after finishing a huge macro, the last step is to take row 1 of sheet 1 and insert it at the top of every worksheet.
This is the first way I tried it. It does absolutely nothing (except copy the row).
For Each ws In ThisWorkbook.Worksheets
Sheets("Sheet1").Range("1:1").Copy
ws.Range("1:1").Insert Shift:=xlDown
Next ws
This was another try, which resulted in a 1004 "Select method failed" error
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
I'm having a problem with how excel opens my files. Up until yesterday when I would open any of my spreadsheets they would open seperately. I would have multiple files open across my taskbar and could easily switch between files with a simple Alt-tab windows function.
Now when I open multiple excel files it opens them under "one" file so to speak. The only way to switch between files is if I go to Window>then select the file I want or minimize within excel so I can see the other spreadsheets.
I am trying to find a vlookup formulae for multiple spreadsheets in excel.
I have the below data that i need to lookup, test and produce an output.
Main Spreadsheet:
Column B...........................Column C
A 0000564235.................... <Desc> <---- Desired output is Coumn C from searching all part numbers in each spreadsheet.
Spreadsheet 1:
Column B (Part No.) ..........Column C (Desc)
A 0000564235................................Hose
Spreadsheet 2:
Column B (Part No.) .......Column C (Desc)
A 02315645646 ............................Clamp
Spreadsheet 3:
Column B (Part No.) .......Column C (Desc)............
I was curious if there was a way to combine multiple spreadsheets that have multiple tabs all onto 1 spreadsheet?
View 9 Replies View RelatedI have a workbook that I add about 20-35 tabs in a month. To individually go through and protect the sheet will take too much time, is there another way where I can select multiple tabs so the worksheets can be protected?
View 8 Replies View Relatedi have admit forms for multiple patients, about 200 or so already done, and its set up to make an upload sheet, which we then add all of them to one big file to import to access. i am in the process of cleaning things up, but we need to add a formula to a cell to determine length of stay, and several similar things, but i'd like to not have to go and do it file by file.
is there any way to update all the files at once? some kind of automation? then changes would be in the same cell for each file.
or maybe some way to do a batch modify or something, so it can make the change, and run the two macros, one to make upload for file, one to dump it in the file that goes into access.
I have a workbook to collate ratings for staff, there are three sheets, one is a summary of data, and two are sheets that can have data entered into them, called "Eligible" and "Ineligible".
I would like to write a macro to search cells in "Eligible" that contain a staff number, and copy this data to "Summary". If excel encounters a blank cell, i.e it has no staff number in it, it will move to she sheet "Ineligible" and perform the same operation, pasting the data below that which has been copied from "Eligible"
To further complicate things, every time the macro runs to populate "Summary" I would like it to clear the existing data in "Summary", to allow for deletions in "Eligible" or "Ineligible".
I'm trying to set up conditional formatting to show when an employee is both scheduled to be working for the current date, and is trained in a particular task.
I have a spreadsheet called "Training" for all of the tasks that employees can be trained in, with the employee names in each row, and the task names at the top of each column. The intersection of an employee's row with a task's column will have an "X" if the employee is trained in the task. This is the spreadsheet that I'd like to be formatted; if the employee is trained and also scheduled to be working, I'd like to the "X" to change to a different color.
There are separate spreadsheets within the same workbook for the schedule. This is a bit more complex since the since each week of the schedule has its own spreadsheet within the workbook; each spreadsheet is named for the Saturday of the week it is for, such as "06-07". I've been able to successfully have other formulas in the workbook auto-adjust to the current week's schedule by using variations on the TODAY function (something like INDIRECT("'"&(TEXT(TODAY()-MOD(WEEKDAY(TODAY(),1),7),"mm-dd"))), but I'm not sure how to incorporate this into conditional formatting. On each schedule sheet, there is a column for each day of the week and a row for each employee. The cell for a given day will contain the employee's schedule if they are scheduled, or it will be blank if they are not scheduled. So, the conditional formatting formula would just need to check to see if the appropriate cell was blank or not.
