i am trying to draw a shape (square or rectangle) using vba textbox's i have managed to draw 2 of the 4 lines.
i am stuck on the ShapeRange.Flip msoFlipHorizontal codeing.
i have attached a example of what iam trying to do.
the coorinates from the last line enterd are saved to sheet1 for use with the next line entered ...
I struggle with my old excel (2003). There is a thing i have to do: put arrows from one sheet which will change its color depending on data, written in some fields. Also there is a task to put these values inside created arrows. I put values using commands:
Worksheets("Map").Shapes("COL").Select
With Selection.Characters
.Text = Range("Data!E4").Value
Arrows are drawn in different angles using drawing tool. So i need to rotate the text inside the arrows respectively to angle of the arrow rotation. So how is it possible to rotate text inside that shape?
when i run the below code i get an error 438 'object doesnt support this property or method'
View 2 Replies View RelatedNeed excel formula (not a marco) to rotate the names in the roster.
View 2 Replies View Relatedis it possible to rotate a graph. i need to turn my stacked cone graph upside-down so that the point is facing down and not up
View 2 Replies View RelatedI am rotating an image on a userform by uploading different gif images to simulate the rotation. There is an annoying screen flicker around the image when changing images that I would like to get rid of if possible. how to get rid of the flicker or a different technique I could use to rotate an image? 1st attempt - uploading different pictures
For h = 1 To Sheets("Bar Contents"). Range("B" & ItemRow) Step 1
PictureLocation = ThisWorkbook.Path & "PicturesTransparent" & Sheets("Bar Contents").Range("C" & ItemRow) _
& " " & h & ".gif"
GameUserForm.DrinkAnimation.Picture = LoadPicture(PictureLocation)
Sleep 50
DoEvents
Next h.........................
On the attached spreadsheet there is two irregular shapes. "Area1" & "Area2". I need to be able to determine which area the "ball" shape is located in. If the ball is in Area1 then "Multiply 8" gets the ball and "Multiply 9" moves to the blue cell "AH39". If the ball is in "AreaB" Multiply 9 gets the ball and "Multiply 8" runs to cell "S37"
I should be able to do the moving of the shapes using all the samples, its determining which area the ball is in is the problem.
In the real spreadsheet i will probably have around 10 different Areas.
Move Two Objects - Select Case.xlsm
I'm trying to rotate the cells (not just the text in the cells) to a 45-degree angle. I'm using 2007 excel. Can this be done?
View 3 Replies View RelatedHow do I rotate sheet tabs 90 degrees?
View 1 Replies View Relatedhow to rotate a label to a 45 degree angle on a user form.
View 9 Replies View RelatedHow to rotate the contents of columnes upside down, I want the bottom values to be at the top and vise varsa.
View 9 Replies View RelatedI have data map in excel. I want to create a program to flip the data map. The data from the top of the data map will flip to the bottom of the map and the data from the bottom will flip to the top of the map. The process is like a mirror reflection.
Like example:
after a command button is clicked, the data will changed to be like this:
I am trying to chart a range of dates, for example. I have some boats that are on contract between dates a and b. I would liketo plot several boats with their contract date range. I have tried using a bar chart, but all the lines start at 0. I got it working using an Excel 2007 Stock chart, however, it is in the wrong orientation. I would like to Rotate the Chart 90 degrees, swap the axis, or find a better method all together. I cannot post the spreadsheet as its confidential.
View 2 Replies View RelatedI have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
how to rotate a object in excel, by typing the rotation angle in excel.
View 1 Replies View Relatedas the title says, i need to rotate a range but to keep all defined names (single cell or range) consistent.
i.e.
lets say i have the following cells filled:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
now i have a few defined ranges. lets say:
range name, refers to
mycell1row1, A1
mycell90roanything, B1
mysomething, C1
mysomthingrange, A1:F1
etc.
what i need in the end is this:
1 1 1 1 1 1 1
2 2 2 2 2 2 2
3 3 3 3 3 3 3
4 4 4 4 4 4 4
and for defined names:
mycell1row1, A1
mycell90roanything, A2
mysomething, A3
mysomthingrange, A1:A7
Problem: Have a squad of 8 players in my darts side. We have 12 games in our season and each game requires 4 players so each player will play 6 games. 6 of these games are at home and 6 are away.
I want to create an excel sheet whereby a team will be picked for each match. Each player will play at Home and Away 3 times each. And the same group of players will not play with the other players each time.
eg. Week 1- Team Players, 1, 2, 3, 4
Week 2 - Team Players 5,6,7,8
Week 3 - 1,3,5,7
Week 4 - 2, 4, 6, 8 etc.
Where to start. There are multiple variables.
I have created a table in Excel that I want to import in a word portrait page, but would like to rotate it to 90 degrees.
