I am having trouble with the following situation:
on the sheet PANEL in cell A2 I want to reference the information on sheet 480 in cell B5.
Then on sheet PANEL in cell A3 I want to reference the information on sheet 480 in cell B54.
'PANEL'A2 needs to equal '480'B5
'PANEL'A3 needs to equal '480'B54
And so on...
I need the reference to skip 49 cells each time so that I can just copy the formula on down the column.
Very simply put, let's say there are examples numbers 1,2,3,4 put in cells A1 to A4 (vertical) and more example numbers 50,60,70,80 are put in cells A6 to D6 (horizontal)
What one formula can be written in B1 that I can copy down to B4 that will make B1=A1+A6, and B2=A2+B6, and B3=A3+C6, and B4=A4+D6
I'm putting together a document where I'm trying to automatically create a reference number for each entry. The reference number needs to consist of a site ID (found in column A), an underscore, and then an incrementing number dependent on how many entries the reference number appears.
For example, in column A, the first time the site ID: 12345 appears, I'd like the reference number 12345_01 to be created. The second time it appears, the reference number would be 12345_02. And so on.
If possible, as illustrated above, the first nine references need to have a 0 before the number - i.e. 01, 02, 03, etc - when it hits the tenth instance the reference becomes 10, 11, 12, etc.
I've tried to solve this with COUNTIF, but cannot get it down.
Is there a way to count how many times a value is changed?
Cell A1 can be either “YES” or “NO”. Its' value is controlled by validation…
When Cell A1 is changed from “YES” to “NO” I want to increment the value in B1 by one.
When Cell A1 is changed from “NO” to “YES” I want to leave B1 as it is.
Here is what I have at present:
At the beginning of a loop, my cursor is positioned on a row. I want to test two cells on that row.
Depending upon the result of the two cells, I want to make the row a certain color.
After that, I then want to move down to the next row, test the same two cells in THAT row, color accordingly and loop again until I reach the bottom of the spreadsheet.
My problem is this:
If I can use a loop that lists various conditions, along with the corresponding statements that color the row accordingly, how can I when finished increment the cell references so that the conditions change to refer to the cells the next row down?
If a loop is not possible, any suggestions you have for solving this problem would be appreciated. I have about 200 rows so am trying to condense my code; this may be hampering my ability to figure out the solution.
can i make a cell dark green if it is value 1 and very light green if its 10 and all varying shades of green in a linear fashion in between?
View 9 Replies View RelatedI have a sheet where users enter a date and other details on each row.
The number of rows where data is entered can be upto 20 at any one time.
I wish to allow users to drag the cell date down for the number of rows they wish, without the date incrementing.
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedIm trying to create a catalogue for our complaints that come in each day at work. Ive created a basic layout I like, it uses 3 cells for a week day and 1 cell for a weekend day. The date is listed on the side of each day. I would now like to be able to quickly use this format for the rest of the month/year but need a way to do this easily as I cant do each day separately in the future. Ive tried selecting cells and then dragging down but all it does is repeat the previous 7 days and the same dates instead of incrementing the date.
Ive attached an image ...
Im using the following HLOOKUP formula : =HLOOKUP($B$14,$DA$15:$EH$380,2,FALSE) and I need to drag it down 365 times, but the row index num, ie ‘2’ does not increment with the drag. Is this correct – or is there a way of making the 2 increment?
View 3 Replies View RelatedIf I'm in a worksheet and I spot a row I'd like to copy into my second worksheet, how do I arrange to have it increment the rows?
EX: searching through a worksheet, I see a suspicious entry. I want to copy it into another worksheet. I use the macro. I go back to the original worksheet and see another suspicious entry that I'd like to copy. I'd need a macro that would copy the active row from sheet one, and increment the rows on sheet two before pasting.
I create inventory cards and each needs a unique 4 character sequence number. Currently I have it set up with 4 cards per sheet. If I need to print more than 4 cards, the worksheet will print one sheet of 4, reset itself and increment the sequence number by 4 and continue this cycle until I've printed the number I need.
Currently I have it only using numbers. I start at 1000 and it increments, by 4, up to 9995. Once it reaches 9995 or higher, the increment resets to 1000 and starts over. The problem I am facing is I am now starting to get several cards that have the same "unique" sequence number. What I would like to do is change it from numerical sequencing to alphanumeric sequencing.
This is the code I currently use for the incrementing....
In one of my rows I am a referencing another sheet:
The formula is =Sheet2!e4. In the row below it I have =Sheet2!E8. Now is there a way to drag these formulas down so they keep incrementing by 4?
I've got above basic VBA knowledge and learning very quickly (largely due to great forums like this) I'm now creating a userform for the first time. I'm trying to create a New Supplier form and one of the fields is going to be for Supplier ID where it takes the first 6 letters of the Supplier name (entered by the user) & tags on '001' at the end. I've managed to do this but I would like some code to search existing supplier ID's ( Column A on separate sheet) and check whether the ID created already exists and if it does add on '002' instead of '001'.
