Join Various Columns From Two Data Sheets
Jan 6, 2009
I wish to join few columns from two data sheets using Macro function.
Sample
Sheet 1:
A B C D E
1 Headline Msg1 Msg2 Msg3 Msg4
2 Car Post Join Help AAA
Sheet 2:
A B C D E
1 SumNo Msg1 Msg2 Msg3 Msg4
2 CM001 Join Help AAA BBB
Output;
A B C D E F
1 Headline SumNo Msg1 Msg2 Msg3 Msg4
2 Car Post Join Help AAA
3 CM001 Join Help AAA BBB
View 4 Replies
ADVERTISEMENT
Sep 11, 2007
I have two Worksheets: ' Forecast' and 'Actuals'
'Key' for Rows in both sheets is:
ProjectNumber, Change Order Number, Role (Text Desc)
Data for Forecast is Jan, Feb, Mar-> Project Forecast in Days
Data for Actuals is Jan, Feb, Mar-> Project Actuals in Days
Rows in Forecast Sheet may not have matching Actuals (e.g. Project not yet started), AND VICE VERSA (e.g. a new Role may have been needed on a Project, not anticipated at Forecast time, or Actuals are being recorded for a Project without a Forecast being created).
What I would like to do is:
Create a single Sheet with the same key as above,
Each row containing columns for 12 months of Forecast Data, and a further 12 of Actuals Data.
Where an exact key match is found, Row will have both sets of Data (one set from each sheet). Where a match is not found, then Row will have either Forecast Data OR Actuals Data only.
This task needs to be repeated, so needs to be either a straightforward manual procedure, or a Macro.
I have tried various combinations of VLOOKUP, but that doesn't help pull in data that has no matching key. I realise I could manually create a 'keys' Sheet, de-dup and use VLOOKUP into both sheets, but this seems horribly long-winded.
View 5 Replies
View Related
May 31, 2012
I have a list containing hundreds of rows and I need to join the cells in different columns.
Eg. Col A, Row 1 is "Red Maple"
Col B, Row 1 is "Acer Rubrum"
Col C, Row 1 is "60mm"
I need to join the row into one cell reading "Red Maple Acer Rubrum 60mm"
View 2 Replies
View Related
Jan 11, 2008
how to add two columns of single words together, so that all possible word combinations are seen. For example:
Column1:
Horse
Pig
Dog
Sheep
Column2:
Run
Walk
Sit
Roll
So... I'd like Column3 to look like this:..........
The issue is I have about 100 words all together so there will be a lot of results! Is there a way I can enter a formula to do this?
View 2 Replies
View Related
Jan 14, 2014
I'm trying to write code to join two columns of data, and then join all of those into one cell.CA
California
DE
Delaware
CT
Connecticut
I want to be able to run the macro and have it put {"CA":"California","DE":"Delaware","CT":"Connecticut"} into cell C1.
I was thinking that this would have to be a two part macro. First, it would take each specific row and join CA and California and add the colon, quotation marks, and the comma, and put it Column C. Then, after it's gone through every row, it would join every cell in column C together.
This is what I've written so far:
VB:
Sub test1()
Dim r As Range
Dim lr As Integer
[Code]....
Now I need to figure out the second part. How do I then take all of the join cells in column C and join them together, adding the curly braces at the beginning and the end, and removing the comma from the very last row?
View 4 Replies
View Related
Aug 22, 2007
I am trying to join 2 tables which have identical columns. The columns are:
A B C D E F
Date : Name : ID : Violation : Date Sent : Comments
Table 1 has information in columns A-E, Column F is blank
Table 2 has information in columns A-F.
I want to be able to check the information in Columns A-E in both tables and add the information in Column F from Table 2 to Table 1 where Columns A-E are an exact match.
View 9 Replies
View Related
Feb 9, 2008
I have a marco that works perfects to Concatenate (join) all of the cells in Column A. However, I want to seperately join all of the cells in each column. So I wanted to the Concatenate of Column B to go in B1, Column C to go in C1, etc (or until there is no data in a column). I think there is a way to change this into a loop, but I don't know how. Below is the macro I have now.
Sub ConcatenateAll()
Dim x As String, rng As Range, cel As Range
With ActiveSheet
Set rng = .Range("A2:A300")
For Each cel In rng
x = x & cel.Value
Next
.Range("A1").Value = x
End With
End Sub
View 2 Replies
View Related
Jun 7, 2012
I use the following code to merge all data a "master sheet", but I want to take the data and put it next to each other on the "master sheet", not under. For example, my range of data is "A1:D15" and I want to copy from all sheets. So my first paste would be A1:D15, then the next should be E1:H15.
I would like the code to find the used range, like it does currently.
Code:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
[Code]....
View 1 Replies
View Related
May 26, 2014
We have approximately 100 rows x 200 columns of data and would like to combine the contents into one row. Is this possible without copying and pasting many times.
eg
1 abc dek jui kol
2 ppo adf asd dfa
into one row
1 abc dek jui kol ppo adf asd dfa
View 3 Replies
View Related
Apr 20, 2009
I want to take a cell with a persons first name and a cell with their last name and combine into one.
EX.
What I have.
