I have D4=0.42. I thought this formula =IF(D4<0.38,"Thin",IF(0.38<D4<=0.48,"Good shape","Bad shape")) was supposed to give me "Thin" for D4<0.38, "Good shape" for 0.38<D4<=0.48 and "Bad shape" for the contrary, but it only gives me "Bad shape" when D4 is clearly between 0.38 and 0.48.
View 4 Replieswhen i run the below code i get an error 438 'object doesnt support this property or method'
View 2 Replies View RelatedOn the attached spreadsheet there is two irregular shapes. "Area1" & "Area2". I need to be able to determine which area the "ball" shape is located in. If the ball is in Area1 then "Multiply 8" gets the ball and "Multiply 9" moves to the blue cell "AH39". If the ball is in "AreaB" Multiply 9 gets the ball and "Multiply 8" runs to cell "S37"
I should be able to do the moving of the shapes using all the samples, its determining which area the ball is in is the problem.
In the real spreadsheet i will probably have around 10 different Areas.
Move Two Objects - Select Case.xlsm
I have a few dates and one Total value. I need to distribute this Total Value in such a way so I can get the same shape S curve (Date vs Value).
View 4 Replies View RelatedI am trying to get different shapes (previously created) to appear in a certain cell, dependant on the resultof a formula in an adjacent cell.
View 4 Replies View Relatedcode doesn't work
Sub test()
If ActiveSheet.Shapes.Name = ("five") Then
Range("B4").Select
Else
Exit Sub
End If
End Sub
I have a shape in Excel called Canada. I grouped it with another shape and want this new grouping to be called Canada. But when I enter Canada in the shape name entry box, it doesn't actually change it (as it thinks I am referring to the existing Canada).
I need something like Names manager, but for shapes, not ranges.
Is it possible to find out if the selected item is a textbox through VB?
Is there any way that I can get the name of the shape i just clicked to call a procedure?
I have 35 shapes in my Worksheet.
Each shape has a different name. Each shape has a macro procedure assigned, wich do almost the same procedure (with just small differences, depending on from wich shape the macro was called).
I want to make just one macro procedure and catch from wich shape the macro was called.
How do i Keep shape where it is no matter if i scroll up or down.
Sub KeepshapeStatic()
Dim ws As Worksheet
Dim shp As Shape
Set ws = Sheets("Sheet1")
Set shp = ws.Shapes("MyShape")
'How do i Keep shape where it is no matter if i scroll up or down
End Sub
i am trying to draw a shape (square or rectangle) using vba textbox's i have managed to draw 2 of the 4 lines.
i am stuck on the ShapeRange.Flip msoFlipHorizontal codeing.
i have attached a example of what iam trying to do.
the coorinates from the last line enterd are saved to sheet1 for use with the next line entered ...
I want to create a shape connecting them and place that shape on a userform. I can create the area without any problems on a worksheet using ActiveSheet.Shapes.BuildFreeform but I don't know how to get it onto my userform.
I have looked through previous posts on similar topics and seen responses that it's as easy as copying the shape from the worksheet and pasting it into an image or frame on the userform. I can copy the shape to the clipboard without any problem. However, when I try to paste it onto an image or frame in a userform I get a message saying that the object doesn't support the use of paste. I've tried using both Selection.Copy and Selection.CopyPicture xlScreen, xlBitmap thinking it might treat a bitmap differently. When I paste I'm trying both UserForm1.Frame1.Picture.Paste and UserForm1.Image1.Picture.Paste but neither work, even though I have blank images and frames with those names on my form.
I have put a rectangle shape in a cell in excel. The shape is within the border of a particular cell.
Is there a way to find the reference of the cell on which that particular shape resides.
For example, I have kept a rectangle shape in cell F5. I was looking for a macro which would return the cell reference "F5" in which the shape resides.
I really dislike the look of the command buttons and would like to use a nice flat-looking Shape into a functional button.
View 3 Replies View RelatedIs there any way to place a Control Tip for a shape on a excel worksheet?
View 3 Replies View RelatedHow to draw multi Arc Shape in Union group Locks Like (Smiley Face 11)
View 2 Replies View RelatedI have a shape object which is created dynamically.
Now onAction event of the shape object, I need to get the cells row and column number where the shape object is sitting. How can i get it?
how do i check if a shape exists?
i have a shape created by a macro.
sShape
so when i get rid of this shape i use
How does one access the properties of a shape? For instance getting the text on a button ( from the forms toolbar ) on a worksheet. This works
View 4 Replies View RelatedHave an .xls file with multiple sheets and many objects (Shapes) on of those sheets.
