See attachment for full explanation of problems. I'm trying to get the correct sales tax when selecting a particular county. I can't get the vlookup to work and also I can't get the formula in the data validation of the county to work.
View 5 RepliesI'm trying to set up a Vlookup table for commission rates but all my answers are 0. What I'm trying to do is set up Vlookup to return total sales less than 700,000 have 0% commission, 700,000 to 749999 10%, 750,000-799,999 11%, etc. . The commission rate increases by 1% for each additional 50,000 in sales, with the highest commission rate 20%.
View 6 Replies View RelatedI need to get the sales volume from another worksheet but need to meet 2 criterias in both col A and B. How can I do it? Can I use Vlookup for this?
I'm attaching a file here. The cell highlighter in yellow is where I need the sales volume. First I have to find the region, then the brand of battery to get the sales volume.
I'm trying to create UK County heat map, however I can't seem to find example of one I could edit.
View 1 Replies View RelatedI use a lot of VLOOKUP formulae in the sheets i put together and, despite both the lookup value and table array being in the same format (usually text format), i often get an #N/A being returned.
Here's the fun part... if i then do something simple like access the lookup value cell (either by double clicking or pressing F2) and then hit return, then the vlookup calculation suddenly returns the correct value.
I'm convinced it's something to do with the way the cells are formatted but can't work out what.
Looking for some help to figure out what is causing our problem. My friend has created the attached excel sheet in Excel 2003. The issue is that the a vlookup does not seem to be finding the correct line for the value from the lookup table when it is returned twice.
Let me explain - The details are contained in the attached workbook. There are three sheets in the workbook - NH3Curve, Samples and Qvalue table.
On the Samples sheet, in cell C12 and C13 you can enter varying values. Go across to F12 and F13 and you will see that they both have the value 22.1. This is where the issue occurs - in cells G12 and G13 the lookup value should be the same - but it is not. G12 is actually returning the value for 22.0 not 22.1. (lines 173 and 174 on the Qvalue sheet). We cannot ferret out why this is happening.
Any help would be greatly appreciated. Sometimes when you look at something you can't see the obvious, so I hope it is that simple.
I have the following formula:
=IF(VLOOKUP(A10,'CORE Data 3 Month #1'!$A:$K,6,FALSE)<(VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)-((VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)*0.03))),'CORE Data 3 Month #2'!A3,IF(VLOOKUP(A10,'CORE Data 3 Month #1'!$A:$K,6,FALSE)>(VLOOKUP('CORE Data 3 Month #2'!$A:$K,6,FALSE))+((VLOOKUP(A10,'CORE Data 3 Month #2'!$A:$K,6,FALSE)*0.03)),'CORE Data 3 Month #2'!C3,'CORE Data 3 Month #2'!B3))
The strangest thing is happen. The part of formula underlined and the part bolded are identifical. For some reason, excel is unable to find the value in the underlined portion but is able to find the value in the bolded portion. As a result, I'm getting a #N/A result. how this can be corrected?
People usually keep track of their own points, however an official would need to confirm that they are correct before approving a purchase. However 99% of the time, people have the incorrect point totals.
I am currently working on a book to automate the system. It means players wouldn't have to keep track of their own points and that the point totals are always up to date. The first sheet in this workbook is a summary page which has player names, points from posting, bonus points, level up costs, purchase costs etc. Then there is a database with all the costs, which I pulled from the site. Then there are numerous record sheets, which have the player name, the item bought/levelup purchased, and the cost, which is pulled from the database via vlookup. Here is where it gets irritating.
On the summary page I attempted to use SUMIF in the total fields (total cost of purchases, total cost of leel ups etc). It would basically search the record for any entries with the name matching that of the player, and add the amounts associated with that entry. However it would always return 0. After doing some playing around I came to the conclusion that whilst the VLookup returns the correct values, functions like sum see them as 0. So instead of it going 5+7+7+10=29, it says 0+0+0+0=0.
How to get correct value using vlookup formula in duplicate look up values.
Here i mentioned a eg;
VlookUp_DuplicateValue.JPG
I have an excel sheet which has 70 sheets in it...All of them are numbered but not in a sequential manner (eg : 210,211,201,202,215 etc..).The numbering is nothing but the sales order number....
All the sheets have same data (i.e Column A contains Product Sold, Column B contains Sale Value)...The thing is i want to consolidate all the data in sales order number wise. i.e.
