I have the following sendmail macro. However I need the "To" section to be the result of a lookup in a worksheet. The specific function that i need it to be is: =VLOOKUP(A837,'Tenacity Jobs'!1:65536,5,FALSE)
How can I incorporate this function so it will insert the result of the lookup into the "To" box ?
The following code (blue font) finds specific worksheets in an active workbook, and copies them into a new workbook then names the new workbook the same name of the worksheet. It all works perfectly.
The second code below (red font) imports some vb into the new workbook. It works fine if I manually open the new workbook and run it in the immediate window. However, I would like to incorporate the red code into the blue code so it all runs as one. I've tried inserting the red line after the "ws.copy after" line and after the ".saveas" line, but no dice.
For Each ws In wb.Worksheets
If UCase(Left(ws.Name, 2)) = "CC" Then
Set NewBook = Workbooks.Add
[Code]...
I'm trying to write a macro that will analyze data from one spreadsheet and do a regression. The information I want to be output on the same sheet. I tried to use the record function, but I got an error. It said "Run-time error '1004': ATPVBAEN.XLA could not be found. The code read:
View 2 Replies View RelatedI have a spreadsheet containing all products in sheet 1. I have a list of promotional codes in sheet 2. In sheet 1 I want to say 'If cell A2 is contained in column B of sheet 2, then say YES, if not then leave blank'.
I've tried the following but it doesn't work:
=IF(VLOOKUP(A6,Sheet2!B:B,1,FALSE),"Yes"," ")
I get #N/A when the item is not in sheet 2 and #VALUE! when it is.
I'm trying to use loop to activate 3 workbooks "OSB1", "OSB2", and "OSB3" and their respective sheets. "OSB1" has sheet "OSB1" in it, workbook "OSB2" has sheet "OSB2" in it etc.
The digit on the end of each OSB is the variable I am using in the loop.
What I am trying to come out with is the following 3 workbooks and sheets being activated:
OSB1.Sheets("OSB1").Activate
OSB2.Sheets("OSB2").Activate
OSB3.Sheets("OSB3").Activate
I've given up the code as I can't work out the inverted commas:
VB:
Dim x As Integer
For x = 1 To 3
OSB" & x & ".Sheets("OSB" & x & "").Activate
Next x
Is it possible to do this at all? The bit after "Sheets" is correct. It's part with the first "x" after the first "OSB" which is incorrect now...
( In my actual code I'm trying to do more than just activate the 3 sheets but need to work out the syntax for this to be able to edit the remainder).
I have the below formula to make a simple calculation:
=SUM(AC1880+AJ1880)
I would like to adapt the formula to ask IF AG1880 is empty or not. If AG1880 is empty then I would like the formula to NOT make the calculation, but instead return "--" (nothing).
If it contains information, then I want the calculation (AC1880+AJ1880) to be made. If AG1880 contains information it will be text in a text format.
I have a number of files organised in a number of folders on Dropbox. I create a macro to enable me to be able to navigate to a particular folder and then get a list of all the files in that folder to be placed within certain cells on the spreadsheet I'm working with in Excel.
View 2 Replies View RelatedI'm trying to create a dynamic Named Range using VLOOKUP in place of a sheet name. (Using Excel 2003 & Win XP Pro SP2).
To illustrate:-
Employees.xls contains employee's details on separate sheets for each department, e.g. Production, Admin, Sales, Personnel, etc. Each sheet is 12 cols. and 1 header row. Sheet 1 of this book contains a 2-column Master List of all employees and their departments. MyBook.xls has an employee's name in A1.
I can get his department by using =VLOOKUP(A1,MasterList,2,FALSE) and what I want to do is incorporate that into the following in place of 'Admin' so that the range will refer to the correct department for whoever's name is in A1.
=OFFSET('[Employees.xls]Admin'!$A$2,0,0,COUNTA('[Employees.xls]Admin'!$A:$A)-1,12).
I am trying out VBA to write a macro in order to average every 25 cells in a column. My attempt so far is
Dim myrow1 As Integer
Dim myrow2 As Integer
myrow1 = 2
myrow2 = 25
Range("G2").Select
ActiveCell.FormulaR1C1 = "=AVERAGE(R " & myrow1 & " C3:R " & myrow2 & " C3)"
myrow1 = myrow1 + 24
myrow2 = myrow2 + 24
So I am hoping the first ActiveCell.FormulaR1C1 gets read as =Average(C2:C25)
However I just get Run-time error '1004' Method 'FormulaR1C1' of object 'Range' failed.
