Is there a simple solution, by changing something in the button properties? My current code below allows data from a userform to goto specific sheets and cells. Currently my option button named winbutton if true will display "true" in cell. i need it to be numerical value "1".
View 3 RepliesHow do I set the default optionbutton out of 5 inside a frame?
View 2 Replies View RelatedIf the result of cell B1 is true then YES if not NO?
I know I can use the formula: =IF(B1="Yes","YES","NO") but I'm looking for the TRUE or FALSE result.
Sheet1
AB110Yes2 3 NO
Spreadsheet FormulasCellFormulaB1=IF(A1>5,"Yes","No")B3=IF(B1=TRUE,"YES","NO")
Excel tables to the web >> Excel Jeanie HTML 4
In a worksheet I want that a link changes, after I change a value in another cell.
Example:
When cell A1 is 2006_04 the link should be:
C:/2006/2006_04/[...xls]Page1'!A1
When cell A1 is 2006_05 the link should be:
C:/2006/2006_05/[....xls]'!Page1!A1
When I do a SEARCH operation to find the number 10 among hundreds of cells containing data, I'm often finding the way Excel highlights the cell that meets the search result is not easy enough to see.
Is there anyway I could setup Excel so that the resulting cell that meets the search result is highlighted in a RED border or RED Fill? I would like the cell that meets the search result to scream at me with a color highlight that is not easy to miss.
Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???
Here is an example...
In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:
=IF(B1>0;((A1)*(B1)*0.15);0)
At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
I have a formula that I'm trying to utilize VLookup to determine a specific bonus. The issue I'm having is when looking for the closes match, it is returning the value below where it should because it's rounding down. For example, the string I have reads:
=VLOOKUP(S5,'Rep Daily'!A1:B61,2,TRUE)
The value it's defining is 17.7485, so it's returning the bonus for 17.5 instead of 17.75. Even when I use the =Roundup function, it's showing 17.75 in the cell but the actual value of the cell is 17.7485 so VLookup is returning the lower of the two values.
Is there a way to copy a formula result as the actual value and not the formula,
I can do copy and paste using "value" option but would like an automated formula or code option if possible.
In the example, D4 copies C4, would like D4 to show "AB" and not the formula "=C4"
I want to run a macro if the result of an IF function is true.
E.g. cell J55 contains =IF(H55>I55,"Goodbye","")
H55 contains =NOW()
I55 contains =DATE(2012,12,31)
Now by changing the dates etc. it prints Goodbye.... simple enough, but what I want is for it to run a macro that selects a range from the previous year's figures and simply changes the fill colour on the range. The macro for this also works fine.
I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.
I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.
Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)
Syntax error here:
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I am new in Excel VBA and im trying to find a way to get back a result "True" or "False" when I have password, wich must consist of 6 letter, one upper case letter and a number must be in it. When this word consist of 6 letters and has a uppercase letter and number the result is True and this will be written into the cell next to the cell where the password is.
View 2 Replies View RelatedI am trying to create a formula to count the number of time the word "NEW" appears in one column, provided the result of another column gives a certain answer. Sample of my problem and question in detail on attached.
View 2 Replies View RelatedI've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
I want to make a spreadsheet with bets of mine and my friends (picture). How to make cells D4, D5, etc., change to Win or Loss depending on the result?
Attached Image : Bets.jpg
I am trying to write a formula using If statement to output the result "True".
I have 4 columns (P3, T3, AD3, AK3) that store a value of either "Yes" or "No", I want to check the column if they are equal to "Yes". I have written a formula but it only works for 1 column at the minute, i not sure how to add the other columns into the formula:
=IF(P3="Yes","True")
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have two option buttons on each of five spreadsheets in my Excel workbook. Selecting the first option button enables an x to be written to a cell when that cell is clicked with the mouse. Selecting the second option button disables the writing of the x when the cell is clicked with the mouse. I have these working quite well.
My problem is that I want the second option button selected (disable writing of x) when I enter the sheet. I'm pretty certain that I need the code in Sub Worksheet_Activate() but I haven't been able to find the VBA statement to set the second option button on.
Also, unlike having the option buttons on a form, when I select the option button on the spreadsheet in Design mode I can see no property sheet indicating the name, value, etc of the option button.
