If Not IsEmpty(ActiveCell.Value) And ActiveCell.Value >= 4050 Then
The code in the above if statement is running when I hit a cell with no contents. When there is no such cell, it works fine. I've tried using "" as well but the same thing happens.
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
Can somebody have a look at the workbook that I've attached.
I have set up a timeshhet calculator for work but the thing is, the hourly rates of pay are dependent upon the day of the week the Operative is working, and the time of the day.
We split the shifts AM & PM and the rates are decided as per the worksheet contained within the workbook "Rates".
The problem I am having is how to get the timesheet to understand the days.
For example, if an Op works the Sat night or Sun night, then the rate should reflect x1.5. If it's Sat/Sun daytime, then it's x1.25.
Again, and as per the "Rates" sheet (see top for the rate multiplier) Mon - Fri 09:00 - 17:00 is flat rate/standard hrs. If the work Mon - Fri evenings, then the rate is x1.25.
How can this be done?
Is there a way a string can be evaluated as a formula?
I'm building a formula by concatening several strings but can't find a way to evaluate the formula.
Do I need a macro or is there a simple way to eval it?
My purpose is to compare date fields in two worksheets and have the formula tell me if the dates match. I took care to make sure the dates were true date using =datevalue()
=IF(B2=VLOOKUP(B2,'Raw Data'!$J$2:$K$9748,1,FALSE),"Match","NoMatch")
First, it returns #N/A
Second, I used the formula one column over to evaluate invoice numbers and it worked though in the few that did not match it returned #N/A and not NoMatch.
=IF(C2=VLOOKUP(C2,'Raw Data'!$J$2:$K$9787,1,FALSE),"Match","NoMatch")
I have a formula which works (to the extent that it returns a value), but if I try to use the Evaluate Formula function, it fails at the first step, returning the "=name?" error. The formula does contain a number of named ranges, but these do not appear to affect it's function.
=IF(AND(PBREQ="NO",SEAS_PBREQ="NO",C8="P",F8="DML"),WORKDAY(EXWORKS,(VLOOKUP(E8,DISTINCREMENTTABLE,7,FALSE)*-1),HOLIDAYS),IF(AND(PBREQ="NO",SEAS_PBREQ="NO",C8="P"),WORKDAY(EXWORKS,(VLOOKUP(E8,INFINCREMENTTABLE,7,FALSE)*-1),HOLIDAYS),IF(AND(VLOOKUP(D8,ITEMTABLE,14,FALSE)="Y",C8="P",WORKDAY(H8,VLOOKUP(D8,ITEMTABLE,I8,FALSE),HOLIDAYS)
I am trying to loop through some rows within a worksheet in an effort to make sure the values match a list of values that are defined in an array. However, when I get to the IF statement, I always get a 'Type Mismatch' error.
Dim varRetailers
varRetailers = Array("Depot", "Lowes", "Sears", "TSC", "Walmart", "Z-Other")
For c = rowDataStart To rowDataEnd
If Cells(c, colRetailCat) varRetailers Then '
HI can't seem to get this last scenario laid into this if statement. I am having trouble with the second statement. I need the three cells to equal 100, but only when all three are filled. If only two as in this scenario I would like % Error in cell G2.
Sheet3 *DEFG250%50%*O.K.Spreadsheet FormulasCellFormulaG2=IF(SUM(D2:F2)=0,"",IF(AND(OR(ISBLANK(D2),ISBLANK(E2),ISBLANK(F2)),SUM(D2:F2))=1,"% Error",IF(OR(D2>E2,F2>E2,SUM(D2:F2)1),"% Error",IF(SUM(D2:F2)=1,"O.K.",IF(AND(E2>D2,E2> Excel Jeanie HTML 4
Sheet 1 to look into Sheet 2
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it.
> Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I am working on a customer report template that generates our customers reports and will send them out automatically.
This issue I have now is that the system that generates the raw data for these reports only lists the Customers name in a column with an entry for each line of data, the thing is though that the system has lots of variations of the customers name, even more so if that customers has different departments.
What I need to do is from this list of customer names, I need to automatically figure out what the "common" name is or main name so to speak, and then make a variable using the correct full name, which will be used later on in the code to import correct logos, and direct the reports to the correct people.
Here is a quick example of what data we get raw from the system:
Customer Name:
John Build
Johns Buildings
Johns Ltd Building
Johns Plumbing Department
Glass Doors Ltd A Department of Johns Buildings
Johns Building Corporation
Hole In One Golf Range
This is just an example, we have thousands of clients, so the length, number of words etc can change alot. Ideally I from a list similar to that I would get a full proper result of "Johns Buildings Ltd" for example, this would then be in a variable to be used in code from then on to reference doing certain things with the reports of Johns Buildings Ltd.
