I am trying to loop all columns in each of a number of sheets using current region.
It selects the current region OK but the column counter only shows 1 as the number of columns in any sheet.
The Cells(6,1) likely has something to do with it but I do not know any other way to point to the current region I need. I do not know in advance how many rows or columns I am starting with but each has the required Row 6.
How do I tell a loop command to stop after a certain number of sheets? The code below works for what I want to do but it saves all the sheets in my workbook bar the first one. I just want to save sheets 2, 3 & 4
Code: Option Explicit Sub mysaver() Application.Calculation = xlManual Dim counter As Integer counter = 2 ' counter is for the number of sheets in the workbook Do While counter
I have a small macro that searches the sheets in a workbook and sends the info (if qualifies) to a new workbook before saving that workbook using a name date time format for records.
I woud like this macro to be able to repeat action in 8 more selected workbooks in a folder. Question - can I name the workbooks I want to search - and - can I search all 9 workbooks before the data sheet saves and names itself, limiting access.
I have this very simple code below that I use to delete a row if its marked as 'false' in column M. This works quite well, but I want to expand it. I use this in a workbook that can have name different sheet names in a month, and I want it to automatically go through all the sheets and do this...except for 2 sheets named addressess and sheet1. Is there something I can add to this macro that will loop through all the other sheet names (regardless of name) and execute this?
Sub DelRow() With ActiveSheet .AutoFilterMode = False With Range("m1", Range("m" & Rows.Count).End(xlUp)) .AutoFilter 1, "false" On Error Resume Next .Offset(1).SpecialCells(12).EntireRow.Delete End With .AutoFilterMode = False End With End Sub
Is it possible that a VBA code could loop through some sheets in a workbook and save each one as an individual CSV file. The CSV filename would be the same as the sheet name.
I am trying get a set of code to run through the sheets in the workbook... All sheets EXCEPT 1 named "Summary".
How can I code the proper statement? This is my current Private Sub cmdAddDistribution_Click()
Dim ws As Worksheet Dim lCount As Long Dim rFoundCell As Range
'check for selected cash flow If Trim(Me.cboxCashFlow.Value) = "" Then Me.cboxCashFlow.SetFocus MsgBox "Please select a Cash Flow." Exit Sub End If...............
There are more sheets that this is run on, but I am sure you get the idea. I guess that this can be done using a loop, I would prefer to code the sheet names in, there are 5 in total.
I have a workbook with 180 Sheest. I need to copy sheet name and paste to column Name. In the Column Year write 2013.Finally I need to all sheets as show below in in Sheet Farms. Doing this one by one is time consuming and with error risk. I think a loop can do this,nevertheless, I don't Know how to do it. Column size can be different in each Sheet
Sheet name Famr1 CodNameYearDescTotal1Total2ProvCnt 1234Apples200xxxyyyzzz 3412Bananas400xxxyyyzzz 2358Oranges500xxxyyyzzz 8956Pines800xxxyyyzzz
However it will only add data to the active sheet when i am asking it to loop through the workbook missing out specified sheets. Would anyone be able to look over the code to see where the error is as to why it will not loop through the remaining sheets in the work book.
I am trying to loop a procedure that changes a cell value on 2 sheets in a workbook. I recorded a macro on one workbook and it worked fine. I then tried to modify the macro to loop this on more workbooks that have identical worksheet names. The macro is in a workbook named LIST, which column A has a list of all the workbook names. Currently there are 55 workbooks, but in the future I am sure there will be a few more. Here is a copy of the macro:
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 5/28/2008 by MT ' Dim STATEstr As String Dim a As Long a = Range("C1") For STATEstr = A1 To A55 Workbooks.Open Filename:="C:ALLSTATES" & STATEstr & ".XLS" Sheets("3 ANL").Select Range("A1").Select ActiveCell.FormulaR1C1 = a Sheets("3 ANLV").Select Range("A1").Select ActiveCell.FormulaR1C1 = a ActiveWorkbook.Save ActiveWindow.Close Next STATEstr End Sub The first error I got was a TYPE MISMATCH on 'For STATEstr = A1 To A55'. There may be more things wrong with this looping. The only experience I have with macros is recording them and then modifying and combining them.
