I've created a sheet that I would like to place a check number in say cell C4 and set this number to start at 1001. Now when I select to print 20 pages for example I would like the Cell C4 to equal 1001 for the first page and then page 2 in C4 have the number increase by 1 to 1002 and so on.
If I could figure out away to use the header/footer &[page] command on my worksheet I would be all set but I can't seem to figure how to use that outside of the header/footer.
Basically I have a sheet that changes it's values depending on the value in C2. What I'd like to create is a loop that prints the sheet, increases the value of the cell by one, prints the sheet again and so on. Before printing I'd like to check that the value of e.g. B5 is not equal to zero.
I am trying to automatically increment a cell value then print the sheet. I need it to increment up to 220, or possible higher, and then print at each increment; 1,2,3,etc. as opposed to typing 1 then print, 2 then print, 3 then print...etc. Can this be done with a macro? I've attached a file if you want to view it (cell J2 of "NEW PART ENTRY" sheet).
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB: Sub Print_All_Worksheets_With_Value_In_A1() Dim Sh As Worksheet Dim Arr() As String Dim N As Integer
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example: I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602 And so on...
How do I increment a cell by 1 when data in another cell is changed. In other words...I am logging phone calls made. When I enter the date I made a call I want a cell labeled "times called" to increase by one.
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1); Number of purchases = 1 Customer Type = Single Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2 Customer Type = Multiple (can be achieved by using IF statement on No. of purchases) Discount = No
I have a spreadsheet with 2100 rows. I am trying to fill one column with a numbering system that fills the same number in for 21 cells and then increases by one. For example:
I'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
Im trying to write a very basic macro that will let me increment a cell value from 0 to 20. in this instance im trying to make cell a40 change from 0 to 20 and im trying to make it increment by 1 every time and then go back down from 20 to 0. In this code i need to be able to see the changes happening as i will be showing the incrementation on a graph.
I am working on a Loop, I have most of it working except incrementing the cell.
I have this,
PartN = Worksheets("Parts").Range("A3").Value
then the loop. what I can't figure out is I need for A3 to increment by one row until the loop is done. i.e. loop runs as A3, then A4, then A5 etc.. until the specified number of the loop is reached (which is basically the number of rows I have)
I tired something like
Dim CellN As Variable CellN = "A3" Do Until xxx PartN = Worksheets("Parts").Range(CellN).Value
then before the Loop statement at the bottom I put
I am experimenting one way to solve one problem, but to do this I have to Name some cells with some values, thing that normaly in VBA is symple but I have never done before in coding. May be my problem is because what I am doing is not valid with the vlookup but if you can take a look to my file. The problem is that when I run the Macros the Named Cells are totaly out of place...
Sub Lookup() dercell_unit = Range("C65500").End(xlUp).Row Range("B" & dercell_unit, "E2").Select Set Rango = Range("B" & dercell_unit, "E2") For i = 2 To dercell_unit Names.Add "VALrsa", "=$C" & i Names.Add "RESOLdds", "=$D" & i Cells(i, 7) = Application.VLookup(Cells(i, 2), Rango, 4, False) Next i End Sub
I have figured out how to get the average. My next problem is getting the dates to increment. I want the time and date to go as follows: 07/12/07/9:00 then 07/12/07/10:00 ...... 07/12/07/23:00, 07/13/07/0:00 like this.
I have a worksheet (Sheet1) with column A labeled MissionNumber. I have also created a Form which I can use to enter the next mission number into that column. However, instead of manually entering the number...when opening the form I would like it to check column A for the last entry...and automatically increment the mission number by 1 and have it displayed on the form.
We need to reach a cell value by using increment of another cell value. But ideally the results will all be in one cell.
Now to make it a little more advance there could be an overhang of the board in A3 which would need to be deducted from the first increment.
Example :
A1 = 5193mm (Lenght of beam) A2 = 600mm (Width of board) A3 = 200 (Overhang) A4 = 400 - 1200 - 1800 - 2200 - 2800 - 3400 - 4000 - 4600 (End Result, The formula wont do the next sum as it exceeds A1)
Of course the vaules of A1 and A2 will vary but that shouldnt make any difference to the formula.
Line (A1) asdfasdf Line (A2) adsfadsf Line (A3) asdfasdf
What I would like to be able to do is highlight the three columns and fill down, but I would like for it to increment and paste the next three lines filled like this:
Line (A2) asdfasdf Line (A3) adsfadsf Line (A4) asdfasdf
Then below that the next three lines filled like this:
Line (A3) asdfasdf Line (A4) adsfadsf Line (A5) asdfasdf
The (A1, A2, etc.) are cell ranges and already contain the concatenate function that pulls data from a different location. The problem I am having is when I
highlight and fill down, it doesn't increment the cell by +1 (Ex. A1 beomes A2) but instead by +3 (A1 becomes A4) the number of lines highlighted.
i have excel sheet with name labels.i want count how many times user repated along with his branch code. acctully am done this using this formula, but not getting what am exepected.
Formula in B1 is ="JSK-SW-1"&(countif($A$2:$A2,$A2)) output is value is incremented, but i want text also be change. A B Name Count Sateesh JSK-SW-1 Rajesh Raj- SE-1 Sateesh JSK-SW-2 Rajesh Raj-SE-2 Anil JAK-DE-1
I am trying to get my invoice sheet to automatically increment the invoice number when I open the workbook. I know it is in the code i.e. private sub? but it doesnt seem to work.
I've got a worksheet here that i need to update every week. The problem i'm having is that i have a table of values that's drawing values in from another larger table. For example in B9 the cell is referenceing the I2 cell in another sheet. When i pull down the formula in B9 i want the cell below to reference J2 and so on. In other words, I only want the alpha characters to increment. Tried messing around with dollar signs but it doesn't seem to be doing what i want.
What I'm trying to do is from a template worksheet that I have in a workbook with other worksheets, I'm trying to come up with code that will create a new worksheet based on the template (copy), increment the invoice number, and rename the worksheet tab to be "Invoice # xxxx" (new invoice number from prev. step.).
I have figured out how to use a button on the template to execute, but as I said my VBA skills are lacking to say the least.
I have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1: Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
I'm quite a novice at Excel. I have a column of values that I sum as follows;
A 0 0 0 0 0
0 <----------------sum of A1:A5
A formula may change one of the values in the above column to a '1' which means the sum will become '1'. The sum can only be '1' or '0' and only one value in the column will ever change. I need to add a value of 2 to another cell (say, C1) when the sum of A1:A5 changes from a value of '0' to '1'. I know this will probably involve the worksheet change event but am having a problem implementing it.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
