Develop An Indirect Indirect Validation Drop Down List
Aug 18, 2009
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
View 3 Replies
ADVERTISEMENT
Mar 28, 2014
I am using a data-validation-list with =INDIRECT(B7) as the source. It works as expected except for after the file has been closed and reopened. When it is reopened, the source is changed to =INDIRECT(#REF!).
I have tried =INDIRECT('Worksheetname'!B7) but same result.
View 9 Replies
View Related
Sep 18, 2006
I have a dynamic validation list (see attached) which will not accept the indirect function as a formula in the listbox.
Using the named range on its own works fine, but using the indirect generates an error.
View 3 Replies
View Related
Dec 31, 2008
troubleshooting dependent validation list formula. I found the Ozgrid instructions for the Dependent Validation Lists to be verfy informative and I downloaded the "MatchingLists.xls" to use as a starting point.
My challenge is this: The MatchingLists.xls example does not take into account that there may be MULTIPLE dependent lists that have spaces, numbers and other unique characters in the list's source celles. Therefore, I have decided to reference a NameLookup (named range) that has an abbrevieated name for each each item (without numbers & spaces) I am nesting VLOOKUP within the INDIRECT formula to achieve the results I need - but for some reason it fails occasionally and I do not know how to troubleshoot!
Data Validation Source =INDIRECT(VLOOKUP(SUBSTITUTE(E5," ","_"),NameLookup,2,0))
Excel's Data Validation simply returns the message "The source currently evaluates to an error". This is frustrating becuase it is not consistent. It works with some lists and not with others. How do I troubleshoot???
My worksheet is attached for your reference. The source data for the dependent lists is on the Lists sheet. The dependent drop-downs are in columns E-H on the drop-down sheet. The formula that I am having trouble with is in "Subcategory" (column F). For some reason, I cannot choose category "26_Heat_Exchangers" to populate the subcategories. There are a few other categories that this formula breaks on and I don't know why. Please tell me this is not some crazy limitation with Named Ranges.
View 3 Replies
View Related
Feb 7, 2014
I have a data validation list where more than one value should show the same list. Instead of make multiple range, I want to make it so if any of the values are in a cell the data validation list will show the list that goes with those values.
View 4 Replies
View Related
Feb 11, 2014
I've attached a sample file of what I am trying to do.
In row 2 I have data validation in the form of lists. Below row 2 is the data.
Cell B2 has an indirect expression referring to cell A2. In other words, B2 is dependent on A2 (cascading)
What I would like to happen is when a new selection is made in cell A2, B2 populates with "Choose platform", instead of keeping the old information. The drop down populates with the new data but cell B2 still displays the old data.
Book2.xlsx
View 1 Replies
View Related
Aug 13, 2014
I am trying to arrange a dependent drop-down list and have the basic listing working. My problem however is that when i pull data from sheet "Mon" for column C using indirect it works but when I try to do the same thing for column D i get the same data as column C. How do i get indirect (or offset if it works better) to allow me to reference the alternate data 1 column over?
View 3 Replies
View Related
Jan 16, 2014
I have a competition entry form for an association I belong to that I'd like to add two drop down menus to so that entrants can select their club name and associated team names for that club.
In a worksheet behind the form I have a list of clubs in column "B" ("A" has the ID number in it as the table is from Access - don't ask!!) and the names of teams associated with that club going across the sheet beside the club name in individual Name Ranges. (Up to 30 Team names in Dynamic lists
=OFFSET(TeamsTest!$C$2,0,0,COUNTA(TeamsTest!$C$3+TeamsTest!$C$3:$AZ$3),1) )
On the form I have managed to make the first drop down so the club can select its name from a list by using Data Validation and referring to the Range Name (ClubLink - =OFFSET(TeamsTest!$B$2,0,0,COUNTA(TeamsTest!$B$2:$B$200),1)).
I have tried using an INDIRECT command to create a second drop down which will display only the team names associated with the Club selected in the first drop down, but can't get it to do anything - no drop down appears when you click on the drop down arrow at the side of the cell
The data Validation for the Team Name drop down is =INDIRECT(SUBSTITUTE($C$12," ","")) where C12 is the Club Name cell.
Why I can't get the Team Name cell to show the names listed beside the Club selected in C12?
View 14 Replies
View Related
Jun 9, 2009
i know it is possible for a selection in a drop down box to determine another field using the INDIRECT function in validation
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
2nd drop down box (if chosen rugby) - displays list of rugbyteams
2nd drop down box (if chosen cricket) - displays list of cricket teams
but is it possible for the 1st drop down box to determine what is available in a range of other drop downs?