You'll notice there is one name "Hole In One Golf Range" that seems to have no relation at all, this is correct, ideally I would also like to build in some error checking into the code, so that rows like that that have nothing to do with the others would get deleted.
So how would you amazing VBA gurus go about working with data like this? I'd prefer a more general answer with explainations that just straight code, as I'm sure I will have to adapt the hell out of it for it to be useful in context.
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View Relatedhow to denote a cell as blank? I'm trying to do an IF formula for if the cell is blank.. Actually it would also work if the formula reads if the cell was NOT blank. Either one would work I just can't figure out the name of an empty cell. So I'm looking for this with the right word in the formula. =if(A1="blankcell",true,false)
View 2 Replies View RelatedI have one tiny qs which I hope someone can answer for me.
I need to allow a user to see a dropdown list (with options) only when the previous cell has the word "complete".
For example, cell B1 can have:
On going
Complete
Blank
If B1 has complete then I want the user to be able to select a number from a drop down list in C1 otherwise I want it to say "wait" or if its Blank to be [Blank].
I tried the Validation > Custom and put in
=IF(B1"Complete","Wait",OptionsList)
Where OptionsList is a defined list of 5->1 but this lot didnt work. I tried similar things in conditional formating but nothing again.
If the result of cell B1 is true then YES if not NO?
I know I can use the formula: =IF(B1="Yes","YES","NO") but I'm looking for the TRUE or FALSE result.
Sheet1
AB110Yes2 3 NO
Spreadsheet FormulasCellFormulaB1=IF(A1>5,"Yes","No")B3=IF(B1=TRUE,"YES","NO")
Excel tables to the web >> Excel Jeanie HTML 4
I have a worksheet with a cell range where the cells can be either logical TRUE or FALSE as a result of recalculations elswhere in the sheet. Only one cell in the range can ever be TRUE at any given time. For much of the time all cells in the range will have the status FALSE Each cell in the range has the same relative logical formula linking to values in other cells in the worksheet I need an event driven macro to find and move to any cell in the defined range if it changes status to TRUE No action is required when the status of the cell changes back to FALSE from TRUE
View 2 Replies View RelatedI have a credit card payment estimation sheet that i am trying to set up a cell that will display the same data as the last cell in columb A that the IF function displays true. I have attached a sample of what i have so far. Would like the data do display in the yellow cell with the red border. File is in Excell 2007 Format.
View 4 Replies View RelatedI'm looking for an IF function formulae.Currently, the IF function of my cell is =IF($A8=B$1,1,0), value if true=1 , if false= 0.
But how do I make the cell A8 ( MRT , Taxi ) show a true value of 1 ?
Becos MRT , Taxi is also under MRT, but I don't know how to make it a true value of 1.
I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:
View 3 Replies View RelatedIf you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
I have some code for another project which was using checkboxes to select elements to copy/paste.
However, I need too many checkboxes and I think it is slowing down the run time.
I'm wondering if it's possible to have a cell act as a true/false checkbox?
Then I would just change my code from
if checkbox1.value = true then...
to
if range("A1").value = true then....
I have been looking through about 4 pages of these threads and searching the internet and can't seem to find my answer.
I am trying to count about 400 cells in column N if a different criteria is true in column M. The numbers in row N are a dollar amount, and the criteria in column M is the type of donor. I need to know how many donors there are of each type. The trick is that there are two other columns with dollar amounts for each donor, and I am also counting based on what event donors made gifts for.
Column M - Donor Type (designed by a letter "E", "A", or "P")
Column N - Annual Appeal (dollar amount by each donor)
Column O - Off-cycle (dollar amount by each donor)
Column P - Event (dollar amount by each donor)
I have a summary chart at the top of all this that should be able to tell me how many donors of type E donated for the Annual Appeal, how many donors of type E donated for the Off-Cycle, and how many donors of type E donated for the Event, etc based on donor type.
I've tried COUNTIF using multiple criteria, SUMPRODUCT, all kinds of things. Usually what happens is a get a #VALUE returned or the function counts the total number of donors by type (ie 269 E donors when what I want to know is how many of those donors donated to the Annual Appeal).
I am trying to make a sheet that I can make selections from a list of things on one worksheet and have the selections pull through to another worksheet. I have attached a mockup of the data, the ideal outcome and the logic is basically this:
If Cell A = Yes, then populate this cell with Column B Data
Repeating until ALL Cell A = Yes have been reviewed
I wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green