Address(5,$Z$5+60) appears to refer to the cell I want; however, I'm trying to use the Address function inside a Rank function and have tried it with and without the Indirect function (as shown below) and it doesn't work --
=Rank($BE$5,Indirect(Address(5,$Z$5+60)):Indirect(Address(1000,$Z$5+60)))
The range always comes back as 0.
I am trying to do season stats for my roller derby league. I have a great spreadsheet going but the one thing I want to do, I can't seem to do. I am attaching a "test" file. very simple and small but shows what I need to do.
I have different sections and I am trying to pull the highest number out of that section. For this example, it is under the green Jams Skated: Jams at Jammer. The number on the right is the highest number of jams skated while the number on the left should be the name of the skater who has this number. Okay, no problems there. My problem occurs when I try to move these same formulas to another sheet. in this case, sheet 2. It pulls all kinds of strange things.
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
determining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedI am using these formula
=SUM('18'!N:N)
=COUNT('18'!A:A)
I need to enter the sheet name in cell A1 instead of the sheet number 18 in the formula using INDIRECT for both the formulas.
I have the following formula:
= SUM ('03:08'!D4, '03:08'!E4)
the 01, 02 ... 020 are the names of the sheets. How can I modify the formula so that I can use other sheet names. Name sheets whose cells I want to be myself in C4 and D4. I tried INDIRECT but I don't know for several sheets.
I am using the below formula to return values from a seperate worksheet.
=INDIRECT("'[Test File.xls]Test Data'!A"&A4)
These values are text, numerical and dates. Sometimes there are no dates in the source worksheet to return, and I end up with 00/01/1900.
Is it possible to leave the cell blank if there is no value to return???
I had a stab at trying to nut it out, but it was a Friday afternoon, head was mush, and the pub was calling.
How could I create a formula that would look up based on month, category, and most importantly an indirect? I have attached a spreadsheet, the indirect is in K13 (and could be Quarter 1, Quarter 2, Quarter 3, Quarter 4) with matching data in "Sheet 2".
View 3 Replies View RelatedI have used the function INDIRECT in 1 of my files.
The disadvantage is that both files (source and target) have to be open.
Is there a substitute for INDIRECT that works with a closed source file?
I am trying to sum through multiple worksheets but maintain flexibility using INDIRECT but it is not working!
I have a worksheet for each month of the year Jan - Dec with a financial result. In order to get a Year To Date figure I would have a formula such as:
=sum(Jan:Jul!B3) for a July YTD.
However, I want to maintain flexibility such that I can enter the worksheet name in cell A1, e.g. Sep and then have a formula such as:
=sum(INDIRECT("Jan:"&A1&"!B3"))
Thus allowing me to generate the correct YTD at any point. All I get is a #REF error.
The following formula sorts for specifics in the sheet named 200910 in the specified ranges in columns A and D to return a total found in column AB. This works just fine.
=SUMPRODUCT(('200910'!$A$2:$A$1777="Countrywide")*('200910'!$D$2:$D$1777="Claims-All Products"),('200910'!AB2:AB1777))
What I am looking to do, instead of telling excel what sheet to go to, is insert this: =INDIRECT(TEXT(Y10,"yyymm")&"!ab1749") to find the matching sheet name to the date that resides in cell Y10.
These both work separately on their own to return the needed value. How do I put them into one formula without telling excel what sheet to go to (1st formula) and specifically what cell to go to (2nd formula) because the cell location may change and I want to completely automate this?
I am having some trouble with a handy formula I learned over this forum and its application between two tabs.
Referencing the attached workbook, the formulas in cell C6 & C7 are working for the end range I want, but the first section doesn't want to work. I'm not sure if it has something to do with the quotes (") or not.
For example
=SUM(INDIRECT(C10))
where C10 would contain
="Sheet2:"&"Sheet3!"&"A"&ROW()
always returns #REF!.
However, ="Sheet3!"&"A"&ROW() as the Cell C10 entry will work fine.
=SUMPRODUCT(--(A2:A1000=B1))
Column A has got random numbers, my formula attemts to capture the count of numbers as specified in B1, is there a way I can nest an indired t formula to mention in cell C1 ( > or < ) so it can look for numbers greater than the number in B1 or lesser as indicated
=INDIRECT("'" & A2 & "'!" & B2)
I am trying to use this formula to get to total of each month depending on A2. Cell A2 will have drop down of months names, that is Tabs names. I want B2 to have total of each month rather than cell reference, because Total may not be always in the same cell, we add rows if we add new account number or cost center.
