I have a problem in that in using the paste special on some links I created using HYPERLINK/VLOOKUP formulas the hyperlinks themselves have gone (ie nothing happens if you click on the data).
What I want is a macro that can turn a cell's contents into a hyperlink (i.e the location and friendly name are the same) by means of a simple keyboard stroke. I tried doing this using the macro recorder, but it didn't recognize when I was trying to paste the text into the Insert Hyperlink address bar and it just recalled the name of the address in the VBE window as if I'd written it in manually.
When I copy from Excel 2003 (values & formulas) and paste special into Excel 2007 i get the option screen to select unicode text,sylk etc instead of the other screen with the option of values,formulas,formats etc.How can I select the option for value,formulas? Sorry cannot attach a screen shot as it is above the allowed limit.
I have recently found that when I copy ranges (usually containing formulas), I only have the option of copying these ranges as text ( or vales). I can no longer copy formulas , (or formats, col width etc) in my excel worksheets.
This problem has only recently occurred and applies whether i have one or many spreadsheets open.
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
copy content from particular cells in the current sheet to the next available row in another sheet. I need to Paste the Values as the cells I am copying are equations. It was working great until I tried using it again today. For some reason I get the following error:
Run-time error '1004': Unable to get the Select property of the Worksheet class
Here is my code:
Code: Sub CopyCampaignMetrics() Range("A2:E2").Select Selection.Copy Sheets("Sheet2").Select("A" & Rows.Count).End(xlUp).Offset (1) Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
How would the code be changed below to be Paste Special Value? The numbers copied are changing every few seconds and I want a snapshot of it.
im TheRow As Integer Sheets("Loader").Range("C5:AC5").Copy TheRow = Sheet2.Range("A100").End(xlUp).Offset(1).Row If TheRow < 6 Then TheRow = 6 Sheet2.Cells(TheRow, 3).PasteSpecial If TheRow = 6 Then Range("B6").Value = 0 Else Cells(TheRow, 2) = Cells(TheRow - 1, 2) + 1 / 24 Cells(TheRow, 1).Value = Date ActiveWorkbook.Save LastSoon = Now + 1 / 24 '1 hr from last time Application.OnTime LastSoon, "Capture" 'set up for next hour
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) 'If you have any worksheet to exclude If Sh.Name = "Sheet2" Then Exit Sub With Target If Len(.Value) Len(Trim(.Value)) Then
MsgBox "You just entered a leading space character in" & vbCrLf & _ " cell " & .Address(0, 0) & "." & vbCrLf & vbCrLf & _ "If you intend to delete the value in that or any cell, " & vbCrLf & _ "please press the Delete button on your keyboard.", 16, " No leading spaces allowed !!"
Application.EnableEvents = False .Value = Trim(.Value) Application.EnableEvents = True End If End With End Sub When I tried to Copy>Paste Special > Formats or Values of more than One row this line highlights
If Len(.Value) Len(Trim(.Value)) Then That is, if I select C3:Q3, Copy, then select C10:C15 and try to do a Paste Special that is when it gives me an error 13: Type mismatch.
If I just select C10 and do the Paste Special, it's just fine.
I am trying to write a VBA code which will add any figure (say X) to the visible cells in the selected range. I am mentioning the visible part becuase my data might be filtered and thus. So far I have been able to figure out the following code(by recording a macro and then going behind the scenses to see the code):
Sub Add_X() Selection.SpecialCells(xlCellTypeVisible).Select Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlAdd, SkipBlanks:= _ False, Transpose:=False[/color] End Sub
The problem is that how can (if possible) I can pass a parameter to the above code (which will be X; as explained above). There might be many possible solutions??? However one that comes to mind is that when I selected a range of cells and then run my code, a dialog box should pop-up and ask for a # and then then take that # to add it to the visible cells of the selected range.
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
I have a macro that copies the main report sheet in my workbook. The point of the macro is to get a copy of the report data without allowing anyone to see the formulas/data behind it - when it pastes, it pastes only the values in the tables and then copies the charts, deletes the live ones, and pastes only the images back on the sheet. The macro works on my computer and my partner's computer, but not on anyone else's. It stops at this point:
During the execution of some code I come to a point where the properties of a range of cells needs to be converted to numeric (is at that point text). Normally I do that by adding a 1 in an cell nearby and use the copy/paste special method.
I was wondering if I can do that in a different way. Is it possible to define a MultiplyFactor as 1, and use this in paste special part.
I've got a sheet which has two column headings - Resources and Cost. I have another sheet which has the calculations for both of these. They are in cells H24 and D29 of the second sheet. I want to have a macro on the second sheet that if I click it, it will paste special these two figures (values only so no formulae), into the active cell on the first sheet. This is the code I've got so far but every time I run the macro it just pastes into the same two cells in the first sheet.
Paste Special is no longer available in the Edit menu--it's grayed out. (I am using Excel 2003). I can't find any info on what disabled it or how to re-enable. It's probably something moronically obvious, but this moron needs a shove in the right direction.
Got a bit of an issue with using the paste special function. I am trying to record a macro that would copy a group of cells that are verticle, and then paste them onto a new row in a different sheet.
I have done this in the past by enabling the record macro function and inserting a new row going back to the sheet with the data selecting the data copying it, and then selecting pasting area using paste special and enabling the "Transpose" box.
Although today i found this didin't work in fact it (this is the best i can describe it) merged each cell with the cell below givng a type of square function as can be seen below.
On my spreadsheet I want to move a column at the start of the day (as one column is todays values, the one previous is yesterdays). I have tried the following but it doesnt like it:-
Sub RQV() Dim warn As Integer warn = MsgBox("Do you wish to move RQV data to yesterday?", vbYesNoCancel) Sheet1. Unprotect Range("F2:F65536").Select Selection.Cut Range("E2").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Sheet1.Protect End Sub
It comes out with a run time error 1004? It needs to be a paste special as I just want the values put in. I have tried recording a macro to see how the vba code works, but it doesnt give me the option to paste special for some reason and I presume this is why the error occurs.
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
I have two excel tabs on a spreadsheet, one titled "Reviews" and one titled "Details". On my Reviews tab, I have:
A B C D 1 0 0 1 0 0 0 0 1 1 1 1 . . . . . . . .
etc.. On my Details tab, I have
A 1 0 1 . . . B 0 0 1 . . . C 0 0 1 . . . D 1 0 1 . . .
(The same information, but presented in different ways). I'm trying to continue to make my Reviews tab as long as possible to match my Details tab but when I drag the cross to continue the pattern, it doesn't follow what I need it to. How can I continue my Review tab down for 600 or so fields to match my Details tab even though they are both in different layouts?
I have a person who needs to be able to copy and paste values very frequently. She would like me to set up a personal macro on her PC that will allow her to be able to right-click in a cell and have a context item that is paste values so she does not need to go to the paste special dialog continually.
E.g: She selects a range from one workbook and copies it, She then selects a cell in a second workbook and pastes the values into the second workbook. She does not mind pasting the formatting, but she does not want to paste the formulas as there are many named ranges in the formulas and if she inadvertently pastes everything, all of a sudden the next time she opens her second workbook there are links to the first. All she wants in the second workbook are the values, not the formulas.