Completion Date - Completed
OnZoom Event
Apr 19, 2006I want to be able to change the size of markers on a chart as the user zooms in and out. I know that I can trap the mouse buttons and check for the zoom that way, but is there an 'OnZoom' event that I can trap in case the user uses the toolbar or menu to zoom?
View 6 Replies View RelatedHyperlink To A Value
Feb 4, 2010I am trying to do is have a hyperlink go to another sheet after searching the second sheet for the same value. I have a sheet labeled "IQI" which has the total number of cases for a certain condition. I have another sheet labeled "IQI Cases" which lists out each case individually.
I want to be able to click on the Condidion in the IQI sheet and have that take me to that specific spot in the IQI Cases sheet where the cases for that condition begin.
Right now I just have a simple hyperlink to a range of cells. But each month a report is generated and the range will be different and I have to go and change the range each time. So I guess I want a hyperlink and a lookup function combination.
I dont know if this would be a Macro or a formula.
Hyperlink To PDF
Jan 10, 2005I am trying to use hyperlinks to navigate documents. I created a html document with excel and used hyperlinks to PDF documents.
At first the hyperlinks worked fine, opening the PDF software and in turn the PDF document.
Now when i click the hyperlink in Internet Explorer for the PDF document to open, it brings me to a blank HTML document.
In other words, the hyperlinks to the PDF's no longer open the PDF software and document.
Get Hyperlink Name
Oct 20, 2008Imagine if the word below was a hyperlink to a webpage somewhere;
House
I would like to know how to get excel to look at this paticular page and return that one word to a cell, so in this example, I would like cell A1 to to contain the word house.
I do not need any information about where the link is referring to, I already have this information.
All I need is for excel to look at this link and tell me what it is called.
Open Event Isn't Working?
Jun 19, 2013So I have a sheet that has a calendar control on it. I'm trying to make it so that when I open excel it automatically sets the calendar to todays date. I'm using the code:
VB:
Private Sub Worksheet_Open()
Calendar2.Value = Date
End Sub
If I click the play button the calendar changes to today's date. However, when I open excel it doesn't work. I saw screenshots online where the dropdown box to the right (in VBA) that lists the events had 'open' listed there. Mine does not. It appears as if the 'open' event is missing from the 'library'.
Calendar Event Notifications
Jul 31, 2008I have a calendar created as an excel workbook that currently has no functionality other than writing notes for specific dates. How can I get excel to show a message/popup/notification when the calender is opened up each time for what has been input as a note for the date today? The calendar has a year to view on one worksheet and then a month to view on subsequent tabs. please note i am a relative novice with excel.
View 14 Replies View Related