Part of the data I'm collecting from a CSV file is in the form of a hyphenated materials specification. In the current system of manually importing and formatting the tables from the CSV file, the formulas
=If(A10>0,MID(B10,1,SEARCH("-",B10)-1)," ")
=If(A10>0,RIGHT(B10,2)," ")
are used to separate the two components of the specification.
For example, a material specification of 362S162-43 would be separated into
"362S162" under one column and "43" in the next.
The quotation marks are giving me headaches when I try to write the formulas to the appropriate cells using VBA, however. I've got an understanding of what the formulas mean, but I don't know how else to go about splitting the relevant information at the hyphen with another technique.
I have an excel workbook with two worksheets. The first worksheet contains a lot of data with more than 20.000 rows and 20 columns. The important part is that there are two different columns (column F and I) containing codes of items. What I would like the macro to do is the following:
write codes of items in the second worksheet column B under each other. I would like the macro to lookup the codes from this column in the first worksheet (column F and I) and if it finds then display in worksheet 2 column C the column in which found it on worksheet1. So basically I write on worksheet2 column B many many codes and then I press a button to do a search and displays next to the items (in column C) if it found the code in worksheet1 column F, or column I or both, or did not found it.
excel/vba/macro as well
I want to make a macro, which can look up a specific cell value in a column and then replace this value only the first time.
E.G.:
value - 25
desired_value - 31
Peers 30
apples 25
oranges 25
I want it to check the values in the range and change the first 25 to 31.
I need to know how can I code a Lookup formula in a VBA.
In Sheet1 of excel, I have several records of data in column A to E.
I have designed a userform, in which user enters data of column A in a textbox and on click of a button, it writes the textbox value in Sheet2.
I need to code a formula in VBA, so that column B and E of Sheet1 data is written in column B and C respectively of Sheet2 (corresponding data of textbox value).
The Vlookup portion is already working but I need the value located one row below that one.
here is what I have, which return the value itself, I cant seem to incorporate the offset function ion VBA:
Cells(x + 1, y) = Application.WorksheetFunction.VLookup(TempName, Worksheets("Data").Range("F1:F100"), 1, False)
I have the following code that works well with IE but I use chrome almost exclusively. how to tweak this code so that I can pull up a website with my default browser which is chrome instead of IE.
View 2 Replies View RelatedI currently have a spreadsheet using this formula:
=IF(OR($C9-{17}$E9="",ISTEXT(E9)),"",$E9-LOOKUP(9.99e+307,$E1:$38))
It works great (a tip I got from this site Now, I would like to take the LOOKUP portion & use it in a macro.
What I want to accomplish is to have the macro look at the prior month's data, scroll to the last entry in a column then LOOKUP to get the 1st numeric it finds and copy it to another spreadsheet. I need it to bypass any text it finds, and only accept a numeric for calculation.
I need a macro to search for certain info on different sheets
combine them and place it on a Report sheet.
This is extensive and complicated so it would be easier if I
emailed the .xls file
If you think you can help, let me email you the file.
I have a worksheet called "City State Matrix" this contains two columns 1) Location which has the names of cities and 2) State - that has the names of appropriate USA States
I have another worksheet (called Data) and I if I enter the location into Column C of that worksheet I want to auto load the state (based on the data stored in the "City State Matrix" worksheet) into column M (State) of the worksheet called "Data"
I have search and searched the forums, and maybe am not entering the right info to get an answer, BUT I'm trying to do the following and have no idea where to begin... Workbook2: go to Workbook1, lookup c4:n43 and enter the cell value1 (if any) into I4, Workbook2
THEN
In the row the value1 was found, go to column A, retrieve it's value and return it to D4, Workbook2
THEN
Look at row 1 Workbook1, if the column that value1 was found = Jun-Aug then return 01/2008 to B4, Workbook2.
Of course I need this to go down line by line in Workbook2 to fill in all the info.
I used VLookup function in macro. Lookup value is a variable name. I don't know how to use variable name inside of VLOOKUP function.
Use VLOOKUP function in macro with Variable Name for Lookup value
Function CC(CName As String)
ActiveCell.FormulaR1C1 = "=VLOOKUP(cname,'[Structure File.xlsx]Sheet1'!C1:C3,2,FALSE)"
End Function
How to use CName variable inside of Vlookup function.
The following code is something that was developed to find files with certain criteria that matches references in cells A1 & A2. The coding is as follows:
Code:
Option Explicit
Option Compare Text 'for Case-Sensitive matching change Text to Binary
Sub List_Matches()
Dim sPattern As String, sPath As String, sJob As String
Dim sMainDir As String, sCommonSub As String
Dim c As Range, lRow As Long
[Code] .......
