I'd like to create a variable list. If a number is entered into B7 (see attachement), I would like that number of rows being inserted below. Starting at A8. But I would like the list to be variable. So if a lower number is entered, the rows would be deleted. And I would be great if the formulas could be maintained.
View 5 RepliesI've a protected sheet with one table with 6 columns and 1 row (to be filled), and the column headers.
I want to allow the user that will fill the sheet to insert more rows with a button (+) I want also to allow him to delete the last row with a button (-), except the first row, because the table must have at least one row.
How can I do this with vba code?
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
Does anyone have codes to insert and delete multiple rows. I need to run a macro where a dialog box pops up requesting number of rows to insert and delete.
View 9 Replies View RelatedI have a worksheet that has been created to essentially request information needed to determine a demo system configuration. Within this worksheet there are a series of checkboxes that if checked, will need to have the form extended (i.e. add additional questions to clarify say a model or manufacturer). For example, if the Yes checkbox is checked next to a question I want a macro to copy some rows from a hidden worksheet within the same workbook to the bottom of the non-hidden worksheet. If the No checkbox is clicked, nothing should happen. Furthermore, if a user accidently click Yes but didn't mean to I want the added rows to be removed. This is further complicated by the fact that there are 2 or 3 questions that have check boxes that can add additional questions.
View 9 Replies View RelatedI have a large data file. In column A is 8760 entries (every hour of every day of the year). Columns D & E are linked, Column D is the time and date whilst Column E is a parameter assocaied with that time and date.
There should also be 8760 entries in these columns, however there are some missing data lines in columns D & E. I would therefore like to move the rows in columns D & E so they match with the entries in column A. Can anyone help? I have a headache as i have over 70 files to complete this operation on.
I have a worksheet that I have some "locked" cells on. I also have protected the worksheet but when I check to allow users to insert rows and to delete rows and then save it, when I re-open it I can't insert rows or delete rows???
I am using some VBA to allow for the collapseing of rows while maintaining protection and that works perfectly. I want users to be able to insert and delete rows while maintaining protection. I thought a simple check in the protection was good enough, but for some reason it isn't.
I am working with a spreadsheet generated from software that keeps track of fuel usage for a large fleet of vehicles. The data comes out looking like the snapshot below.
******** ******************** ************************************************************************>Microsoft Excel - June Fuel Transaction Listing.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA3=ABCDEFGH3 Transactions for CUSTOMER ID: 0000CUST7 Sales 4 5 6Product summary for Vehicle ID 00001080 7 8Product Description Transactions Quantity9 101 Unleaded 3 57.60 GL11 12Hose summary for Vehicle ID 00001080 13Site ID HoseGradeProductTransactions Quantity140001 2113 57.60 GLJune Fuel Transaction Listing [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to get the data into a more convenient format for analysis. I need a macro that will:
1) Take the text "Product summary for vehicle ID 0000****", extract the last 4 digits of the text, and paste it where the 1 is under the Product heading (a10). Those digits are the actual fleet number, and I need to separate them out from the rest of the text. The digits will change for each vehicle, so the macro should just move down the spreadsheet doing the same thing for each instance (the setup you see is repeated for every vehicle).
2) Once the first goal is accomplished, I would like the macro to then go back through and delete every row except for the rows with the pertinent data in them. So this means I would only want one row per vehicle and all rows would line up directly below each other like demonstrated below.
******** ******************** ************************************************************************>Microsoft Excel - June Fuel Transaction Listing.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA10=ABCDEFGH101080 Unleaded 3 57.60 GL111081 Unleaded 6 84.70 GL121122 Unleaded 5 47.00 GL131182 Unleaded 8 95.80 GLJune Fuel Transaction Listing [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a spreadsheet that I use throughout the day and have to send an email to another person when a customer makes a payment. The number of products they pay for will be different each time and I have the code to copy the right cells into an email and the code to insert the right number of rows for how many things the customer is paying for however as I use it multiple times through the day, I need the code to insert the right number of rows, copy it over to the email then automatically delete the rows it has just inserted so it is back to basics so I can use it again.
The code I have for the inserting the rows (from searching through forums) is:
Sub PRows()
Dim NextRow As Long
Dim NrOfCopies As Long
Dim i As Long
Const NrOfCopiesDefault = 1
Const NrOfCopiesMaximum = 9
[code]....
