I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
I have a pivot table with the following items;
Report Filter = Project Names & Dates (filtered on 2 fields)
then the pivot table of data shows
Dept, Sum of Hours, Sum of Total ($), Sum of Days
When you click on the drop down to adjust the filter for the Date it gives you the whole list of dates, day by day as it is in the source data.
Is there a way to make it in the filter by month and year, the way it would in an ordinary filter. So if I wanted to have the pivot table show only the values with an October date I can, rather than having to deselect all and then individually check the boxes for the 1st through to the 31st of October.?
I am looking for a way in VB to select and unselect items in the list for filters generated in a pivot table.item list. Ho do I do that?
View 5 Replies View RelatedIs it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.
View 2 Replies View RelatedUsing Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
I'm trying to write a macro to select the multiple sets of the same data for several PIVOT tables. I've tried Slicers but it seems that this takes up too much processing power and always times out.
My workaround is to do a macro that picks out the said data, however when i do the below, plus another 4-500 lines i get told that there are too many line continuations
Code:
ActiveSheet.PivotTables("PivotTable6").PivotFields( _
"[Postal District].[Postal District].[Postal District]").VisibleItemsList = _
Array("[Postal District].[Postal District].&[AB11]", _
"[Postal District].[Postal District].&[AB12]", _
[Code] ...
What I'm looking to do is express all the postcodes in one line or at least multiple post codes in one go, this is what I've tried:
Code:
"[Postal District].[Postal District].&[AB12].&[AB13]"
and
Code:
"[Postal District].[Postal District].&[AB12,AB13]"
But to no avail.
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
So I was wondering if it were possible to completely lock a pivot table, almost like protecting the sheet, but to allow the report filter field at the top of the table to be used. So what I'm trying to show is our net rev accounts in the rows & quantity and amounts as the value all fixed and unable to move about or drill down; but then have our product titles at the top in the report filter which you can still use to be able to select specific products.
I understand that I could make a big old page of drop down lists and vlookups and sumifs etc etc, but surely the above would be way quicker, plus I wouldnt have to bother checking it all works regularly!
I'm currently running this macro, which nearly does the job, but the data and row labels are still able to be manipulated. So... changing the macro, or doing something completely different?
Sub KillPivot()
Dim pf As PivotField
With ActiveSheet.PivotTables(1)
[Code]....
I have a pivot table created from a data table with three columns: Date, Sales, and Customers. I have the Date column in the Report Filter and I want to change the date based upon a value in a cell range named Date, of all things. The pivot table is located in another worksheet and the range Date is changed by a spin button in the active worksheet.
My code is:
Sub ptDate()
Dim pt As PivotTable
Set pt = Worksheets("Pivot Tables").PivotTables("PivotTable1")
pt.PivotFields("Date").ClearAllFilters
pt.PivotFields("Date").CurrentPage = Range("Date")
End Sub
I was wondering if it is possible to create a custom pivot table report filter? I would like to take an existing pivot table report filter and manually add values into it. I would like to do this because I have multiple pivot tables, some with the same values and some with different values and I have a VBA code from Contextures that applies a mass filter to all fields with the same name. So if i could manually add values into one report filter, I could filter from one location and have all my pivot tables update at the same time if they contain the value that i would like to filter by.
View 1 Replies View RelatedI've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using combobox on userform.
Sample Data
ID
NAME, INIT
GENDER
DEPT
SALARY
DOH
LOCATION
RAISE
1
Smith, J.
F
Sales
$41,250.00
2/2/1982
Boston
$45,375.00
[Code] .....
VB:
Sub CreatePivot()
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("Employees Data").Select
Range("A1").Select
[Code] .....
Error:
Private Sub ComboBox1_Change()
ComboBox1.Value = objTable.PivotFields("DOH")
End Sub
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
View 2 Replies View RelatedI have an issue with a Pivot table: I am using the 'show report filter pages' function and prior to this I have ensured my character length of that field is equal or less than 31 however when I hit the function the tab names are shortened to 26.
