Increment Cell Value & Print Sheet At Each Step
Mar 14, 2008
I am trying to automatically increment a cell value then print the sheet. I need it to increment up to 220, or possible higher, and then print at each increment; 1,2,3,etc. as opposed to typing 1 then print, 2 then print, 3 then print...etc. Can this be done with a macro? I've attached a file if you want to view it (cell J2 of "NEW PART ENTRY" sheet).
View 8 Replies
ADVERTISEMENT
Jun 25, 2008
Basically I have a sheet that changes it's values depending on the value in C2. What I'd like to create is a loop that prints the sheet, increases the value of the cell by one, prints the sheet again and so on. Before printing I'd like to check that the value of e.g. B5 is not equal to zero.
View 3 Replies
View Related
Aug 7, 2008
I've created a sheet that I would like to place a check number in say cell C4 and set this number to start at 1001. Now when I select to print 20 pages for example I would like the Cell C4 to equal 1001 for the first page and then page 2 in C4 have the number increase by 1 to 1002 and so on.
If I could figure out away to use the header/footer &[page] command on my worksheet I would be all set but I can't seem to figure how to use that outside of the header/footer.
View 7 Replies
View Related
Sep 24, 2013
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
View 3 Replies
View Related
Oct 28, 2009
I have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1:
Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
View 2 Replies
View Related
Jun 5, 2008
I don't know what exactly is happening, but every step of the macro is happening every 1 second. Literally, the BPM is 60. It will execute a step in the macro every second, when in other macro's i've made, it zips right through as if it was on fast forward.
View 9 Replies
View Related
Apr 27, 2009
My vb code currently creates a new sheet via "Sheets.add". This new sheet has the default name of "sheet1" which I rename as "tempSheet". I then populate tempSheet with data, save as a CVS file and then I remove tempSheet.
If I stay in my workbook and try to execute the code again, the default name of the sheet it now creates is "sheet2" and not "sheet1" - this is a problem becuase my code is trying to rename "sheet1" "tempSheet" and of course it cant.
View 3 Replies
View Related
Jun 13, 2014
Ok so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
View 3 Replies
View Related
Jul 2, 2009
I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
View 5 Replies
View Related
Jan 7, 2010
I'm trying to create a macro that will print the active sheet to PDF, and automatically save it using the contents of cell B3.
Sub SavePDF()
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True, ActivePrinter:="Adobe PDF"
Dim filename As String
filename = Range("b3").Value
End Sub
It seems to do what I want, except name it using the contents of B3. I have very limited VBA knowledge. I've searched for this, and it seems many others are trying to accomplish something similar.
B3 is a formula that will display alpha-numeric characters (such as C0123456). I copied the cell and used paste special>value thinking that may have been preventing it from automatically saving the file as "C0123456", but it still didn't work.
The sheet will always be 2 pages, and I think the code will always ensure Adobe PDF is selected as the printer.
View 9 Replies
View Related
Nov 13, 2013
I am trying to print one of the Sheets in my Workbook by looking at a specific cell that can have one of the sheet names.
View 7 Replies
View Related
Mar 4, 2009
I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
View 14 Replies
View Related
Oct 4, 2006
I currently have a workbook containing 21 sheet, named from Day 1 through to day 21. This limits user to 21 sheets max and makes it untidy if less than the 21 sheets are required.
Had a brainwaave ( slow I know) but thought it would be better to copy and paste sheets as they are required, this I can do. My question is can I automatically through VBA increment the name of the sheet so day 2 is copied and pasted but sheet is named day 3?
View 9 Replies
View Related
Aug 28, 2008
I have a sheet that I want to have a double line border around the outside. Thats easy if there were a set number of rows but in my sheet the number of rows will depend on the size of the rows because of the different amount of information in each cell. So how do I make it print a border around the entire sheet no matter how many rows are in the sheet??
View 9 Replies
View Related
Mar 14, 2013
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example:
I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602
And so on...
Capacitors.JPG
View 6 Replies
View Related
Oct 31, 2008
How do I increment a cell by 1 when data in another cell is changed. In other words...I am logging phone calls made. When I enter the date I made a call I want a cell labeled "times called" to increase by one.
View 9 Replies
View Related
Nov 20, 2011
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
View 1 Replies
View Related
Feb 26, 2014
I have a spreadsheet with 2100 rows. I am trying to fill one column with a numbering system that fills the same number in for 21 cells and then increases by one. For example:
TRIAL WHOSICK?