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
3rd drop down box (if chosen Man Utd) - displays list of Man Utd players
View 7 Replies
View Related
Jun 28, 2013
I have a worksheet that uses the INDIRECT function as part of cell validation to generate a custom 'name' range, this name then references a bunch of sheets that contain the actual range where the values for the validation list are stored. For example: ValidationExample.xlsx
Name = Color
Values = Blue, Red, Green
Name = Shape
Values = Square, Circle, Triangle
So what this allows me to do is in the first cell, I can define two options such as Color and Shape. Once one of these is selected, the next cell will have a formula for the validation as "=INDIRECT(A1)" then I will define two named ranges called 'Color' and 'Shape'. This will then show me the list of items in the cell based on previous selection. An example of this is attached to this posting above.
When the formula is written into the validation, an error message is generated saying that the formula will generate an error. Even with this message, the method works effectively to provide a blank list if nothing in the first cell is selected, or a list dependent on the selection of the first cell.
In this case, what I want to do is generate a macro that will populate the validation for a cell when new records are added. This won't always copy down from previous cells because the way I add records is through use of a macro and I generally find using the format painter in vba to be a fairly sloppy way of getting formats from other cells. So I go through a series of validation additions to each cell in the worksheet to get this validation created (I have no written this into the workbook attached).
VB:
Dim i As Long
Dim lastRow As Long
Dim sht As worksheet
[Code] .....
As I read in previous posts, Formula1 cannot contain an actual formula, only names and lists of items. Since each of the cells will have a changing reference, thus the INDIRECT function would need to change to reflect this, The 'Secondary' name consists of the following:
"=INDIRECT(OFFSET(INDIRECT(ADDRESS(ROW(), COLUMN()), 0,-1)))"
Which of course does not work due to the error when using INDIRECT in the first place (though the Address() function appropriately finds the cell with the validation in it's appropriate address). I can think of other ways to do this, such as having validation lists change in with VBA on a SelectionChange or Change event, but that's a lot of code that is subject to change when the named ranges have changes to them (which is fairly frequent). Is there any way to get the .Validation.Add method to ignore errors in the name supplied to it.
For reference, my code is this:
VB:
Private Sub cmdRefreshValidation_Click()
'Re-enters validation parameters to all cells to allow selections
Dim i As Long
Dim lastRow As Long
Dim sht As Worksheet
[Code] .....
View 1 Replies
View Related
Apr 10, 2014
See attached. I cannot get my indirect function to work in Cell K2 based on cell J2
Data for the Validation is in cells W1 to AC14
I want to do data validation in Column K based on Column J, but cannot get the indirect function to work to past into the data validation tool
I have named all my ranges.
AM Call Log.xlsm
View 4 Replies
View Related
Oct 6, 2006
I am setting up a spreadsheet for user data entry. I have one sheet set up as a template to enable users to copy the required data header cells to subsequent sheets and (the problem) - to different locations on the subsequent sheets. The template is using validated lists with the criteria drawn from the cell/list directly above the current list. For example, the cell in R11C2 is validated/refering to the range: =Campaign
The cell directly below this is validated/ filtered by: =Indirect(R11C2). This works great in the template, or any subsequent sheet in which the cells are all located in the same row/column. However, when the template is pasted in a higher row, the Indirect refers to R11C2 rather than referencing the cell directly above.
View 2 Replies
View Related
Sep 25, 2009
I can use a dynamic named range and a direct reference to the name and the DV works.
I can use a standard named range (not dynamic) and an INDIRECT() reference to a cell with the name of the range in it and the DV works.
But if I try to use a dynamic named range and an indirect reference to a cell with the name of the range in it, the DV fails.
Any workarounds out there? This project includes a LOT of DV lists, getting them to self-maintain is important if I can do it.
View 12 Replies
View Related
Dec 18, 2013
I can't work out why my indirect drop down list isn't working. I have named ranges and it works for the first couple but not for the rest.
Tab called 'Work record' is where the drop down lists are. 'Work Type' drop down works fine. Description only works when I select 'Doors' under 'Work type'.
View 3 Replies
View Related
Jan 29, 2013
I have 3 related dropdown lists that work perfectly, if you enter data from left to right. But, if you click in the cell containing the second list, which is based on the first list, of which nothing has been selected, you can just type any value in the cell. Is there a way to prevent this, or at least validate that what is entered is a value in the list.
