Shape A Textbox
Apr 1, 2008Is it possible to find out if the selected item is a textbox through VB?
Is it possible to find out if the selected item is a textbox through VB?
i am trying to enter the EndX coordinates (The third number: 500) by entering a number in a forms textbox
ActiveSheet.Shapes.AddLine(0, 100, 500, 100).Select
how can i break the code up to enter the coordinates via textbox's
I have a picture in my spreadsheet which slight tilted. I want to add a text box on to that shape and add some text but i want the text to be angled the same shape as my picture.
If I create and rotate my text box manually, the default rotation makes it rotate slight to much.
I was hoping if I could add a custom drawing of a text box so the text can be the same a picture.
when i run the below code i get an error 438 'object doesnt support this property or method'
View 2 Replies View RelatedOn the attached spreadsheet there is two irregular shapes. "Area1" & "Area2". I need to be able to determine which area the "ball" shape is located in. If the ball is in Area1 then "Multiply 8" gets the ball and "Multiply 9" moves to the blue cell "AH39". If the ball is in "AreaB" Multiply 9 gets the ball and "Multiply 8" runs to cell "S37"
I should be able to do the moving of the shapes using all the samples, its determining which area the ball is in is the problem.
In the real spreadsheet i will probably have around 10 different Areas.
Move Two Objects - Select Case.xlsm
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have D4=0.42. I thought this formula =IF(D4<0.38,"Thin",IF(0.38<D4<=0.48,"Good shape","Bad shape")) was supposed to give me "Thin" for D4<0.38, "Good shape" for 0.38<D4<=0.48 and "Bad shape" for the contrary, but it only gives me "Bad shape" when D4 is clearly between 0.38 and 0.48.
View 4 Replies View RelatedIs there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies View Relatedcode doesn't work
Sub test()
If ActiveSheet.Shapes.Name = ("five") Then
Range("B4").Select
Else
Exit Sub
End If
End Sub
I have a shape in Excel called Canada. I grouped it with another shape and want this new grouping to be called Canada. But when I enter Canada in the shape name entry box, it doesn't actually change it (as it thinks I am referring to the existing Canada).
I need something like Names manager, but for shapes, not ranges.
Is there any way that I can get the name of the shape i just clicked to call a procedure?
I have 35 shapes in my Worksheet.
Each shape has a different name. Each shape has a macro procedure assigned, wich do almost the same procedure (with just small differences, depending on from wich shape the macro was called).
I want to make just one macro procedure and catch from wich shape the macro was called.
How do i Keep shape where it is no matter if i scroll up or down.
Sub KeepshapeStatic()
Dim ws As Worksheet
Dim shp As Shape
Set ws = Sheets("Sheet1")
Set shp = ws.Shapes("MyShape")
'How do i Keep shape where it is no matter if i scroll up or down
End Sub
i am trying to draw a shape (square or rectangle) using vba textbox's i have managed to draw 2 of the 4 lines.
i am stuck on the ShapeRange.Flip msoFlipHorizontal codeing.
i have attached a example of what iam trying to do.
the coorinates from the last line enterd are saved to sheet1 for use with the next line entered ...
I want to create a shape connecting them and place that shape on a userform. I can create the area without any problems on a worksheet using ActiveSheet.Shapes.BuildFreeform but I don't know how to get it onto my userform.
I have looked through previous posts on similar topics and seen responses that it's as easy as copying the shape from the worksheet and pasting it into an image or frame on the userform. I can copy the shape to the clipboard without any problem. However, when I try to paste it onto an image or frame in a userform I get a message saying that the object doesn't support the use of paste. I've tried using both Selection.Copy and Selection.CopyPicture xlScreen, xlBitmap thinking it might treat a bitmap differently. When I paste I'm trying both UserForm1.Frame1.Picture.Paste and UserForm1.Image1.Picture.Paste but neither work, even though I have blank images and frames with those names on my form.
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I have put a rectangle shape in a cell in excel. The shape is within the border of a particular cell.
Is there a way to find the reference of the cell on which that particular shape resides.
For example, I have kept a rectangle shape in cell F5. I was looking for a macro which would return the cell reference "F5" in which the shape resides.
I have a few dates and one Total value. I need to distribute this Total Value in such a way so I can get the same shape S curve (Date vs Value).
View 4 Replies View RelatedI really dislike the look of the command buttons and would like to use a nice flat-looking Shape into a functional button.
View 3 Replies View RelatedIs there any way to place a Control Tip for a shape on a excel worksheet?
View 3 Replies View Related