110TRUE
15FALSE
113FALSE
117FALSE
17FALSE
12FALSE
16FALSE
14TRUE
18FALSE
[code].....
However, I did the first column manually and wish to fill in my "trial" column for all 100 trials.
View 2 Replies
View Related
Sep 29, 2005
How do you get a value within a cell to increment, by say, 1, for each and
every worksheet within my workbook?
For example, the value in sheet1 in cell A1 is 100
in sheet2, I input...= 1 + 'sheet1'!A1 in cell A1 (value now is 101)
then, in sheet 3, I input...= 1 + 'sheet2'!A1 in cell A1 (value now is 102)
then, in sheet 4, I input...= 1 + 'sheet3'!A1 in cell A1 (value now is 103)
etc.,etc.,etc.
How can I input a formula...then copy and paste it into my sheets without
having to go to each and every worksheet to input the formula?
View 9 Replies
View Related
Feb 27, 2012
iam clicking on A6 than that show in that cell 2
if i click on b3 it will show 3 and so on
View 2 Replies
View Related
Apr 24, 2014
I'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
View 9 Replies
View Related
Nov 17, 2006
I currently have a Macro which increments a cell by 1, as follows:
Sub Up_One()
ActiveCell.Value = ActiveCell.Value + 1
End Sub
Sub Down_One()
ActiveCell.Value = ActiveCell.Value - 1
End Sub
How do I amend this so the selected cell 'goes to' cell A4 before carrying out the macro above?
My employees keep forgetting to click in cell A4, and the macro will simply increment whatever cell you're in at the time of click...
View 4 Replies
View Related
Nov 24, 2006
Im trying to write a very basic macro that will let me increment a cell value from 0 to 20. in this instance im trying to make cell a40 change from 0 to 20 and im trying to make it increment by 1 every time and then go back down from 20 to 0. In this code i need to be able to see the changes happening as i will be showing the incrementation on a graph.
View 2 Replies
View Related
Dec 15, 2006
I am working on a Loop, I have most of it working except incrementing the cell.
I have this,
PartN = Worksheets("Parts").Range("A3").Value
then the loop. what I can't figure out is I need for A3 to increment by one row until the loop is done. i.e. loop runs as A3, then A4, then A5 etc.. until the specified number of the loop is reached (which is basically the number of rows I have)
I tired something like
Dim CellN As Variable
CellN = "A3"
Do Until xxx
PartN = Worksheets("Parts").Range(CellN).Value
then before the Loop statement at the bottom I put
CellN = CellN + 1
but I get a type mismatch error
View 3 Replies
View Related
Sep 11, 2007
I am experimenting one way to solve one problem, but to do this I have to Name some cells with some values, thing that normaly in VBA is symple but I have never done before in coding. May be my problem is because what I am doing is not valid with the vlookup but if you can take a look to my file. The problem is that when I run the Macros the Named Cells are totaly out of place...
Sub Lookup()
dercell_unit = Range("C65500").End(xlUp).Row
Range("B" & dercell_unit, "E2").Select
Set Rango = Range("B" & dercell_unit, "E2")
For i = 2 To dercell_unit
Names.Add "VALrsa", "=$C" & i
Names.Add "RESOLdds", "=$D" & i
Cells(i, 7) = Application.VLookup(Cells(i, 2), Rango, 4, False)
Next i
End Sub
View 3 Replies
View Related
Sep 26, 2007
I have figured out how to get the average. My next problem is getting the dates to increment. I want the time and date to go as follows: 07/12/07/9:00 then 07/12/07/10:00 ...... 07/12/07/23:00, 07/13/07/0:00 like this.
View 7 Replies
View Related
May 2, 2008
I need to add or subtract a specific amount daily from a sheet with little or no manual intervention.
View 9 Replies
View Related
Jan 24, 2009
I have a worksheet (Sheet1) with column A labeled MissionNumber. I have also created a Form which I can use to enter the next mission number into that column. However, instead of manually entering the number...when opening the form I would like it to check column A for the last entry...and automatically increment the mission number by 1 and have it displayed on the form.
View 10 Replies
View Related
Oct 18, 2006
I have a single cell in a spreadsheet which I'm trying to increment by 1 on demand.
My ideal would be a button which increments by 1, and another button which decreases the value by 1.
Is there any simple way to do this?
View 4 Replies
View Related
May 21, 2009
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1),
H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written.
Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code),
Im seeking the quickest and easiest way of implementing this since the database is very large.
View 2 Replies
View Related