View 1 Replies View RelatedI am trying to use the bellow code to set one pivot item (MyItem) to true and the rest to false... unsuccesfully
Code:
For Each pt In Sheets("Schedule Dashboard").PivotTables(PivotTable1)
If pt.PivotFields("District").PivotItems(MyItem).Visible = False Then
pt.PivotFields("District").PivotItems(MyItem).Visible = True
Else
pt.PivotFields("District").PivotItems.Visible = False
End If
Next pt
Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
Below is a simplified/truncated version of a data set that I am using in a pivot table:
Client Asset Return
1 Port1 10%
1 Port2 12%
1 Port3 11%
1 Port4 13%
1 Port5 10%
[Code] .....
I have created a pivot table and I'm using report filters for both Client and Asset (obviously there are a lot more data points). When I filter on Client 1 I would expect to only see Port 1 - Port 7 available in the Asset filter however, I see every asset in the data set. I need to pick and choose using the Select Multiple Items check box without having to scroll through every single asset. Is there a way to easily do this?
I have created a DAta Validation List and it only select one item. I want it to select as many items that is on the list but i can't get it to work for my main worksheet I am working on. I can't figure out why I can't get it to work for the work sheet "This Don't" but it works for the worksheet "This Works" why and how I can change it so both Reason (Column F and H can) select mutliple items on there. Data Sheet.xlsx
View 2 Replies View RelatedI watched a video on youtbe. And the women had three or four items in drop down box. She was using vba. When i emailed her to ask her how she did this, she kept telling me to go to her website and i was supose to figure it out on my own. I am trying to do a start up construction company. the link to her site is as follows Select Multiple Items from Excel Data Validation List - YouTube the idea of what i want to do, is how she clicks on a word and it follows in the coloumn to the right going down. This is what i need to know how to do. It is probably pretty elementary to many of you. But i build, i know how to read prints, to cut footprints for new homes etc. But when it comes to excel i am so green.
View 2 Replies View RelatedI have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
View 9 Replies View RelatedI am trying to automate creation of pivot table, where the first three fields will go into the RowLabel field, and the rest of them will go into the values as "Sum of ____".
Is it possible? Because I could do it one by one; however, those fields are different every time (there are different number of those fields, and their values are also different).
I'm on Mac using Excel 2011. This means I don't have "slicers", which is all my Googling kept turning up.
I have a pivot table with 4 different value columns, and I want to be able to filter it the same way you would a normal table - i.e. remove everything below a specific number in one column, and filter for only specific strings in another column, etc.
i have a pivot table report filter that i cannot sort a-z. i've tried sorting the source data and also right clicking on the first value then choosing display a-z - neither work.
View 5 Replies View RelatedHave been going round and round on this! I have a set of data that shows sales dollars by weeks. Currently, that data is in a Pivot table. I'd like to have a macro that selects the weeks (1-52) based on my input. For example. If I want to see weeks 5-52, I want to be able to input "5-52" somewhere and have a macro run that will select weeks 5-52 in the pivot table instead of having to go in and manually select each.
View 1 Replies View RelatedIs there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I have a pivot table that I want to update via VBA based on dates user inputs on an input tab. (Want to use the Between function)
The Date field is in the Report Filter section (as I don't want it in the row or column area), but when I click on the dropdown arrow, I don't get any option to filter the date at all. I've double checked that the dates in my datasource are formatted for a pivot table, but that doesn't seem to be the issue.
When I use code I've found on this and other sites, it also doesn't work. When I run it, I get the following error at the "If Date DateValue(PI.Name) < StartDate Or DateValue(PI.Name) > EndDate Then..." line
Error Message: Unable to set the Visable Property of the Pivot Item Class
Code:
Sub Test()
Const StartDate As Date = #1/15/2013#
Const EndDate As Date = #2/13/2013#
[Code]....