I have 2 set of tables:
Table 1
A 123
B 231
C 234
Table 2
A 321
B 585
C 358
How can i make it like using any tools (I presume vlookup can do the trick) as i have thousands of rows to match. Cant do it manually.
A 123 321
B 231 585
C 234 358
I have a feeling to use v lookup, but not sure how to use it.
how to join two tables which their relationship is one column in A table inclue another column in B table.
for example:
Table A:
ColumnA1
ColumnA2
Table B:
ColumnB1
ColumnB2
I want to join Table A and Table B, and the where clause should be A.ColumnA1 include B.ColumnB1.
Like the value of A.ColumnA1 is "Abc1234 test", and the value of B.ColumnB1 is "1234", and then we can join the TableA and Table B
We have approximately 100 rows x 200 columns of data and would like to combine the contents into one row. Is this possible without copying and pasting many times.
eg
1 abc dek jui kol
2 ppo adf asd dfa
into one row
1 abc dek jui kol ppo adf asd dfa
I want to take a cell with a persons first name and a cell with their last name and combine into one.
EX.
What I have.
A1 B1
John Smith
Walt Smith
What I want.
A1
John Smith
Walt Smith
I wish to join few columns from two data sheets using Macro function.
Sample
Sheet 1:
A B C D E
1 Headline Msg1 Msg2 Msg3 Msg4
2 Car Post Join Help AAA
Sheet 2:
A B C D E
1 SumNo Msg1 Msg2 Msg3 Msg4
2 CM001 Join Help AAA BBB
Output;
A B C D E F
1 Headline SumNo Msg1 Msg2 Msg3 Msg4
2 Car Post Join Help AAA
3 CM001 Join Help AAA BBB
Within 1 workbook, I have two worksheets:
Worksheet1: (multiple entries per individual)
A
B
C
D
unique ID
Name
Start date
Salary
123
Rose
12/01/2005
35,000
[code].....
Worksheet 2: (single entry per individual)
A
B
C
D
unique ID
Date of Birth
Benefit Plan
Termination date
123
12/01/1975
A
12/01/2006
[code].....
I am looking for a formula that will allow me to marry up the data sets by unique ID. I want to take the single lines from worksheet 2, and pull them over to sheet 1 and replicate where the identifier matches. So, Worksheet 1, would end up w/ columns E F G H, and additional data for each individual.
Unique ID, Name, Start Date, Salary, Unique ID, Date of Birth, Benefit Plan, Termination Date.
123
123
I am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
I have a table of data which represents data in different categories by week.
My ultimate goal is to have another table representing the data for each month - for instance - for each of the categories the data for :
06/04/2009
13/04/2009
20/04/2009
27/04/2009
is summed to make the data for the month of April.
The way I'm doing this at the moment is very long-winded
I'm using a whole new table - the size of the original weekly one - for each month. A calculation decides whether to effectively leave a cell blank or insert the appropriate data based on a date being within a particular range.
So in each "month table" there is the same list of week values:
06/04/2009
13/04/2009
20/04/2009
27/04/2009
04/05/2009
11/05/2009
etc.
but for each "month table" only the cells adjacent to the dates within the relevant month will return actual numerical values within them
This is an example of the forumula I am using in these tables:
=IF(AND(($AD7>=MIN($AE$5,$AE$6)),$AD7<=MAX($AE$5,$AE$6)),$C7,"NA()")
Then a master table sums the totals for each month.
I want to be able to keep this table but get rid of the ones for every month as the sheet is getting unwieldy!
I have tried several times to attach the sheet for clarity but each time upon trying to "Submit New Thread " I am getting page not found errors - the sheet is only 133KB and I have tried zipping and sending also - I can't make it any smaller.
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies View RelatedI would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies View RelatedI have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies View RelatedI have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
i have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?
View 3 Replies View RelatedI'm writing an Excel Macro and want to sum a number cell with the value "45667" and a text cell with the value "Prague" and return it to a new cell with the value " 45667 Prague"
I've done it successfully with the two text cells "John" and "Hopkins" to "John Hopkins".
