I have multiple data tables in one sheet...and each one has a chart...in that sheet. To better allow the viewer to coordinate quickly which data table corresponds to which cart...i want a line between them. Excel already has the draw line function, but if you move the chart around, the line doesn't move.
View 2 Replies
I have a table and I need it to filter on the basis of a value entered in a different cell - but i want it to show all rows greater than and equal to that specific value.
Sub Testmacro()
filtercriteria = Range("H3").Value
Sheets("Report 1").ListObjects("Table1").Range.AutoFilter _
Field:=4, Criteria1:=">=filtercriteria"
End Sub
I'm trying as below:
If F3 contains specific word i.e. FCL then only cell K3 and L3 are unlocked or available for data input.
Additional information:
F3:F10002 contain data validation list
I need to apply above condition on K3:K10002 and L3:L10002
I did some search on this forum and I came to know above can only achieve through VBA only. Is there is any possible way without VBA? I'm not good with VBA etc
The spreadsheet is password protected. The only cells that students can enter values into are the answer cells.
I am trying to figure out how to have a cell switch to being locked if the correct answer is inputted. ( I have a column that I hide that has the correct answers in it. Then I use a countif function to determine if the answer cell equals the inputted answer.)
I have created a spreadsheet that will be viewed/used by various users (read only as I have protected the sheet except from three fields), although I would like to give them the ability to copy the contents of a specific cell that is protected.
I have tried to give them the ability to select the locked cells and then copy, but that means that the formulae in the cell is copied as well.
how I can let people copy a locked cell without the formulae?
I have worksheet that contain values in column E and G and the total in column K. E and G are unlocked for manual input and column K contains the formula for the total and is locked. From time to time a certain row will not be applicable and before I started locking the cells in column K i would just put "not applicable". Now that it's lock I can't do that. My only option now is to put O in column E and G but I would rather put "not applicable" in column K. Is there a way around this. I was thinking of something along the line of a macro that would unlock the worksheet input the text and re lock it. The macro would have to lunch when a locked cell is selected or have a button that would launch the macro an would prompt for which cell the text would be entered. Is this possible.
View 7 Replies View RelatedI have created a simple excel document with
Sub randomnumbers()
Range("B1").Formula = "=randbetween(1,100)"
Range("B1").Value = Range("B1").Value
End Sub
There is a button that i click and it creates a random number to cell 'B1'. it works fine, but i need to lock the document so that the user can only access one cell... 'A1' when i lock the document, and i click the button, it gives me a '400' error. i think it is because the button points to a locked cell.
I have programmed a Form in VBA that initializes by clicking a button on a worksheet. The Form features combo boxes, text fields, and a couple option buttons. Once completed, the Form enters the values entered by the user (as strings) in contiguous colums in a single row. The worksheet is locked so as to not allow users to input values into the worksheet directly and bypass the Form.
The question:
Once a row is filled by submitting the Form, i want to allow a click event on that cell (like double-clicking, for example) to pop-up the Form, but containing the corresponding values from the cells in the matching combo boxes, text fields, option buttons. I want to do this so that I can allow modification on a row without letting the worksheet be modifyable without passing through the Form. Here's the code for submitting the Form values into the worksheet:
Private Sub cmdSubmit_Click()
ActiveWorkbook.Sheets("ALTEC Growth Report").Activate
Range("A7").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = Trim$(txtName.Value)
ActiveCell.Offset(0, 1) = cboCC.Value
ActiveCell.Offset(0, 2) = cboProdServ.Value
ActiveCell.Offset(0, 3) = cboStatus.Value ..................
Is there any way to change the pattern color of a cell (or a group of non-adjacent cells), say from No Color into Red if the cell(s) protection is locked (or unlocked)? Seems to me that the Conditional Formatting cannot work this way.
View 3 Replies View RelatedI have one issue with my protected worksheet. Some locked cell contents are linked to cell contents located in another sheet. When I double clicked on these cells, a warning window poped up but also opened the sheet in which the corresponding cell is located. This is quite annoying to have to go back to the former sheet. How can I prevent it ?