I am creating a MIS for my team. But I am now struck while creating dashboard. I have a workbook with 12 raw data spreadsheets for specific months. Now what I want is that in 13th sheet if I select January then 1st cell in 13 sheet will show the value January cell 1 value. However if I select February then 1st cell in 13th sheet will show the value of February cell 1 value.
View 7 Replies View RelatedI have several excel spreadsheets by which I would like to add together certain values in the column with the same columns of all the other excel spreadsheets. So basically, If one of the values are "SELF" , I would like to calculate how many times that value occurs in all the spreadsheets. Any easier way to organize the data to be able to do this also.
View 1 Replies View RelatedHow can i combine multiple Excel Spreadsheets into one Spreadsheet ?
View 3 Replies View RelatedI have a master spreadsheet that links to various other spreadsheet for budget figures. I have now created and updated the budgets for the 2008/09 budget year.
It is painstaking to update the links and browse to the new files one at a time and point them to their new folder. Is there a way I can update all of the link workbooks to the new directory in one fell swoop?
I need to combine these 6 spreadsheets into one single spreadsheet. It won't seem to allow me to paste it.
It needs to begin with 2012 and count down.
2011.xls2010.xls2009.xls2008.xls2007.xls
I have a workbook with two spreadsheets. One contains customer information. The other line items and shipping information. I would like to pull the customer number over to the line items spreadsheet. Both spreadsheets have the order number, but note there is a new line for every item in an order on the line items sheet. How do I accomplish this?
View 2 Replies View RelatedThe company deals with Machine services, we maintain, service and brake-fix machine problems, the machines are manufactured my ourselves and there are approximately 15 different machines.
We have a Field Service spreadsheet that is filled in by all service engineers for every job they go on, this is filled in with information like:-
Serial Number
Machine Type
Hours Run Time
Reason for Visit
Reported Problem
etc, etc
All the forms are identical so all the fields are identical
Field Service Record Spares 2013 Master Rev4 (2).xlsx (this is the correct file). The forms are then saved on a central server folder and stored in month order.
Is there a way of creating a master excel sheet to gather all the information from all the Field Service spreadsheets which would then allow me to search all sheets by serial number or fault, without me having to copy and paste all the information into the master sheet??
We have 10 service engineers and each fills out 1 sheet per job per week, so a 4 week job will have 4 sheets for 1 engineer. an engineer could go on 5 jobs in 1 week and would therefore fill out 5 sheets. so we could be looking at in excess of 500 Field Service spreadsheet per year.
I currently have a macro that can be used by multiple spreadsheets. Is there that I can execute the macro within any specific spreadsheet without saving it in each spreadsheet. I just want to place it in a general spot so that in case there is modifications, I only have to change it in one place.
View 14 Replies View RelatedI have created with most of it being done by Austrada (who has done a great job) code to copy multiple spreadsheets into 1 spreadsheet. We have run into a error Run Time Error '9'. Subscript out of range.
Sub CopyData()
'----------------------------------INFORMATION----------------------------------------
'You need to make sure you have activated the Scripting Runtime reference for the FSO to work
'--------------------------------------------------------------------------------------
Dim fso As New Scripting.FileSystemObject
[Code].....
I have 5 sheets in my workbook and I need to find out if a string exists in any of them. The string would always be in column L of the work sheet. I have searched many places but cant seem to get anything to work, is this possible?
View 8 Replies View RelatedI am attempting to amalgamate several (100+) spreadsheets into a single spreadsheet. The data is very simple (only three columns, several rows). I have written a simple macro to copy 5 spreadsheets (called TIMESHEET1, TIMESHEET2 etc) into 1 spreadsheet called AMALGAMATED TIMESHEETS. I would like to expand this using a FOR - NEXT loop if possible - or any other way that someone can think of! I cannot use the variable TIMESHEETx as this is not accepted......