The red is the area of the code i am having problems with. The original code was going to look only in one directory, now I wanted to add a second directory with reference located in E5. Now as is the program works fine looking at directory 1 or E4, but the problem i feel is that for E5 all the folder name are named "WO#_____ - ______". I believe the # sign is not allowing it to open that folder and search for the info. In the code there is a function for solving the # sign problem in a file name, but how could i either modify the code or the function to do the same for the folder name and view the # sign as a valid file name to open?
Ceating a macro to perform a look up and return based on column headers.
General Synopsis: Using a call and parameters to choose a lookup column and return column, and their respective sheets. Then the sub routine finding their respective column headers and perform a lookup/return. Essentially the current problem is the macro runs to slowly.
Link to original post: Lookup Macro based on column headers
I want to name three sheets (sheets will have a different name every month so I refer to them below as Sheet(1), Sheet(2), and Sheet(3) (Their sheet index)) using a vlookup in VBA. I want the code to promt the user for input and based on the entry, I want to use a vlookup to name the sheets. There are three "lookup tables" on a sheet named "Ref" that I have defined as Table1 (used for naming Sheet(1)), Table2 (used for naming Sheet(2)), and Table3 (used for naming Sheet(3)) that I want to reference in the code. I also want a code to check the first MyLookUp1 which I have attemped below, but I do not know if I am doing this correctly. Below is my bad VBA attempt so you get an idea of what I am trying to do. Also, attached is an exaple file.
Sub namesheets()
Dim MyEntry As Variant
Dim MyLookUp1 As Variant
Dim MyLookup2 As Variant
Dim MyLookup3 As Variant
Dim MySTRING As String
MyEntry = Application.InputBox( _
Prompt:="Please enter an Item:", _
Title:="Lookup sheet name", _
Type:=2)
MySTRING = MyEntry
MyLookUp1 = Application.VLookup(MySTRING, Table1, 2, False)
If IsError(MyLookUp1) Then Exit Sub
Sheets(1).Select
ActiveSheet.Name = MyLookUp1....................
I have attached a file with an example of what I need. The data tab show the data has been given to me. I need it in a different format to be able to load it into our system. The Needs tab shows what format I need. Basically, I need to convert this table into a flat file, where there is a record for each "X" value only.
View 2 Replies View RelatedI'm running against this problem: a file should be run whenever people want.
however, the last part to complete the file is that the file from yesterday should be opened.
From this file data will be extracted via the VLookup formula...that's the plan.
However, with dim statements it won't work.
for now the code is:
Dim mynum, mysearch, this1, that1, other1
'Open the file from yesterday. Define the date string of this week and last week
mysearch = Left(mynum, 8) & Right(mynum, 2) - 1 'mynum is a date string like 2008-06-26
this1 = "Outstanding invoices " & mynum & ".xls"
that1 = "Outstanding invoices " & mysearch & ".xls"
Set other1 = Workbooks(that1). Sheets("Raw"). Range("comments")
ChDir "Z: FINANCEF&AAPInvoices overdue"
Workbooks.Open Filename:= _
"Z:FINANCEF&AAPInvoices overdue" & that1
the "this1, that1" etc appear when you point with your mouse in the code as correct but
the VLookup function won't work: it takes a long time and when interupted the macro the cells show the VLookup formula with "[that1]" instead of the workbook's name.
I also tried to dim that1 as workbook but that did not help.
I'm working on an Excel based product. As part of the security process I would like to require the user to enter a product id key into excel. Then the spreadsheet would compare the entered value to some kind of online database to verify the id key is valid. Finally, the spreadsheet would update the online database so that the id key is no longer functional. How easy is this to do?
I know verifying that the id key is valid is fairly simple.
Here is my biggest issue: How to get Excel to update the database and of course what form would this database take. Maybe its a table on a webpage, or google docs. Again the issue is how would I be able to update the table.
I have a large database of equipment on one sheet and an input form on another. For inventory control, when a user scans a number into the input form, the main inventory sheet is updated with the current location. I have it working using functions, but I need to do this in VBA. I am looking to do the following;
User enters 2222 on the input form. The code matches 2222 on the inventory sheet, moves the activecell 10 columns and updates a value in that cell. Cell A2343 is "2222" then Cell K2343 is changed to "WAREHOUSE 4". What is the best way to find the match and then select that cell in VBA?
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
i want a macro to search all of column A in multiple sheets for a date that has been put into an input box.
the matching dates have data corresponding to them in that row. i want the date and data from the row to then be copied into a new sheet.
I am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
2WayLookup_Macro.xlsm