View 3 Replies View RelatedWhat I'm trying to do has been done before, However, all of the Code i am seeing online is not working for me...so maybe i'm missing something
I want a range of cells to remain locked unless SCP is entered. I need this done for four different selections (SCP, SD, MM, PP)
So if SCP is entered, then a certain range of cells remains locked, If SD is entered then another range of cells remains locked, so on and so forth for the 4 selections.
This was what I was working with.... However, i am not sure if i need to protect or unprotect the spreadsheet before i run the macro, also am i supposed to leave all cells locked or unlocked?
Private Sub Worksheet_Change(ByVal Target As Range)
If [B3] = "SCP" Then
ActiveSheet.Unprotect ("PASSWORD")
[Code].....
I have created a workbook of 12 monthly worksheets, with an index page with hyperlinks to each worksheet. There is also a hyperlink on each worksheet to return to index page. Each worksheet is protected, but the cells which users can enter information are not locked. The protected worksheets have the 'select locked cells' unticked.
I have found that an inadvertant click on any of the protected cells in the worksheet will take users back to the index page. This is very annoying, what have I done wrong? The hyperlink is one of the unlocked cells.
We have Microsoft Excel 2000 and i have locked all worksheets separately. I have enabled Data Validation on a range of cells and enabled a list box. The way the workbook works is you log in with a name, the cell range references the names in each cell to another cell which was your login name. Those that match, after clicking a button will unlock those specified cells.
Then users can use the data validation listbox function to select only their name from the cell that was linked to the log in name box. (the users name that logged in only shows in the list). The problem is, all cells by default are locked in the range with the names in. You cannot delete the values in any other way, unless you unlock the cells. (at least thats what is supposed to happen)
My question is:
Is there any code anybody knows that i can use to make excel copy what excel 2003 does, im sure that the problem is a fault with excel 2000 and microsoft fixed it when they released excel 2003.
I have locked some cells on my Spreadsheet so other people can not change them. What I would like to know is how do I change the colour of the font? I also would like to Bold/unbold the font.
View 6 Replies View RelatedI have a workbook with multiple sheets interacting with one another. On one of them the user is prompted to make lists of expenses in multiple columns. The column labels are in row one, and row two has the sums of all the cells below. I have every sheet in the workbook protected, so that only the cells that need to be modified are unlocked. The problem is that the user can drag cells around and change the range of the functions in row two (locked cells).
For example, A2 has the function =sum(A3:A100). But if the user drags the values in A3:A5 to A6:A8, the formula in A2 changes to =sum(A6:A100). Is there anyway that I can allow the user to drag cells (this could be a useful feature), but keep the formulas in the second row fixed?
I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies View RelatedI'm trying to make a spreadsheet more secure to prevent unintentional changes.
What i'm looking to do is to lock all cells so no changescan be made unless the user clicks column A.
Column A should remain unlocked and when the user clicks it i would like the entire row unlocked for editing (but only after column A is clicked)
I will run a macro to lock the entire sheet again once the sheet closes.
I need to unlock and lock certain cells when other cells have data entered.
I also need to enforce in the unlocked cells a minimum value.
In my worksheet i have the below requirement
Initially Cells C6 and 7 are unlocked and Cells C5, 8 and 9 are locked
1. Cell C6 must have a value entered greater than or equal to 50, when this value is entered I need to unlock cells C5 and C9 and lock cell C7
2. Cell C7 must have a value entered greater than or equal to 50, when this value is entered I need to unlock cells C5 and C8 and lock cell C6
I also need to unlock cells C15 and 16 when C13 has "Yes" selected in the drop down menu.
I just realized that some of my comments on a worksheet are being cut off or not viewable. By Default the Comment is displayed to the Right of its cell. I have a Scroll Lock to prevent users from scrolling off the work area. Some of the comments are being displayed past this scroll area and the user is unable to read the comments as they are being cut off or being displayed beyond the scroll area.
