If you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
I have a report that I use everyweek and split up into various sheets according to the criteria.
So if any cell in column C contains "Apple", then I want it copied into a new s/s (with the headers). I basically have to do a number of iterations on this, can someone assist please? The main problem I invisage is asking Excel to copy the row into the new sheet underneath the last one.
Im looking for a formula that will highlight the cell where i can copy it if that cell contains a certain text.
My text will contain "FAS CEH" and I want to be able to copy that row plus all the other rows it copy and move it to a new sheet. Ive read some forum but i cant find a formula that will highlight/copy the entire row.
I would like to create a macro for my boss, their requirement is, in sheet 1 , they have one column, To chase . So when type "y" in any of the cell in a 'To chase' column, then copy the entire row and paste to sheet2.
Also is it possible to do this any selection change event of the cell?
I would like to sort rows from Sheets 2-6 based on the value in Column G into Sheets with the same name. For example, if a cell in column G states "BluePrint", I would like the entire row to be copied into the tab labeled "BluePrint".
however I have been unsuccessful in adapting the coding to my specific wording.
I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
Based on the example and solutions from one of our friends post http://www.excelforum.com/excel-prog...ell-value.html.
i want to know the code with the same data as posted in THAT example,changing the data slightly like adding "TODAY" & "TOMMORROW" as other key words which will be Cut/Copied as seperate groups one beneath the other.
I had attached the worksheet with the actual data & the final Required format.
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range) Dim LC As Integer, iCol As Integer, Found As Range iCol = 14 'column containing K LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column If Target.Column = iCol Then Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I have attached a file showing what I would need the output to look like. I need to know how to search a range of cells (in this case column E) and if the day of the week is Wednesday to copy that entire row to the Worksheet titled Wednesday. I would do it manually but I have several thousand rows of data to get through, and there has to be a better way.
I have a macro that searches in all the excel files contained in a folder (weather files are opened or not) and returns the information (File name, Sheet name , Cell Address, and contents of the cell). I just want to amend the said code so that it copies not just the cell alone but" the entire row in which the cell is present".
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode() ' 'Sheets("Summary"). Select If Range("a7") = "complete" Then ' Sheets(Array("1", "0")).Select Sheets(ArrSh(1)).Activate
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Sub FIND_LOW_PRICE() Range("a1:H6").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, _ Formula1:="=and(a1=min($a1:$H1),not(isblank(a1)))" Selection.FormatConditions(1).Interior.ColorIndex = 6 End Sub
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Sub COPY_BASED_ON_COLOR() Dim RngCol As Range Dim lLoop As Long With Sheets("Sheet1") Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp)) End With For lLoop = RngCol.Rows.Count To 1 Step -1 If Range("B" & lLoop).Interior.ColorIndex = 6 Then Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
Here is the code that I have so far and it works almost the way I want it to. I need to copy over more than just that cell that is being coppied over I need to copy over certain columns in that row.
Private Sub ListBox1_Click() Dim wksData As Worksheet, wksPayment As Worksheet
'payment sheet Set wksPayment = Sheet11 Set wksData = Sheet26 Dim LR As Long LR = wksData.Cells(Rows.count, "A").End(xlUp).Row
Dim varField As Variant varField = wksPayment.OLEObjects("Listbox1").Object.Value Range("F6").Value = varField