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A
B
C
D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
I have columns 1 to 5 that requires user input. At the beginning of first row, i have created two buttons +R to insert row and -R to delete row. I used macro recording to get this done. It works well but I need both buttons to be copied on for other rows as well. Let me re-explain, when a person clicks on +R in row 10 I need a new row inserted at row 11 which both the buttons +R and -R copied in. When a person clicks on -R at row 10, i want row 10 to be deleted. the first default should never be deleted. All rows should be added before statistic as statistic row will calculate all the inputs from user start to finish. Can this be done?
123456+R
-R
Statistic: PLS refer to this diagram
12345+R,- R
Statistic: ignore this diagram
I even tried http://www.mvps.org/dmcritchie/excel/insrtrow.htm but it is not working. I am not sure where I am doing wrong.
I need to change the colour of cells depending on contents. The following code works perfectly until I try to insert or delete a row in the worksheet. Then I get Run-time error 13, Type mismatch.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Set I = Intersect(Target, Range("E5:E100"))
If Not I Is Nothing Then
[Code]....
I need to work out a total of column A7:A39. Even with my lack of excel knowledge, I can do that with the sum formula. But, each week, I need to delete the values in A39 by deleting that row, and inserting a row into A7 and putting different data in.
I have my $ signs in place to make sure the formula relates to that column only, but when I insert the row at A7, the formula moves to A8:A39 not A7:A39. Basically I need to be able to delete and insert but still be able to view the sum of A7:A39 at all times.
I have two sheets, they basically contain shifts. They are laid out identically the only thing that changes is the date along row 1. In order not to have to recreate the workers from sheet1 onto sheet2 I use the following
View 2 Replies View Relatedas per the attached, need to insert those grey rows subject to the following condition :
if current row date <> next row date, .and. current row latitude / longitude <> next row latitude / longitude , insert grey row with date = current row date, else insert grey row next row date
note that the coordinates in the repeated grey rows, for the "Home" location, are the same through the sheet, should be entered by the user, at the beginning of the process, since there will be a spreasheet per user.
date is in column K
latitude / longitude are in columns B / C
this will be of tremendous assistance in automating mileage claim review.
I am working on a contact information form for given relationships, and I'm trying to figure out the best way to design a button that copies the "form" (not an actual VBA form but a grouping of formated cells for information collection) and inserts it into the document. I would also like a button that deletes unused and empty forms so that we only print forms that are filled in.
I tried recording a macro to do it, but it's messy and creates issues with hidden rows and pagination.
I have a button (group containing and add and delete button).
I want to identify the row (position of shape/button calling the macro) to enable inserting a new row (1 row down from current row).
Then do the same to delete a row (position of shape/button calling the macro) to enable deletion of selected row.
This will allow me to add/insert rows by the button located at that row
The problem i have is getting the row property (row position of the button eg. TopLeftCell.Row) of the add button. The add button (RowBtnAdd) is a shape within a group (BtnGrp)
I also note that when a group is copied, it has the same shape name as that copied.
I want to keep the add and delete shape within the group (BtnGrp).
I do not want to select a cell or row or enter a row number to delete etc.
refer to sample workbook attached. Currently only has one record row.
I am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
I have a worksheet with many different formulas in many different cells. When I insert or delete a row, there is one formula in one cell that does update to reflect the change in rows. The cell is located several rows below the section where rows are changing. It is a simple formula too. Here is the formula: "= SUM($E$3:E11)*0.09". If I delete more rows that cause the highest row number to be less than 11, this formula updates. If I insert more rows and go beyond row 11, the formula does not update. I have tried using $E$11, $E11, and E$11 to no avail.
View 9 Replies View RelatedI'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI need to do something to my workbook, and I need to do this task:
When I insert/delete a column between E & F in sheet 1, the formula (not the value) in the column E was applied too to the new column I've inserted/deleted..
Then, when that happened to the sheet 1, It would happen too to the other sheet automatically..
So I don't need to insert/delete the row and copy the formula manually for each worksheet..
I know that I could simply solve it with grouping the sheet tab..
But I have plenty of data that needed to be inserted and applied with the formula..
I will attach the little example : insert.xlsx
And one more thing, I received this VB code from [URL] ..... for inserting the column:
VB:
Private Sub Workbook_SheetBeforeRightClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
And this code for deleting the column:
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.