Col A: Date Col B through M: Headings are employee names, data is how many hours of vacation per DATE.
User will enter a date in column A, and then the corresponding number of vacation hours a person took that day. There are a dozen or so employees, so we're only entering a record on the dates that someone has taken vacation time. Dates are mm/dd/yyyy format. The hours are number/two decimals.
What I would like:
An update command button (hey, I can actually do that part!) that has an on-click that:
Loops through each column B through M, and copies the information to the employee's individual sheet.
The individual sheets:
Columns are: A = Date of vacation B through M are months Jan through Dec.
Data starts *paste* in cell A12, where the date of the first vacation day they take should appear. If it was a half-day in February, .5 (or .50) will appear in cell A14.
If it's not clear, I'm happy to send the file! If you put your email here, I'll send it right away. If you email me at home, it'll be a few hours before I can send.
No rush on my part.
Really appreciate it!! I'm not a coder. I know small bits and pieces. When you start talking about Dim, I think of chinese food.
_________________ TheWordExpert
[ This Message was edited by: Dreamboat on 2002-04-11 10:20 ]
I need to creat a bunch of sheets and do the same work for each of the sheets. My problem is that I do not know how to refer them by the created name. Here is an example of my codes:
Sub test() Dim I As Integer
For I = 1998 To 2010 Sheets.Add.Name = I Sheets("Number").Activate Range("A1:A3").Select Selection.Copy Sheets(I).Select Range("A1").Select Selection.Paste
Next I
End Sub
The error is "Subscript out of Range". I believe it is because when I refer a sheets(I), (I) does not recognize as the name of the sheet but the number of that sheet, and there is no sheet numbered 1998 or bigger. However, If I refer the sheet as sheets("I"), it can not find the sheet named "I" either.
How should I refer those sheets name so that I can do some work?
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
Notice that there is an empty cell in between.The data starts at C12 up to C21. The data is in Sheet2.There are also 8 more sheets( Sheet3 to Sheet10). I want to rename each sheet, starting from Sheet3 according to each cell. For example the Sheet3 to be renamed to 01, Sheet4 to 02.
What I can do is something like this:
[Code] .....
And repeat this code for every block of data I got by changing everytime the i and the a. But this method is not so optimized because there are cases that the number of rows for each block is not the same and I have to change everytime the i counter. Is there any way to do 1 loop for all the sheets using maybe Worksheets.Count and another dynamic loop for the rows ? The data always start every 6 rows eg( C12, C18 etc). Also I was thinking to define an integer representing the number of rows for the loop...
writing a loop that will perform the same action on 11 worksheets but stop if it gets to a sheet with no data in cell A1. The data in A1 will be text. The code I wrote below below does what I want it to, but I have to run it on each individual sheet.
I have created a macro that loops through and creates an array of the visible sheets. Now I would like for it to print each of those sheets out. I think my main mistake is in my declaration of the array type, since I have not worked with arrays much before.
how to make the following code operable. Currently when I run it I'm getting a "Run-time error (9): Subscript out of range" error.
I am putting in search items and running a macro to find the items on 'physical servers' WS, copying the header in that WS and the entire line the match appears on, though I cannot get it to do this.... it is really causing me stress
Then next part that is working is the items that return false are showing up on the results page - this is expected and what i want it to continue to do.
What I cant seem to work out also is how to run the search on the 'Virtual Server' WS also and return the results to the results WS as just like the 'physical servers' WS.
I have included some dummy data + code + the expected result on the 'Server Results' WS.
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
I'm trying to write a VBA procedure that will loop through all the worksheets within my Excel workbook one by one (the number of worksheets in the workbook may vary from month to month) and count all the non-blank cells in Row 12.
If the number of non-blank cells is anything other than 24, I want the procedure to display an error message. (Each individual sheet in the workbook is supposed to contain 24 column headings, and all the column headings are in Row 12).