View 9 Replies View RelatedIs there a way to automate the importing of macros into a list of files ? I have a number of files that I want to add some code to and was wondering if this could be automated as opposed to adding the code to each file manually as it's going to be a regular job.
I've written a routine to loop through the list of files and open them, I just want to know how, if possible, i can automatically import the required macros.
I am trying to find a code that will allow me to generate multiple sheets depending on what is selected in one specific column. I have found a code that is perfect for this however I can't seem to set the range. For example instead of copying all of column headings I only need to copy up to column AN2.
View 1 Replies View RelatedAny application that can integrate with Excel to display, in a timed rotation, multiple spreadsheet files to display live information.
I can use vba to create a screenshot on a timer and feed it into a screensaver folder, but I'd prefer to not go that route if possible.
Is there a way to lock and unlock multiple excel spread sheets with only one password at one go? For example if I have 5 sheets, I would like to be able to lock and unlock Sheets 2-5 with one password at one go while leaving sheet 1 unprotected. Do not want to type a pwd for each sheet.
View 9 Replies View RelatedI am currently using Excel 2003. I have a worksheet with two tabs.
First tab has a list of bank Names. Second list has Bank Names and balances.
I need to find out the the average from a Bank in the first tab, to the same bank on the second tab that reflects the balances.
My problem is automating a process that takes information from a single column with a range of D7:D77 in 22 spreadsheets and places this information in a summary spreadsheet as rows corresponding to the names of each spreadsheet. This is within the same workbook.
For example say spreadsheet A1 has a column from D7:D77 I would like this information in a summary spreadsheet with the row titled A1 and D1:D77 transposed. This would then be repeated for the remaining spreadsheets
I have built a timsheet template which I intend to issue to c.140 personnel in my company to fill in for the month of May. On receipt of these timesheets, I will save them all in one, specified folder. I would then like to consolidate the total number of hours worked by adding cell N53 from each timesheet received. Is there any macro/ VB script which can add the contents of a particular cell (N53 in this case) from all the spreadsheets contained within a particular folder?
View 2 Replies View RelatedI'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
Here is a copy of what I have
Code:
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array( _
"OLEDB;Provider=Microsoft.ACE.OLEDB.12.0;Password="""";User ID=Admin;Data Source=C:Documents and SettingsUSERNAMEDesktopSCHEDULE STUF" _
, _
"FAcrewCurrent.xlsx;Mode=Share Deny Write;Extended Properties=""HDR=YES;"";Jet OLEDB:System database="""";Jet OLEDB:Registry Path=""""" _
, _
";Jet OLEDB:Database Password="""";Jet OLEDB:Engine Type=37;Jet OLEDB:Database Locking Mode=0;Jet OLEDB:Global Partial Bulk Ops=2;J" _
, _
"et OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password="""";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt " _
[code].....
Is there a better or simpler way to do this? The tables don't need to be forever linked to their previous spreadsheets so if copy/pasting is a better way than I am all for that as well.
I have come up with 5 countif formulas that work perfectly separately but need them to be combines into one big criteria.
=countif(PM[ProjectAge],">=200"
=countif(PM[Customer Name],"*" & purch & "*"
AND so on for each criteria. H
I am having some trouble with the vba code I'm using to reference pictures. Now please bear with me, I'm don't know vba whatsoever and am copy/pasting what I found on the internet.
The spreadsheet in question is attached....
The issue:
I am trying to show a picture based on the inputs in the cells above. Basically the picture in cell A28 is referenced by the information in cell AI7. The picture in cell D28 should be referenced by the information in cell AI8 and so on.
The problem is that when I enter the code to insert multiple pictures, it comes up with errors.
I'm hoping this is just my lack of programming knowledge and this is an easy fix. Please tell me where I am going wrong.
Also, will there be an issue if I reference the same picture multiple times?