If Statement Coupled With And
Apr 18, 2008
I am trying to write what I believe would be an if/and/or statement and seem to be not getting anywhere. There are about 8000 lines of data.
Basically, Cell C7 could have text values A, B, C, D or E.
Cell C8 could have text values A, B, C, D or E.
Cell C7 would never have the same value as C8.
In Cell D7, I would like a statement that says: If C7 = A or B and C8 = B or A, then Ok. If C7 = C or D and C8 = D or E, then ok. If not,then “not ok”.
View 9 Replies
ADVERTISEMENT
Apr 29, 2009
I have a data sheet, say in sheet1 as per table given below :
Sheet5 *ABCDEF1Sr.No.PeriodCAF / Account No.New MDN No.UserMonthly Charges23101/03/09 to 31/03/09180414408611111AA299.004**1804144086 Total**299.005101/03/09 to 31/03/09180414438122222BB299.006**1804144381 Total**299.007101/03/09 to 31/03/09281495759533333CC299.008201/03/09 to 31/03/09281495759544444DD299.009301/03/09 to 31/03/09281495759555555EE299.0010401/03/09 to 31/03/09281495759566666FF500.0011501/03/09 to 31/03/09281495759577777GG500.0012601/03/09 to 31/03/09281495759588888HH299.0013701/03/09 to 31/03/09281495759599999II299.0014801/03/09 to 31/03/092814957595100000JJ299.0015901/03/09 to 31/03/092814957595111111KK299.00161001/03/09 to 31/03/0928149575951222222LL299.00171101/03/09 to 31/03/0928149575951333333MM299.00181201/03/09 to 31/03/092814957595144444NN299.00191301/03/09 to 31/03/092814957595155555OO299.00201401/03/09 to 31/03/0928149575951666666PP299.00211501/03/09 to 31/03/0928149575951777777QQ299.0022**2814957595 Total**4887.0023101/03/09 to 31/03/0928204077031zz10.0024201/03/09 to 31/03/0928204077032xx5025301/03/09 to 31/03/0928204077033vv2026401/03/09 to 31/03/0928204077034cc4027501/03/09 to 31/03/0928204077035bb8528601/03/09 to 31/03/0928204077036nn8929701/03/09 to 31/03/0928204077037mm8430801/03/09 to 31/03/0928204077038kk2031901/03/09 to 31/03/0928204077039jj4032**2820407703 Total**438.00Spreadsheet FormulasCellFormulaA3=+A2+1F4=SUM(F3)F6=SUM(F5)A8=+A7+1A9=+A8+1A10=+A9+1A11=+A10+1A12=+A11+1A13=+A12+1A14=+A13+1A15=+A14+1A16=+A15+1A17=+A16+1A18=+A17+1A19=+A18+1A20=+A19+1A21=+A20+1F22=SUM(F7:F21)A24=+A23+1A25=+A24+1A26=+A25+1A27=+A26+1A28=+A27+1A29=+A28+1A30=+A29+1A31=+A30+1F32=SUM(F23:F31) Excel tables to the web >> Excel Jeanie HTML 4
I need to look up the CAF No. in Sheet2 table and count the MDN Nos. against the corresponding CAF Nos. from sheet1 as per table below.
Sheet4 *ABCD1Sr.No.PeriodCAF No.MDN Nos.2111/03/09 to 10/04/09180414408613211/03/09 to 10/04/09180414438114311/03/09 to 10/04/092814957595155411/03/09 to 10/04/0928204077039Spreadsheet FormulasCellFormulaA5=+A4+1 Excel tables to the web >> Excel Jeanie HTML 4
I tried using vlookup formula but unable to get the right syntax.
View 9 Replies
View Related
Jul 28, 2012
I need to lookup the last date coupled to a serial number but with vlookup it takes the first serial number from the top of the database. Is this at all possible?
View 3 Replies
View Related
Jul 28, 2009
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View 5 Replies
View Related
Oct 1, 2008
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies
View Related
Feb 14, 2012
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
View 9 Replies
View Related
May 5, 2014
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
View 5 Replies
View Related
Jan 6, 2009
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
View 9 Replies
View Related
Mar 18, 2014
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
View 2 Replies
View Related
Jun 13, 2009
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
View 3 Replies
View Related
Apr 25, 2007
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
View 9 Replies
View Related
Jul 3, 2007
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
View 7 Replies
View Related
Apr 22, 2009
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
View 5 Replies
View Related
Jul 27, 2014
What I'm trying to have happen is when I enter a cost ($50,000-$240,000) in Sheet 1, I want the fees (cell B2) to correspond to what they are on sheet 2. How should I set up an if statement for this?
View 3 Replies
View Related
Sep 1, 2008
How do I write an if formula for the below example. X = A Week Number. If(X is between 1 and 4,"Y","N").