Column A Column B
201 $200
202 $300
203 $450
I am having problems with the function vlookup. I attached an excel file of my problem. It seems to pull the correct lookup, then it pulls the wrong data until a correct one occurs. My excel attachment should make more since of my problem. It will also pull data that is invalid. For example, the name "S5" is not a in my original data so it should not be able to find that?? Sorry, this is hard to explain - let me know if the file is not clear enough.
View 3 Replies View RelatedI am trying to determine the top contributors to 50% of sales based on cumulative percent of sales (see attached file). I can determine if percent of sales is less than 50%, but I need to include the person that pushes the group of top performers over the 50% mark.
View 3 Replies View RelatedI wanted to get the data from data sheet where i have entered the data manually for sales what have done
Now I wanted is when i enter date i should get the product and price in other sheet
Example:
If I enter date in a1 cell
I should get the detail of product in b1-b10(if i sold 10 item )which is in data sheet
And c1 - c10 price (if i sold 10 item @that price)
See the attachment. I want the percentage of Car Sales to total sales of different countries automatically.
View 2 Replies View RelatedI am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
CountyTownZipAbleTownA00000AbleTownB00001AbleTownC00002BravoTownD00003BravoTownE00004CountyTownZipMemberTownD00003BlackTownC00002FrankTownA00000GreeneTownB00001JonesTownA00000SmithTownC00006ThomasTownE00004White
This would consist of hundreds of Zips and Towns and this is just an abbreviated mock up.
I have two worksheets in one document. On sheet 'M_Admission' there are numbers for each week. can those numbers be automatically copied to the correct cell on sheet 2 'M_Actual' See the attached Excel worksheet to see what I mean. (Excel 2002)
View 3 Replies View RelatedI have a sales level that I need to track...My rolling 12 months' sales must be $85,000 and my currently monthly sales must be $7,000. I have a sheet that tracks the $85,000 and tells me what I need to achieve that, but I haven't figured out how to include the $7,000 monthly minimum....
The chart below is what I have. So for example, this month it's telling me I only need to sell another 3016.46 to hit the $85,000 rolling 12, but I actually need to hit $4821.79 to meet the $7k minimum.
Actual Rolling 12 Goal
Sep 2012 5,367.24 73,663.30
Oct 2012 5,649.93 69,496.28
Nov 2012 14,163.38 73,451.30 [code]....
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click()
With frmConference
.txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0)
.txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0)
.txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0)
End With
End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
How can I change this number for the actual Date?
I have daily basis monthly sales. Now I want to summarize into monthly gross. Pls look attached file. I am looking for a formula to summarize January daily sales from date 1st to 31 st as of just January and and sum of each day gross.
View 4 Replies View RelatedI have created a chart on excel for us to track daily sales but also to figure sales tax so we know what to send the IRS each month. We have been figuring the sales tax ourselves and
filling in the chart on excel but I would like to create a formula that
automatically does it for me based on total sales.
I am having trouble with a number of workbooks when using vlookup (using the wizard rather than entering the formula directly)
First I select the cell with lookup value, then try to select the table array on the source sheet but the cursor changes to the hand symbol and I can't click on any cells. I have had this problem with many different workbooks. The only solution I have found is to copy the whole sheet, paste-special-values into a new sheet and use that as source.
i have the following table, i want my Vlookup not only get the description from Column K but to get column K , L , M City and Country as well and put them in Columns D for Description, E for City and F for Country. would this be possible with Vlookup formula or any other formula?
View 3 Replies View RelatedI cannot solve with Excel 2010 and I have searched all over for the answer.
I have sales data that is approximately daily and would like to count the monthly data and summarize it as an average for the month in a separate column.
For example, I would like to turn this:
3/2/2005 $xxxx
3/5/2005 $xxxx
3/20/2005 $xxxx
4/2/2005 $xxxx
4/10/2005 $xxxx
Into this:
March 2005- $xxxx (monthly average)
April 2005- $xxxx (monthly average)
I have a feeling some 'countif' formula would work but I am not sure how to do this.
In cells A4 to A54, their names are displayed.
In cells I4 to I54, their total sales are displayed.
Starting in cell B59 and C59 I'd like to display their name and sales respectively.
Also in column I I'd have a second value which would be a total of each department. Would it be possible to leave this data out of the formula? No big deal if I have to put that value in the next column.
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies View RelatedI need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
Basically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.