I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
I have 50 sheets (1 sheet per staff member) that will be linked to a Master Sheet that compiles the data. The staff members are based in 5 teams of 10. The names of the sheets are based on the person's initials plus the words Progress Day,
All formulas in the master sheet are based around linking to 10 sheets so I can view the performance of each team. My problem is that the composition of each team changes quite often and so the links have to be manually updated for each team. Is there any way, for example, of compiling a table of team initials like the one below:
AT EF FY DE CB RO PR TA NE SK HS
that could easily be edited so that the formulae containing the sheet names relate to the table rather than static sheet names?
Eg., If AT left the above team and was replaced by PG then I would update the list above and the current formula
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[AT Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
would update to:
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[PG Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
I am looking for a way to delete all the range names in a worksheet, not the whole workbook. I have found several procedures that will delete all the names in an activeworkbook. For some reason it takes too long to run. Does anyone know how to handle a single sheet in VBA?
I've been referencing sheets in my code directly with things like
however in recreating a new workbook (to reduce bloat), the sheet-numbering has changed... to avoid having to mess around adjusting things again, I was wondering if it's possible to do some sort of indirection... something similar to
I want to do is copy data to my working sheet (say sheet-1) from other worksheetx (say sheet-2, sheet-3). That's easy enough, but I want to be able to indirectly address "sheet-2" or "sheet-3" from a cell in sheet-1.
Look at the attachment. The data under cost A, cost B, cost C is from other sheets in the same workbook. I want to able to type in "sheet-2" in the first column and Excel to automatically copy over the data in columns 2,3,4.
I do not want a VBA solution. I know this can be done with built-in Excel functions because I did it before. Unfortunately, I lost that spreadsheet and I can't recall how it was done. I tried using Indirect function, but it returns a ref# error.
I've tried to find the solution and the options I've tried I just can't get the code or syntax correct...
I have a workbook with 11 sheets in, 10 data sheets, and a summary
On sheet call "CB", I want to select any cell, then, via VBA, on sheet "Summary", in cells b4 to b14, where a4 to a14 have the sheet names, I want to reference the cell I selected, using the Indirect function....
I am using the INDIRECT function to get data from sheets with different names, with the format INDIRECT(SheetName&"!$A$1"), with SheetName defined as the contents of a particular cell which contains the name of the sheet. This works fine with the exception of sheets which have names starting with C01V. Is there something special about these names? If I change the 0 to O or the C to A, B or D, there is no problem. Sheet names C0, C01 also don't have any issues.
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
I am running the formula =VALUE(RIGHT(CELL("filename"),15)) to read the tab name in a workbook with 90 sheets. When a new account is opened, the operator inserts a new sheet from a template (which contains the above formula), and labels the tab to the account number. The formula then 'reads' in the account number and performs look-ups based on it.
The problem is that the sheets are only working when the sheet is active. They all seem to reflect the data in the active sheet or give me a #VALUE error. Where am I going wrong? How do I fix the problem?
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
In Excel, I want VBA to refer to the SENT ITEMS folder in Outlook. I want to loop over all sent items, and if the email address satisfies a condition, then record that fact in Excel. I am good at VBA in Excel, and I have a passing knowledge of VBA in Outlook, but I don't know how to refer to Outlook within my Excel VBA.
Dim FileToOpen FileToOpen = Application.GetOpenFilename _ (Title:="Please locate BlankSAMSRegister.xlsm", _ FileFilter:="BlankSAMSRegister.xlsm (*.xlsm),") If FileToOpen = False Then MsgBox "No file specified.", vbExclamation, "Error" Exit Sub End If Once this second workbook is open, how do I refer to each one within the subsequent code?
I really need the parent workbook to be named as wb1 and the child to be names wb2 so I can flick between the two in the next macro... I can get the parent using thisworkbook.name, but how do I get the child?
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
The summary page summarises the source data into how much revenue each department has made over 12 months.
However the formula in Summary worksheet column B will only total up the amounts if the month in the Source worksheet column B is the 1st of the month. How do I change the formula in Summary worksheet column B to purely go by month and ignore the day?
The "summary" tab will be calculating 20 statistics for each of the 30 or more tabs. In an effort to automate this - can I replace writing "January!" with a cell reference? For example; instead of writing = sum(january!a:a). Could I write = sum("A1"a:a), with the A1 Cell = january!. Obviously I tried this and it does not work but I am not sure if there are other options.
I'm trying to do is add a signature box (for inventory-taking accountability) directly below the pasted area after I paste it. Now, of course, the copied and pasted area could have 5 rows or it could have 15, and when I copy it from the first sheet and paste it into the second it doesn't preserve the name of the range on the second page, so what I really need to do to add the signature box directly below the last row in the pasted area is specify the location in relation to the last row in the pasted selection, but I don't know how to do that. Using ActiveCell always refers to the top-left-most cell in the selected area. So...
If I have an area selected, how do I refer to the bottom-right-most cell in that selection (in the same way that ActiveCell refers to the top-left-most cell)? Or at least the bottom row? Or, even better, the row below the bottom row?
A2 refers to a linked cell but I have tried without the link there still no joy. Together they would generate for example "DCA_RES" which would refer to a column range in a different sheet on the same workbook.
I want this to work so that I can implement more easily new lines to refer to different sheets. (Drag to copy) instead of having to copy and edit a formula 100 times.