This is my
Sub SumCells()
Dim FirstName, SecondName, Zipcode, City, fullname, fulladdres, space
FirstName = range("cell1").value
SecondName = range("cell2").value
Zipcode = range("cell3").value
City = range("cell4").value
space = " "
fullname = firstname + space + secondname
fulladdress = zipcode + space + city
The problem is that city is recognized as "Prague", and the zipcode as 45667 (without the "")
I have an requirement that retrieving the data from two different data bases. I want to compare those two and prepare a report using VBA. I am able to get the data to excel separately, but now I need to join these two sets based on the key columns
View 2 Replies View RelatedI have a list containing hundreds of rows and I need to join the cells in different columns.
Eg. Col A, Row 1 is "Red Maple"
Col B, Row 1 is "Acer Rubrum"
Col C, Row 1 is "60mm"
I need to join the row into one cell reading "Red Maple Acer Rubrum 60mm"
Column A2:A100 contains part description various len lengths max is 50 min is 22.
Column B2:B100 contains scrap qtys.
In column C2:C100 in need to join the text in A and B.
i want the scrap qty's all to be alligned i.e level, as column C is shown in a userformlist box.
meaning joining text/values would look like this (ignore full stops)
dispenser calsberg .........70
tap beer......................... 80
cowl................................100
instead of
dispenser calsberg 70
tap beer 80
cowl 100
I have a long OR function that I'm working on. The logicals for this change the search value from 1 to 9. Here is one of the logicals:
sumproduct(--isnumber(search(1,???)))=0
I need the "???" to be the arrays. The most complex of these will be: A1:C1&a2&c2&a3:c3 or is it
A1:c1,a2,c2,a3:c3 or perhaps another join method like
concatinate(a1:a3,a2,c2,a3:c3)
How do you join arrays to get the right result?
Cells E39:E53 are conditionally formatted to fill red if cell $AB$13=the cell 3 to its left .. eg: cell E39 would fill red if cell B39 (the cell 3 to the left of E39) is equal to cell $AB$13
Only one cell in the range will meet the condition at any time.
I also have the same range conditionally formatted to fill black if cell $AF$13=the cell 3 to its left .. eg: cell E39 would fill black if cell B39 (the cell 3 to the left of E39) is equal to cell $AF$13
Ranges F39:F53, and G39:G53, H39:H53 etc etc etc (all the way up to X39:X53) are all conditionally formatted the same way.
What I would like is for the cell that fills red in the first range to have a line connecting it to the cell that fills red in the second range, etc etc etc.
And the same for the cells that fill black.
Creating a chart from my data is not an option for other reasons, so I'd like to explore this possibility.
I'm dealing with 4 columns. Column A is a list of names. Column C is also a list of names, each with a number beside it in Column D (i.e "John Smith" in cell C1 with "10" beside it in cell D1). I need a formula that can search the list of names in Column A for the matching "John Smith", then put the corresponding number ("10") beside his name in Column B. Meaning...if the search finds the matching "John Smith" in cell A6, I need the formula to copy "10" to cell B6.
View 2 Replies View RelatedI am trying to change the value in a cell by referenceing it to another sheet. My cell is: Today it is 33F, have a nice day. Now, 33F should be called from another cell and should be inserted in this new cell. If I change the 33F in the other cell this change should be reflected in my text file.
View 3 Replies View RelatedI have a multipage control on a userform. On Page 8 of that multipage, I have label1, part of that label is modified by other parts of the program. This is done by the program writing to a sheet of Data and then the program pulls that info into this label. My question is,what is the correct format to populate the label?
see below: This is what I have in my Userform_Activate and Userform_Initialize subs:
CurrentVersion = Sheets("Data"). Range("N2").Value
Label1.Caption = "This will allow you to change the Caption of the UserForms through out the operational program. Some UserForms cannot be changed. The ending of" + Chr(32) + Chr(34) + "Automatic 2005 V" + Chr(32) + CurrentVersion + Chr(34) + Chr(32) + " will be added to what you enter below as default."
CurrentVersion is pulled off of the datasheet which is a number like 5.9.8.2. however it errors "Run time error 13 - type mismatch" I can only suspect the label1.Caption needs something like: Multipage8.label1.caption =
I have a column with numbers in each cell. I need to add the same three letters before each of the numbers. Example:
number in cell: 25067 I need it: ABC25067
I did a macro for it but had to do each one individually. I imagine there is a simple formula to do this automatically but I don't know enough to figure it out (despite reading up on it for the last hour!)