I have a spreadsheet with sheet numbers that are controlled by the tab name. Is it possible to limit how people name the tab? For example, my sheet numbering must be: 101, 102, etc. Thus the tab would of course be 101, 102, etc.
View 9 RepliesI have successfully generated my code to validate the 60 + text boxes in a MultiPage UserForm. Now I need to identify those TextBoxes that require validation. To aid me I have distinguished those which need to be validated by naming them with a unique suffix, (i.e., _Text vs. _Txt). This code will participate as a Boolean within a With statement as part of the identifying validating code. I realize that a
Right(?, 5) = “_Text”
statement should do the trick but I can’t seem to correctly get the appropriate syntax to use within the parenthesis. Any suggestions? Is there a better methodology out there to accomplish this?
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedCode:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I would like to hyperlink the names in sheet 1 to the same names in sheet two. Is there a way I could do this using a formula rather that do each one by one?
View 3 Replies View RelatedI have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
I've a worksheet, which has formulas, links, combo list box and format control.
I've made a user form to enter the data, so that the particular cells in the worksheet is filled and the remaining cells are calculated as per the formula.The format control (combo box) has list of range.
Is it possible to bring this format control (combo box) on the user form, so that without going to the sheet, I Can control the sheet by selecting the combo box values.
I have a spread sheet and I want to have multiple option buttons on it. but for separate things
e.g. I need roughly 50 option buttons. however. I want about 25 groups of them.
so I want 2 buttons next to a cell where user can select one. then I want 2 more on cells below where user selects one for a different question
but at the moment, every single option box copies every other box when I changed the format control cell reference. even though I haven't copied and pasted them!
I have a workbook with 20 sheets, including a control sheet 'Validation Table'. By setting the required Background/Font in a cell named hdrDefault on sheet VT, I want to click a button on VT to invoke a macro to visit each sheet and set the named Header range, hdrxxx, to the same Background/Font. Originally had the code in a Private Sub linked to a button event, but this can't break out of the worksheet so have moved the Sub into a Module, and calling from the click event:
Event:
I would like to know how to configure buttons:
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
I Have a sheet with 4 activex comboboxes and 3 text boxes. If the right item is selected in the second combo box a user form opens up. That has 4 text boxes. It has a command button titled ok that takes the information from the 4 text boxes and puts them in a sheet called data.
Code:
Private Sub cmbOK_Click()
With Worksheets("Data").Range("A1")
.Offset(1, 8).Value = Me.txtFirm.Value
[Code]....
I need a way for the above code to run when the ok button on the user form is clicked.
RE: Macro ActiveX Click Control--It stops when on another sheet
Macro runs OK when run from menu.
An activeX click button was put on sheet B.
Right click the control, View Code, Paste in code from macro, then click button.
It runs the part of the macro that applies to sheet B, goes to previous sheet A, and then stops. The range select line for the named range on sheet A is highlighted in yellow. It stops when selecting any range or cell on sheet A, like B2.
Any idea why this code does not work on sheet A when ActiveX button is on sheet B? Is there someplace else that the control can go? Using Excel 2000.
See part of code below, which starts on sheet B:
' Macro recorded 11/22/2007
Range("SortAll").Select
Selection.Sort Key1:=Range("T2"), Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
ActiveSheet.Previous.Select
Range("FormBase").Select (STOPS HERE)
Selection.Copy
Range("Formul").Select
ActiveSheet.Paste
ActiveSheet.Next.Select
FormBase is a named dynamic range
FormBase=OFFSET(A!$A$2,0,0,1,MATCH(1E+306,A!$2:$2))
I import some text from a web page. The data is separated in rows and columns so it easily slip into cells in a nice row and column manner.
Now, I want to parse some names in one column (column A:A). The names do not reside in any other column. I want to change the content for those cells that is "Alpha Beta" into just "Beta", and I only want the replacing to be carried out on a specific sheet (named "Import").
I've recorded a VBA script and it look like this:
Cells.Replace What:="Alpha Beta", Replacement:="Beta", LookAt:=xlPart,
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False
But, when I try different setting for the range I get the same script, I mean, for when I try the search & replace with settings for both the whole workbook and for the current sheet.
How can I control the search & replace with VBA to only be valid for a defined sheet?
I have an excel sheet which at the moment takes it name from a cell on that
sheet, but what I would like to reverse if possible. How can I get the sheet
to name itself from a cell. I'm sure I've been on a web page in the past
with this info on it, does anyone have the link?
I’ve had a look through the forum and on some of the guides/FAQ but thanks to my ineptitude I have been unable to adapt any of the examples to my specific situation.