View 2 Replies
View Related
Oct 13, 2008
Here is what I have right now, =if(i3:i133="MLB"&if(b3:b133="W",c3:c133))
Basically the statement needs to contain two "ifs". I have a column that has MLB, CFB, NFL, etc and a column that designates wins and losses. So, what I am trying to make it do is say if i3:i133="sport" AND if b3:b133="W" then add those up.
View 3 Replies
View Related
Dec 11, 2008
I have a sheet where A2 is machine name A3 needs to put a -1 if A2 is either Machine 1 or Machine 2. I looked and cant find what I need. I know this should be a no brainer but having problems. here is what I have
=IF(A2="Machine 1",-1,"") or IF(A2="Machine 2",-1,"") this doesnt work
I have also tried something I found
=IF(OR(A2="Machine 1",A2="Machine 2"),-1,"")
View 3 Replies
View Related
Jun 11, 2009
How do i say if x is not equal to #value! in a formula? In the context of...@search() returns #VALUE! when the search string is not found. So: =OR(SEARCH("price",$A4) **NOTEQUALTO#VALUE!** ,SEARCH("pricing",$A4) **NOTEQUALTO#VALUE!**)
View 5 Replies
View Related
Sep 8, 2009
=IF(ISBLANK(G9) or ISBLANK(H9),"",(G9+H9)/F9)). How can I get the above if statement to work?
View 4 Replies
View Related
Jan 5, 2010
If d6 and d7=0 then put 0 but if one of them contain any other value then roundup as below based upon the cell with the different value. I current have this formulae:
=IF(Parameters!D6=0,0,ROUNDUP((Parameters!D6*1000)/Parameters!D11,0))
View 3 Replies
View Related
Aug 19, 2008
I am trying to do and IF within an IF like i could do in java. Although i unsure now to whether this can be done within VBA and whether the syntax i am using is correct.
The situation is that i have to two cells with a list of information within them both.
For example cell (2, B) has options 1, 2 and 3 & cell (3, B) has options a, b and c.
If option "1" is selected then either option "a", "b" or "c" can be selected that will therefore show different information in another cell within the worksheet.
View 13 Replies
View Related
Nov 30, 2008
I want to create code that will check if a number of cells is empty and if they are to call a sub. If any of the cells are not empty then call another sub.
View 11 Replies
View Related
Mar 18, 2009
I am looking to get my vb code to do a simple thing, i need it to look at a date on my excel doc and to flag a messagebox that it cannot run due to date passed only if the date is exceeded and to stop at that point.
View 4 Replies
View Related
Aug 12, 2009
I have a bit of code in which I am trying to use the or statement. I've tried a couple of methods but neither seem to work. Is "or" a valid command in VBA?
View 3 Replies
View Related
Sep 15, 2008
In column "AN" I would like to put an If statement together something like
this: =IF(AK4="NO",AA4,AA4-AA4). The problem is that I get an "#VALUE" error if there is no data in column "AK" for which this formula is based. Ideally I need the "#VALUE" to go away even if the specific cell in column AK is blank, due to the fact that I need to eventually sum the totals in column "AN4:AN150", which the "#VALUE" error prevents me from doing.
View 4 Replies
View Related
Jun 10, 2013
I have the following code but do not know how to put the formula in:-
The formula i want to use is:
Code:
=IF(A3=A2,IF(B3=B2,G2+1,1),1)
my attempt at putting it into VBA is:
Code:
Sub test() Dim lastRow A
s Integer
Dim rngSeq As Range
Dim i As Range
lastRow = Range("A3").End(xlDown).Row
With ActiveSheet
[code].....
View 9 Replies
View Related
Mar 9, 2008
Im using this For next statement but doesnt work. Im trying to sum up A1:B1 in C1 and so on. Im trying to figure out the For Next statament so would appreciate your input.
Sub Mac1()
Dim r1 As Range
Set r1 = Range("a" & i, "b" & i)
Dim i As Integer
i = 1
For i = 1 To Range("a1", Range("a1").End(xlDown))
Application.WorksheetFunction.Sum (r1)
i = i + 1
Next i
End Sub
View 9 Replies
View Related
Oct 31, 2008
I need a formula that will sum if certain criteria are true:
If column AY = FLOOR and Column BH = NicK then sum column AW. I have tried sumif, sumproduct and if(and. Nothing is working for me.
View 9 Replies
View Related
Feb 11, 2009
Is it possible to have an if function that doesn't have an else part to it? So if your criteria is true, assign a value, if it becomes not true, don't do anything, just leave the value as is. Example: =if(a1=1, sum(a1:a5))
View 9 Replies
View Related
Sep 22, 2009
is it possible to check a value cell vs value in a range? something like this.
If Range("F65536").End(xlUp) Sheets(2).Range(Range("G2"), Range("G65536").End(xlUp)) Then
MsgBox (Check total)
End If
I am working with two worksheet workbook. sheet one has a cell which contains the total amount value from sheet two and sheet two has the details for the total in one column.
View 9 Replies
View Related