Is there anyway to reposition or set the area that these comments are displayed? For Example, to the Left of the cell so that they are able to be viewed. The Workbook is Protected and the Cells with comments are locked so the user won't be able to click on the cell. I found 2 Codes that would work if the user could either click on the cell or if the comment always visible(they are not)
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim cTop As Long
Dim cWidth As Long
Dim cmt As Comment
Dim sh As Shape
Application.DisplayCommentIndicator _
= xlCommentIndicatorOnly
Set rng = ActiveWindow.VisibleRange
cTop = rng.Top + rng.Height / 2 ................
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
With the attached spreadsheet i cannot workout how with the line graph not to continue the line if there is nothing in row 10 of the table.
for eaxmple if there is no value in cell M10, i would like the actual addtion line to stop at the last value on the graph that was in L10.
I have a master spreadsheet that houses most of the information that remains in my control, and several other user spreadsheets that update cells from that master through links.
I am having some problems lately with users doubleclicking the locked linked cells in their workbooks, and excel then wanting to open and give the user access to my master spreadsheet. Is there a way to disable this feature? I would like it to not even acknowledge the action if that's even possible because it confuses them as to why they are getting a prompt to open another document.
I need to remove a blank first line from a cell, attached two cells photo. Something with replace "chr(13)" or "chr(10)".
View 6 Replies View RelatedI want a VBA function to fire "ONLY" when a cell is changed.Peramiters:
Data ertry range is full, Last cell in SubTotals range has changed from $0.00 to anything >, Last 3 cells are Locked, Protected and Unselectable Attached is a copy of the work book. I have posted on VBA Express and we have tried to solve this problem, We have come a long way. You might want to read the history link above.
I have a line of numbers in one cell (B2). They look like this;
1, 21, 21, 94, 64, 2, 213
These numbers are currently in Decimal format (more on that later).
I need to "split" these numbers into individual cells and drop the comma. It would look like this;
B3 B4 B5 B6 B7 B8 B9
1 21 21 94 64 2 213
I know I can use the "text to column" function but I was hoping for a VB script to do this.
The second part is I then need to convert the numbers from decimal to Hex and add a "0" to the front of any single digit numbers.
I can do this part using standard excel formulas with no problems but if it could be added to the script then that would be great.
The final thing needs to look like this;
B3 B4 B5 B6 B7 B8 B9
01 15 15 5E 40 02 D5
I have seen so many examples online but none of them give the way to look for a value that I will input on a pop box.
In other words the macro will ask user for what value to look for. Once input then macro will run and delete row if value found if value is not found then return error and stop macro.
I am trying to stack the values of a chart into a single column.So my data looks like this:
-------A--------B
1 Value1 Value2
2 Value3
3 Value4
4 Value5 Value6
5 Value7
If cell 1B does not = 0 I want to add a line between line 1 and 2 (I'll call that line "11") and take Value2 and paste it into 11A If cell 1B is blank I want it to do nothing
So I want my data to look like this:
---------A
1....Value1
11..Value2
2....Value3
3....Value4
4....Value5
41..Value6
5....Value7
I want to automate this as much as possible but if it's not easy to do I at least want to at least automatically add a blank row below if value does not = 0 and then I can manually move the values as needed.
I would like to select File/Send to/Main Recipient (As Attachment) within my Excel Spreadsheet. Within the email, I would like the subject line to be automatically filled in with an entered value of a cell block from within the spreadsheet.
For Example, If cell block A1 had Thursday entered in the cell. Then once I chose send to/Mail Recipient, The subject line would read Thursday.
I have a row of data. I want to merge it all into the first cell and have a line break between each line (from each of the cells).
View 13 Replies View RelatedI'm dealing with an Excel file with many cells and line-breaks. I'd like to have a count next to each cell with the total line-breaks in it.
Example:
A1_trial_____3
___trial
___trial
B1_trial_____1
C1_trial_____2
___trial
Do you know which formula I should put in the cell for counting the line-breaks?