A1 B1
John Smith
Walt Smith
What I want.
A1
John Smith
Walt Smith
View 9 Replies
View Related
Jan 29, 2008
I have 2 set of tables:
Table 1
A 123
B 231
C 234
Table 2
A 321
B 585
C 358
How can i make it like using any tools (I presume vlookup can do the trick) as i have thousands of rows to match. Cant do it manually.
A 123 321
B 231 585
C 234 358
I have a feeling to use v lookup, but not sure how to use it.
View 3 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
Jan 7, 2013
Within 1 workbook, I have two worksheets:
Worksheet1: (multiple entries per individual)
A
B
C
D
unique ID
Name
Start date
Salary
123
Rose
12/01/2005
35,000
[code].....
Worksheet 2: (single entry per individual)
A
B
C
D
unique ID
Date of Birth
Benefit Plan
Termination date
123
12/01/1975
A
12/01/2006
[code].....
I am looking for a formula that will allow me to marry up the data sets by unique ID. I want to take the single lines from worksheet 2, and pull them over to sheet 1 and replicate where the identifier matches. So, Worksheet 1, would end up w/ columns E F G H, and additional data for each individual.
Unique ID, Name, Start Date, Salary, Unique ID, Date of Birth, Benefit Plan, Termination Date.
123
123
View 3 Replies
View Related
Aug 9, 2007
I am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
View 2 Replies
View Related
Jun 19, 2014
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies
View Related
Aug 9, 2012
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
How to do it in a most efficient way?
View 4 Replies
View Related
May 25, 2014
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
View 14 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Jan 25, 2014
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
View 1 Replies
View Related
Aug 26, 2009
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
View 4 Replies
View Related
Aug 19, 2008
Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).
Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).
Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)
Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.
View 5 Replies
View Related
Dec 4, 2013
How do I get the first 4 columns to appear on all sheets?
We have a database of 1000 children. I have a workbook with a few sheets, each sheet tracks different information about the child. I'd like their Names and Dates of birth to appear on all sheets. Right now, I've simply copied those 4 columns to each sheet (and frozen them) but since we are constantly making changes to the list of children, I'd like to just make the change once. (I've tried selecting all sheets when adding or deleting a name, but somehow they never coincide correctly.)
Is it possible to have 4 columns appear on all sheets? (but not as copies of themselves)
View 4 Replies
View Related
Jun 3, 2014
My requirement is to match 2 columns of two different sheets. I know about Vlookup for exact matching but here I neeed to do partial matching.
For Example: Sheet1 Company Name= Opera Technologies
Sheet1 Address= 104/Main Street
Sheet2 Company Name= Opera
Output should be like this in different column: Opera, 104/Main Street
View 4 Replies
View Related
Apr 30, 2009
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91'
Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings.
I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.
View 4 Replies
View Related
Apr 20, 2006
I have an excel workbook with 7 worksheets. I am wanting to autofit columns (A:G) on the last 5 sheets using VBA.
View 3 Replies
View Related
Sep 26, 2006
I'm trying to cmpare two excel spreadsheets, each one of then have 3 columns with column A being the KEY to lookup and compare records into another spreadsheet. So in my example spreadsheet If u take cell ZVNA!A1 and lookup for values in ZSKU!A* and find a match then comapre the B1 and C1 in respective ZSKU! Column B and C. If there is a record for A1 in ZVNA then comapre it's column B value with column B value of ZSKU, and column C value with column C value of ZSKU. I have not used macro/vba before so if you could tell me formula based solution that will be good or point me how to use macro. I did Vlookup but it did not return me 100% accurate result may be bec my format of column is not accurate.
View 2 Replies
View Related
Nov 28, 2006
I am trying to loop all columns in each of a number of sheets using current region.
It selects the current region OK but the column counter only shows 1 as the number of columns in any sheet.
The Cells(6,1) likely has something to do with it but I do not know any other way to point to the current region I need. I do not know in advance how many rows or columns I am starting with but each has the required Row 6.
For x = 1 To Sheets.Count
Sheets(x).Activate
Cells(6, 1).CurrentRegion.Select
Selection.CurrentRegion.Name = "Mydata"
'Loop all columns in sheet
For y = 1 To Range("MyData").End(xlToRight).Column
Cells(5, y).Select
Next y
Next x
View 6 Replies
View Related
Aug 7, 2008
I have two sheets: Sheet1 and Sheet2. I want the Column A in sheet 1 to look exactly like Column A in Sheet 2 so I enter to A1 in Sheet 1 ='Sheet2'!A1 and drag it down. However, when I enter a new row -let's say between row 4 and row 5 - in Sheet2, then A5 in Sheet 1 keeps the value of old A5 (new A6) in sheet2. I, on the other hand, want it to have the value of new A5.
View 2 Replies
View Related
Oct 21, 2013
I do backups on a daily schedule. Given the spreadsheet called "A" which is a list of all clients and current backup policy as of last week, and the file "B" which is a snapshot list of servers in our supported environment, does someone have a clever way to determine which systems are in "B" that are not in "A"? The clients are listed in column M in spreadsheet A and this column may have multiple client names listed due to a policy that includes multiple clients in the netbackup schedule.
View 4 Replies
View Related