I would like the table to take the whole page and that I still have some space above the table to put table number and description.
I have uploaded the table in excel and a screenshot of the way I would like the table to appear in word file.
I'm looking for vba code to use that will incrementally rotate an image based on values entered within a cell of an Excel spreadsheet.
I have two graphics, one is the face of a dial and the other is the pointer very much like a speedometer. I can achieve the desired outcome using two excel charts, one overlaid on top of the other, but, this doesn't give me the visual effect I'm looking for.
I'm using the face of the semicircle dial as the background image and I have a separate image for the pointer. When a value between 1 and 100 is entered in cell O3 i would like the pointer to rotate to that position on the dial. The pointer is to have a fixed position and arc left to right where the value of 1 is left-most and horizontally aligned, and for the value 100 the pointer would point in the opposite direction.
First I will post the data:
Weekly Roster
F98AKHTAR99DEEPAK100NAPA'A101OUKASH102ROBINSON103RUSSELL104SALUNI105S
PARTIATIS106SPICE107TAN108TORRES. Jr109VAN STEEN110ACCIARITO111112113114115116117118119120
In this data, as you can see there are a lot of cells/rows that are empty. I have a macro that will copy the cells F98:F120 to F99:F121 and then copy F121 to F98, and finally delete the value from F121. In this case, it will give me a blank cell at the top and the data hasn't rotated really. All the names will be in same position.
But I DON'T want that. I want the macro to look for the last cell/row with a valid value in it and rotate the cells so that I end up having ACCIARITO at the top and everybody else to move down one row.
I want to rotate an arrow image to exactly a value entered in a cell (dropdown of values between 0 and 180)
e.g. if the value is 0 it should point south, if East or West 90+ or - and if pointing North 180. Also all value between these e.g. 45 for South East or South West etc.
I need some VBA I guess to do this but I don't know how.
When the arrow has stopped, I need the macro to end cleanly so that the user can input other values.
Is this even possible?
I have D4=0.42. I thought this formula =IF(D4<0.38,"Thin",IF(0.38<D4<=0.48,"Good shape","Bad shape")) was supposed to give me "Thin" for D4<0.38, "Good shape" for 0.38<D4<=0.48 and "Bad shape" for the contrary, but it only gives me "Bad shape" when D4 is clearly between 0.38 and 0.48.
View 4 Replies View RelatedI currently rotate through 3 values of XXX (i.e., 0, 1, and 2) like this:
For XXX = 0 To 3
What should I write if I want to rotate only through XXX values of 0, 2, and 3?
Should I write:
For XXX = (0, 2, 3)?
Not sure it'll work...
code doesn't work
Sub test()
If ActiveSheet.Shapes.Name = ("five") Then
Range("B4").Select
Else
Exit Sub
End If
End Sub
I have a shape in Excel called Canada. I grouped it with another shape and want this new grouping to be called Canada. But when I enter Canada in the shape name entry box, it doesn't actually change it (as it thinks I am referring to the existing Canada).
I need something like Names manager, but for shapes, not ranges.
Is it possible to find out if the selected item is a textbox through VB?
Is there any way that I can get the name of the shape i just clicked to call a procedure?
I have 35 shapes in my Worksheet.
Each shape has a different name. Each shape has a macro procedure assigned, wich do almost the same procedure (with just small differences, depending on from wich shape the macro was called).
I want to make just one macro procedure and catch from wich shape the macro was called.
How do i Keep shape where it is no matter if i scroll up or down.
Sub KeepshapeStatic()
Dim ws As Worksheet
Dim shp As Shape
Set ws = Sheets("Sheet1")
Set shp = ws.Shapes("MyShape")
'How do i Keep shape where it is no matter if i scroll up or down
End Sub
I want to create a shape connecting them and place that shape on a userform. I can create the area without any problems on a worksheet using ActiveSheet.Shapes.BuildFreeform but I don't know how to get it onto my userform.
I have looked through previous posts on similar topics and seen responses that it's as easy as copying the shape from the worksheet and pasting it into an image or frame on the userform. I can copy the shape to the clipboard without any problem. However, when I try to paste it onto an image or frame in a userform I get a message saying that the object doesn't support the use of paste. I've tried using both Selection.Copy and Selection.CopyPicture xlScreen, xlBitmap thinking it might treat a bitmap differently. When I paste I'm trying both UserForm1.Frame1.Picture.Paste and UserForm1.Image1.Picture.Paste but neither work, even though I have blank images and frames with those names on my form.
I have put a rectangle shape in a cell in excel. The shape is within the border of a particular cell.
Is there a way to find the reference of the cell on which that particular shape resides.
For example, I have kept a rectangle shape in cell F5. I was looking for a macro which would return the cell reference "F5" in which the shape resides.