So, Can I use name function instead of cell reference, for example April-total, May-total, June-total etc.
I have several cells with defined names throughout a workbook which I need to be able to sum. The defined names all have the same naming convention (i.e. Assets575Total, Assets349Total, Assets286Total) where the numeric is an account #.
I have tried the follwing formulas below using Indirect, however, none seem to work:
{=SUM(INDIRECT("Assets*"&"*Total"))}
{=SUM(INDIRECT("Assets"&%&"Total"))}
{=SUM(INDIRECT("Assets"&"*"&"Total"))}
{=SUM(INDIRECT("Assets"&*&"Total"))}
{=SUM(INDIRECT("Assets"&%&"Total"))}
I have 40 sheets with info and 2 summary sheets. One summary sheet will summarise the data on sheets 1 to 20 and the other 21 to 40.
Im using the following:
=INDIRECT(ROW()-9&"!X10")
This works fine for my 1st summary sheet enabling me to display the vlaue of X10 in sheets 1 to 20 in D10:D29.
However in the 2nd summary sheet I wish to display X10 in D10:D29 but only using sheets 21 to 40.
Is there a way to eliminate sheets 1 to 20 and just use 21 to 40.
I just need to find the MIN of P6 to Px. Where x is a number that is from another sheet. (Lets say B3)
I thought this would be it, but its still not working, gives me #REF! error
=MIN(INDIRECT("P6:"& '[filename.xls]Sheet 1'!$B$3))
I have a sheet with tabs Jan - Dec
My goal is for a user to specify a 3 letter Month in Cell A1 (i.e. Jun) and for my sheet to calculate all cells C5 from Jan - Jun.
I have tried using the following formula =SUM(INDIRECT("Jan:"&A1&"!C5")), but the indirect function does not seem to span across workbooks!
I am trying to figure out a solution and wondering what would work the best. Here is my situation. As an example, I have one big database with fields such as:
Item# Date Qty Price Cost ect...
1 3/4/08 3 $9.00 $7.00
2 9/5/08 5 $8.00 $6.00 ect....
This continues for up to 1000 lines from a database. I have this is a tab called "Database". From the data in the tab "Database", I want to be able to create 4 seperate reports.
The first report might only have the columns "Item #" and "Date".
The second report might only have the columns "Item #" and "Qty".
The 3rd with only "Item #" and "Price"
The 4th with only "Item #" and "Cost"
If I create a new spreadsheet called "Sales" and create the following:
ColA = Item #
ColB = Date
2 questions:
1. How can i put an Indirect function nested with concatenate?
=CONCATENATE(A8,B8,C8,D8,E8,F8,G8,H8,I8,J8,K8,L8,M8)
2. How can i get the formula to adjust to new data range without manually filling down. Assume the formula starts CELL Q8
I need to have a cell count the number of cells that contain a certain text found in cell $b3. (the 3 is relative the B is not).
The data will be found on multiple sheets called "Game x" where X is an integer. (Game 1, Game 2, etc...) the cells are between $b$65 and $b$73.
i tried =COUNTIF(INDIRECT("'Game " & 1:$A$1 & "'!$b65:$b73"),$B3)
but it did not work.
also after i get that working I need to do the same thing, but i need to count the number of times the Name in $b3 appears in the List with the word "Win" in the "D" column (next to the $b65:b$73)
Again i tried =COUNTIF(AND(INDIRECT("'Game " & 1:$A$1 & "'!$b65:$b73"),$B3),(INDIRECT("'Game " & 1:$A$1 & "'!$b65:$D73"),"Win"))
why Microsoft have not made the indirect function non-volatile. In 1997, they changed the index function to non-volatile.
View 9 Replies View RelatedI have multiple sheets as Name1 ; Name2 ; Name3 and each sheet have a value on cell A1 for any number let say between 0 to 100. On another sheet call SheetName, I have A1=Name1 ; A2=Name2 ; A3=Name3.
I have formula as:
[Code] .....
The INDIRECT formula work to refer each cell A1 in each sheet, however if the sheet name include a space then it won't work anymore. How to make it work with the sheet name with space?
I totally understand how to make the combobox under form controls now but I am not having any success with the indirect function I was using as a list now that I have a combo box. I have attached the current form I am working on that just shows the list function still. How to convert this over to combo boxes with the indirect function?
I attached a second form with the feature I am asking about. It is just lacking the third list that I now have in place. (on the 1st attachment).
Attached Files
File Type: Corp MASTER (3).xlsx
File Type: Quote form (2).xlsx