The objects are all rectangles, some of which contain text frames, where I had entered manually some text.
Also, each shape has a name.
Now, I want my VBA Macro to take a specific shape (using its name), and find out if it has text frame in it.
How do I capture which hyperlink has been clicked (selected in any fashion)?
Then get associated shape name.
I have a macro which hides rows in excel. The lines that I am hiding have a "Rounded Rectangle" shape inserted with a hyperlink. I want the shapes to be hidden as well when I hide the rows. However, when hiding the rows, the shapes persist. Is there a way to hide the shapes as well?
I am hiding the rows via the following vba code...
If Range("CurrentVersion").Value = "1" Then
Rows("20:25").EntireRow.Hidden = True
Else
Rows("20:25").EntireRow.Hidden = False
End If
I am trying to get an inputbox name a shape within my workbook. This is what I have so far and i am getting a Run-time error ("The specific value is out of range") on the part in red.
Code:
Dim MyInput
Sheets("List Form").Select
ActiveSheet.Shapes.Range(Array("BlankTestButton")).Select
Selection.Copy
Sheets("For Copy").Select
Range("A36").Select
ActiveSheet.Paste
[code].....
I have many spreadsheets that use shapes such as arrows and other symbols. The process for these spreadsheets is to move the shape (arrow for Ex) to indicate a specific location of pain or something like that.
Once the arrow is in position, the spreadsheet is printed to PDF and and a snapshot (in adobe) is "taken" and the picture (with the arrow) is pasted into our application.
My questions is how can I move the shapes back into position when you want to do it all over again.
When I have a few shapes I use
PHP Code:
Set sShape = ActiveSheet.Shapes("Right Arrow 6") 2
With sShape
.Top = 220
.Left = 91
.Rotation = 20
End With
For each shape
But if I have lots of shapes, 50+, it's a bit more cumbersome.
Can I loop through the shapes when I enable the macros to pick up the current positions and use that information when I do a reset (loop back again to move any shape that were touched back to where it was when the spreadsheet was opened?
Currently I have them close the spreadsheet without saving and just reopen.
Is there an automatic / easy way to get the area of a shape in excel (using vba or otherwise)?
View 1 Replies View RelatedI Have several images on Sheet 1, I can copy the needed Images to sheet 2 as needed.
Once the image is pasted to sheet2 how do I assign it to a shape variable so that I can position it as desired.
I do not want to have to use Sheet2.(Range("B2").activate or similar
I'm looking to use
Shp.top = 25
Shp.left =15
Code:
Sub Macro1()
Dim Shp As Shape
Sheet1.Shapes("Picture 1").Copy
Sheet2.Paste
'To set the shape variable to the shape on sheet2
Set Shp = "WHAT GOES HERE"
Shp.Top = 25
Shp.Left = 15
End Sub
I have a series of shapes (circles) that I wish to use as a substitute to the radio buttons found in the form controls (too small).
I've drawn the shapes, but wish to manipulate their properties in VBA. For example, when the user clicks on the shape, the macro includes VBA which will change the properties to include colour and fill. Of course, clicking it again, will send it back to the default.
How can I get the VBA of the current shape's (default) properties? Where can I find a list of the VBA properties available to any particular shape so I know what fields are available to set attributes to?
I am trying to have 8 various shapes placed on running pages alphabetically, ie 8 modules to a page being 2wide by 4 high. There would be say 200 entries of various combinations and names equating to 80 pages If these can be sorted alphabeitically by name then placed on subsequent pages. Is this possible in excel or in "VB"
View 9 Replies View RelatedIs it possilbe to change the shape of a cell to a circle?Or is there a way you can make a shape act the same as one of your cells?
I am trying to create a table of contents for a very long list of items on a sheet. I am using shapes on a seperate sheet to act as buttons, that go to the location on the correct sheet using a hyperlink. I found how to add a hyperlink using a macro, but I can't find how to create a hyperlink for the shape using a macro.
What is the code I would need to set a hyperlink to "Sheet1!A2:Sheet1!C2", with the a tooltip of "Some text"?
Here is how I create the shapes:
With myDocument.Shapes.AddShape(msoShapeRoundedRectangle, 10, IntVerticalOffset, 630, IntHeight)
.Fill.ForeColor.RGB = RGB(204, 255, 204)
.Line.ForeColor.RGB = RGB(0, 0, 0)
.TextFrame.Characters.Text = StrRowName
.TextFrame.HorizontalAlignment = xlHAlignLeft
.TextFrame.Characters.Font.ColorIndex = xlAutomatic
.TextFrame.Characters.Font.FontStyle = "Bold"
.Locked = True
End With