What I’m after is this: I need to create a summary sheet for a work book with a variable number of tabs. All I need the summary sheet to do is to make a table of the name of the tab and then cell A17. How would I go about doing this and is it possible to save this macro to my machine/all workbooks instead of just the one?
I am using the Microsoft Date and Time Picker Control 6.0 (SP4) from the more controls option on the developer Ribbon. The issue I have is when I protect the sheet I lose the functionality?
I have ranges selected as editable by user when the protect is on - this includes the linked cell to the date picker but it still doesn't work.
In Column A row 4 of sheet1 I have an account name, for example Sonic, and I have a sheet named the account name, Sonic. In Column B row 4, of sheet1, I would like to return the value in Column B row 3 in sheet named Sonic, or the account named sheet.
I have about 50 different account names along Column A in sheet1, and the same account name sheets opened in the same workbook. Is there a good formula or vba code that will work for all the values in Column A of sheet1 to look for the same named sheet and return the values off of that? Note: on the account sheets in Column A it says ‘Account’ for all of them.. this wasn’t a mistype
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
I have got a workbook with about 200 sheets... Sheet1 > Sheet200
i need to delete about 100 sheets... sheet100 > sheet200
i then need to add the sheets back in but when i do the sheet numbers start from Sheet201... how do i get it to start from Sheet101 again or can i use some vba to change them later?
I wrote the following macro to create hyperlinked Table of contents on the first sheet of a workbook. It works great unless the sheet name has a space in it, i.e. "new sheet" as opposed to "newsheet". Any way to get it to work for either/ or?
Originally Posted by Code
Sub Hyperlink()
'
' Hyperlink Macro
' Macro recorded 2/26/2007 by bpillsbu
'
'
Dim ShName As String
Dim ShCt, N As Integer
Dim Sht As Worksheet
ShCt = ThisWorkbook.Worksheets.Count
Range("A5").Select
N = 1
Can I have the name of a worksheet change based on a cell value, without a macro.
View 1 Replies View RelatedHow can I obtain the sheet-level name through VBA? I'm not referring to the sheet (tab) name but the name as defined though Insert/Define or Insert/Create, etc .
I know the way to get the cell level name goes something like this:
MsgBox Sheet1.Range("A1").Name.Name
But i don't know the correct syntax for sheet level.
I made a macro that will name the current sheet whatever text is found in cell B2 on that sheet. This works great unless that sheet name already exists.
If the sheet name already exists, is there a way to rename it as Cell B2 plus the number 2 after the title so it doesn't cause an error?
Example:
"Smith, Bob" is a sheet name, so the macro would make the new sheet name "Smith, Bob 2"
Alternatively, how could I give a pop-up telling about the error and deleting the current sheet instead of renaming it with a "2"?
Eample:
"Sorry, 'Smith, Bob' already exists. Deleting new sheet." as a popup and have it delete the current sheet.
I have searched the forum and I have seem quite a few referrences to this question but can't find exactly what I'm looking for. I'm using the first sheet in the worksbook as a splash screen which has lots of button macros on there. I want to add one more which will make a list on this sheet from cell b25 down with all the sheet names in the workbook which are also clickable hyperlinks. Does anyone have any idea how to do this, so far I can make a list of the names..
Sub Index()
Dim ws As Worksheet
Dim I As Long
I = 25
For Each ws In Worksheets
If ws.Name "Actions" And ws.Name "summary" And ws.Name "Archive" Then
Worksheets("Summary").Range("B" & I) = ws.Name
I = I + 1
End If
Next ws
End Sub
But have no idea how to make these names clickable which will make the relevant sheet active. If it helps the sheet name is also in cell A2 of every sheet.
I have done a formula for Abbott as shown below however I actually have about 50 sheets with names. I have the names listed in column A. Is there a formula that instead of typing Abbott as shown I can use the cell in column A to generate a code ?
Running Windows CP; Excel 2003
The Board looks full of some interesting issues today.
I'm working on a workbook that hides and unhides a lot of columns depending on the month the user has selected. No problems here.
The sheets are named regionally, ie National 2008, California 2008 etc. The user is able to select the month and the year from separate combo boxes.
So when 2009 comes around I will need to rewrite many lines of code to point the VBA to the new worksheet names like National 2009, California 2009. My question is, is there a way to reference either variable worksheet names in the VBA or some other manner in which to write the code so I don't need to rewrite every year change?
I currently reference the sheets something like Sheets ("National 2008").Range("H:H").EntireColumn.Hidden=True
I have a workbook with 40 or so worksheet tabs in it. How do I extract the names of these different tabs into, lets say Column A??
View 9 Replies View Related