View 5 Replies
View Related
Jun 20, 2014
I need to create a data validation drop-down that is dependant on what has been selected in another drop-down. However, all the solutions I've come across online so far suggest using the INDIRECT function, which is not appropriate in my case. This is because the data upon which the two drop-downs are based on is itself dynamic. My specific situation is this:
In one sheet, I have a list of university names in one column, and in the next column a list of faculties. The same university can appear multiple times in the sheet (once for each different faculty at the university). This information will be added to regularly, with new universities and new faculties added often.
In another sheet, I want a drop-down in one column that takes its validation from the list of universities. I then want a second drop-down that is only populated with a list of faculties at that university. The INDIRECT solution seems to only work if I can define a static range of cells from which to draw this data. How do I do it in my situation above?
View 3 Replies
View Related
Dec 18, 2012
I have a list of named cells (i.e. Group1, Group2, Group3, etc)
I have a form control that allows the user to select which of the groups they would like to include.
I need to create a series of formulas that average the price of all the chosen groups. So if they just want to average Group1, Group3, Group5 they could do so by simply selecting the checkboxes associated with those names.
I am struggling to be able to create a formula which will look at the list of chosen values and Average only those names. If all groups were chosen this would be easy as I would simply use the:=Average(indirect(a1),indirect(a2)...and so on. However that assumes that I always know which values are being chosen. I have a fixed list of choices but if they don't choose one of the options then the indirect statement will be referencing a null value which than either returns to me a #REF or will factor in a '0' which then throws off the average.
View 3 Replies
View Related
Jun 11, 2008
I am familiar with the use of the INDIRECT function to retrieve data from different sheets in a workbook. However, is there a simple way of obtaining a list of all sheet names in a workbook (I have about 50) rather than typing them into the sheet individually?
I can see them in the workbook properties but can't copy and paste them.
View 9 Replies
View Related
Jan 13, 2009
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
View 9 Replies
View Related
Sep 17, 2008
I have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
View 14 Replies
View Related
Oct 10, 2013
I was wondering if there is a way to see all the choices on a drop list. Currently the drop list only shows 8 choices but I am wanting to see all 32 choices eliminating the need to scroll the list. I have attached a picture.
View 4 Replies
View Related
Jan 5, 2007
Can we have colors to choose from,in the validation list drop down? Instead of values of text I want colors to choose from the drop down list. Once I click on the small arrow, I should have the color shades to choose from the drop down list.
View 9 Replies
View Related
Jun 1, 2006
I have a list of cells i want to select my information from and in addtion i want to select the list all except one value in a box:
eg......
Value in Box: C
List of Values:
A
B
C
D
E
F
G
Therfore i want in a validation list all the values (A - G) except the value represented in the box, hence (C).
View 9 Replies
View Related
Sep 2, 2006
I'm trying to make a sheet that will allow users to either pick from a drop down box, or if the choice they want isn't there, to input data in the same cell. That part I have got. What I can't do is figure out how to have excel add that user input to the list of options, so that they next time the drop down box is used, that "user input" will appear as an option in the drop down. I used data validation to do all these drop downs.
View 2 Replies
View Related
Oct 1, 2009
I have 13 sheets in my workbook (one for each month plus a GlobalSettings). In each month sheet I want to create a change event that prompts a UserForm when they select "Yes" from a drop-down validation list if it happens to be a month prior to the current month.
This is the code for the change event:
View 6 Replies
View Related
Dec 11, 2006
for some reason my data validation drop down lists have dissapeared. The relevent cells indicate that the data validation has been set-up, but the drop down list is not available for some reason.
View 9 Replies
View Related
May 3, 2006
data validation drop down list find
i have a data validation drop list of week starting dates. the list works great, but
i have to scroll through more and more as the year goes on...
?can we have a letter sensitive find (as in an access combobox)...?
View 6 Replies
View Related
Jun 5, 2006
I have not found a way to control the width of a validation drop down menu. I have 3 drop down list. Two of them are in wide column cells and one a narrow column cell. For some reason my narrow column cell gives me a wide pull down even though the length of the data in this field is only 3 to four characters.
View 2 Replies
View Related
Nov 21, 2006
I have noticed that all the cell dropdown lists i have (created by using Data | Validation | Allow | List) are very difficult to read its as though the font is size 8 or 6 or even less, is there a way of displaying the dropdown contents in a larger format? i have tried changing the font size of the named range and of the cell holding the dropdown but to no avail.
View 4 Replies
View Related
Jan 7, 2008
I have a workbook with 7 sheets, the drop down list operates correctly on all but one sheet, it used to work on all sheets. The arrow on the right of the selected cell dose not appear onthis particulr sheet. I have rebooted the PC and double checked the in-cell option. I have search the forum for similar problem and found the same problem but no remedy.
View 2 Replies
View Related