I have 5 Optionbuttons (in userform) named: Sheet1, Sheet2, Sheet3, Sheet4 and Sheet5.
When I open workbook Optionbutton1 (Sheet1) is activated, but what kind of loop(?) I need, if I want activate same named optionbutton than activate sheet.
Example: I activate sheet3 then Optionbutton3 (named sheet3) have to activated also.
I tried simple codes,
First worksheet:
Private Sub Worksheet_Activate()
OptionButton1.Value = True
End Sub
Second worksheet:
Private Sub Worksheet_Activate()
OptionButton1.Value = False
OptionButton2.Value = True
End Sub
I have a userform on which there is a frame containing 8 option boxes. After a query, the results are displayed in the form. If I have a value of 1 in a cell, optionbox1 is checked; a value of 2 checks optionbox2, etc. It works great EXCEPT when first initialized. At that point, it checks the last optionbox, even if the number is 1. I have built a next and previous feature to scan the data, and when I return to the first entry, the correct box is checked. I tried coding blanks into the fields prior to populating them, but I still get the same results. Is there some explanation available so that I may remedy this? I'd really like the first piece of data to be correct.
View 2 Replies View RelatedI have a workbook containing several sheets, each sheet has a large number of ActiveX check box controls on it.
The controls are presented in groups of three to capture responses to a question (Y/N/NA). If one of the three check boxes is set to True, the other two associated check boxes must be set to False.
What I want to do is avoid having to have an On_Click event sub for every single check box.
I have written a function that will handle updating the related check boxes but I am unsure how to call this function, passing it the name of the clicked Check Box whenever any check box is clicked.
Here is my current code with an On_Click event being used to call the function:
Private Sub chk100_01Y_Click()
' Want to replace this with a dynamic sub that will be invoked
' when any Check Box is clicked and pass the name of that Check
' box to the function
Call Update(ActiveSheet.OLEObjects("chk100_01Y"))
End Sub
I have the following code. I need the textbox values to pass to the cells when the option button (OB) is "moved away from"; that is, when I fill in the boxes while uner OB1, then select OB2, I want the values I put in to pass to the cells. Right now, the values passing to the cells listed under OB 1 are the values that are brought in under the enter event for OB2.
Private Sub OptionButton1_enter()
Me.TextBox1.Value = ActiveCell.Offset(0, 9).Value
Me.TextBox2.Value = ActiveCell.Offset(0, 10).Value
Me.TextBox3.Value = ActiveCell.Offset(0, 11).Value
Me.TextBox4.Value = ActiveCell.Offset(0, 12).Value
Me.TextBox5.Value = ActiveCell.Offset(0, 13).Value
Me.TextBox6.Value = ActiveCell.Offset(0, 14).Value
Me.TextBox7.Value = ActiveCell.Offset(0, 15).Value
Me.TextBox8.Value = ActiveCell.Offset(0, 16).Value
End Sub
I have created a Group Box in Excel with 4 Option Buttons in the group. I have also created a Command Button which currently, when clicked, changes to a worksheet I specified. I am trying to have the Comand Button, when clicked, look at the selected Option Buttons in the Group Box and change to the worksheet specified by the selected Option Button. I have tried an IF..THEN statement with no success. code below that I have tried.
Private Sub CommandButton1_Click()
If AM40 = 1 Then
Sheets("Billboards(1)").Select
'ElseIf AM40 = 2 Then
' Sheets("Live Events Feedback(1)").Select
End If
End Sub
Ihave 2 functions which are called in my main program which should return a value due to what the user selects on a userform using option buttons and check boxes.
Function getnum() As Integer
If userform1.OptionButton1.Value = True Then
getnum = 1
End If
If userform1.OptionButton1.Value = True Then
getnum = 3
End If
If userform1.OptionButton1.Value = True Then
getnum = 5
End If
End Function
Function getlevel() As Double
If userform1.CheckBox1.Value = True Then
getlevel = 1.2
End If.......................................
I have two option buttons on a userform and when the user selects an option button I would like it to stay selected when the userform is called again.
View 2 Replies View RelatedI have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have a user form with a group of several option buttons. When an optionbutton is selected, programatically, I want a worksheet's named column to be parsed through to find unique entries and then have those entries passed to the form's combobox. I've spent the last hour searching for an answer but to no success
View 3 Replies View RelatedThis may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedIf a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View Related