SO for example..
If user creates a supplier called Microsoft the supplier ID will be Micros001 - this I can do, but if Micros001 already exists then it will generate an ID
Micros002, Micros003 and so on...
I have a column that I want to insert number 1 through ? incrementing by one. Can I do this simply without having to type in each one manually?
View 4 Replies View RelatedI have created below vba code but don't understand how to stop the auto incrementing.
[Code] ......
It end ups giving me see below.
Week 5+6
Week 5+7
Week 5+8
Week 5+9
Week 5+10
Week 5+11
And what I want is that it shows in all the lines “week 5+6”
Strange enough when I only enter a number like 5 it doesn’t auto increment.
And if I add a dot behind the 6 then either.
But I just want it AutoFill that what I have inserted in the box!
I have a piece of code that runs through multiple tables (they vary in length) and replacing values. All in the same worksheet
My code looks like this:
[Code] .....
How I get c to move to the next table and count the rows in that. In my code c stays constant, and I need it to change and match the new row count.
I have a spreadsheet which I need to remove all the blanks from, but instead of shifting cells up (I figured out how to do that in a macro), I want them to shift left.
I understand the basics of for...next loops etc, but I can't seem to understand how to make the selection in a range string variable. Not sure if this is a good explanation!
The code I have so far is....
I am running a macro where I pass it starting column and it processes the next 10 columns. How can I pass it "J" and have it increment K,L,M,N,O,P,...?
View 3 Replies View RelatedI need to complete what would seem a fairly simple incrementing task but I'm not getting the results that I'm looking for. I don't know much about macros so would prefer not having to use one but I'm willing to try if it's not too complicated.
I'm using Excel 2010 on a PC. For several projects, I need to increment cells that contain text and numbers. The column contains data in a cell (A1), followed by a blank cell (A2), then cell A3 contains new data followed by a blank in A4, etc. What I need to do is 1) copy the exact data in A1 to A2 and then 2) increment the number used in A1/A2 by 1 in A3, copy that into A4, and the pattern repeats down the column.
Here is an example of what I have in column A:
Test_01
[blank cell]
Test_02
[blank cell]
Test_03
[blank cell]
etc.
This is what I want as a result.
Test_01
Test_01
Test_02
Test_02
Test_03
Test_03
etc.
Do I need to save the data in the column as text, general, or numbers? Is there some function that would make incrementing the data possible as I've outlined above?
Incrementing line numbers is a simple task.
If line Identification starts with
AA
AB
AC, why doesn't the same rules apply?
Highlight the cells then click and drag the corner down.
I am currently working on a button which does the following:
User wants to create a new sheet
Clicks button
Input box prompts user to enter sheet name
User enters the sheet name
The sheet is created and copies over formats and values from another sheet
I then want the user to also enter a date.
The date must then be places (always in "C2") then each second column after that the date entered + one day.
E.g. C2 = 01/08/2008 then C4 will have 02/08/2008
I want this entered for the whole month.
The code is below:
Sub copyformula()
Dim vsheet As String
Dim vdate As Date
vsheet = InputBox("Enter a sheet name:")
I have a sheet with all of my data sorted into columns. I am writing a macro to select and copy the value from column A if there is any value in column B on the same row. The output would be sent across consecutive columns.
As an example;if B3 is not blank, copy A3 to I5
if B4 is blank, do nothing
if B5 is not blank, copy A5 to J5
if B6 is not blank, copy A6 to K5
and so on.
I cannot figure out how to increase the output column identifier. Everything else I can get
I have the following function that looks at a range of data and deletes duplicate entries in each column. I want to change the range that is examined programmatically, rather than having to retype it for each range in this huge sheet! I have subtotaled and counted the rows in each range, so I know how many there are, but I'm stumped as to how to increment teh range correctly. I'm attaching a small sample of my data. The full sheet is 30,000+ rows and 94 columns.
Sub DelDups2()
Dim rngSrc As Range
Dim NumRows As Integer
Dim NumCols As Integer
Dim ThisRow As Integer
Dim ThatRow As Integer
Dim ThisCol As Integer
Dim J As Integer, K As Integer, x As Integer
Set rngSrc = ActiveSheet.Range("c68", "cr70")
NumCols = 94
NumRows = rngSrc.Rows.Count
ThisRow = rngSrc.Row
ThatRow = ThisRow + NumRows - 1
ThisCol = rngSrc.Column
For x = 1 To NumCols
For J = ThisRow To (ThatRow - 1)
If Cells(J, ThisCol) > "" Then................
I have a formula that i'd like to "click and drag" down but while i do i want it to increment through columns
a
b
c
[Code]....
in cell A1 i'd have the formula
VB: =max(c1:c5)
and it will spit out 15, that's great but when i drag the formula down i want cell A2 to give the value 20
i'd like
VB: =max(c1:c5)
to somehow turn into an equivalent
VB: =max(g1:g5)
by only dragging down, not to the side
I have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.