I'm on Mac using Excel 2011. This means I don't have "slicers", which is all my Googling kept turning up.
I have a pivot table with 4 different value columns, and I want to be able to filter it the same way you would a normal table - i.e. remove everything below a specific number in one column, and filter for only specific strings in another column, etc.
I have a pivot table which has a report filter. The report filter can have anywhere from 20 to 350 values. The user will be able to select multiple values from the listing to produce the table as needed. I would like to be able to display what values were selected in the report filter so that the user can see this information once the pivot table is rendered. Is there any way to display this information either above below or along side of the table itself?
I am using Excel 2011 for Mac, but I also have access to Excel 2011 for Windows. Either way will work. I have been able to get quite a bit of what works on Windows to work with the Mac.
I have looked and experimented on how to include multiple ranges on a pivot table in excel 2011, i have found how to to it with the wizard but i can not find the wizard.
How to separate the ranges in the selection box? They are going to be going across sheet is that makes any difference.
Is there is some way to filter based on the value in a specific subcolumn.
Using the example of a list of salespeople and their transactions over the year, who sell multiple products, the PT is Sales Person name for the Row Labels, and Type of Product for the columns. The resulting PT has 3 columns, for each of the products - e.g. table, chair couch, and the Values are the total number of that item sold. Is there any way I can filter, so that I will see only those sales people who have sold 3 tables or more lets say. (Thus enabling me to quickly see what other products those sales people have sold.)
(The actual situation is a lot more data heavy than that - it is actually a list of donations for a non-profit, coming in from hundreds of people, across a dozen different categories; I am trying to analyse the extent to which people who gave for a particular category (Direct Mail solicitation) also gave across other categories.
So far I've manipulated things by inserting a '% of row total' value into the PT and then using countif/sumif functions outside of the PT to figure out how many people donated solely to this category (= 100% of row total), and how many donated to other categories too (= more than 0% of row total, less than 100%), which gives me a decent summary of sole donations to this cause vs other categories too, but doesn't visualise what the actual other categories donated to were. I've also investigated making a PT of the existing PT, but I'm not sure if that's even possible...)
(I'm using Excel 2011 for Mac, but if there's some other version that would make this possible, I may be able to use another computer.)
In Excel 2007 is it possible to filter the "Values" in a Pivot Table?
I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.
for example:
Row Labels Sum of Gross Wt. - Lbs
10003150588929
10003153258700
10003155984958
1000315651530
10003156549761
I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.
Named my data range using this formula:
=OFFSET(Sheet1!$A$1,0,0,COUNTA(Sheet1!$A:$A),COUNTA(Sheet1!$1:$1))
I was hoping that my pivot table would refresh with the new data that I added on sheet 1 but it is not working and yes I have refreshed my pivot table. The new data is not capturing.
Is this the correct formula for Mac Excel 2011?
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
View 9 Replies View RelatedI have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
View 9 Replies View RelatedI have created a pivot table in Excel 2010 that lists amounts used of particular items each month. Inside the pivot table value field settings i have changed the show values as field so that it displays the difference in usage from this month to last.
However if i now select a top 10 filter it only filters by the total number used as opposed to the difference in usage from one month to the next (which is the values displayed).
Is there a way that i can filter by top 10 by the actual values displayed in the pivot chart and not just the underlying data that creates it?
I have a pivot table like the one below.
What I would like to do is filter the drill down keeping the total of the products (in bold) and showing just one of the name (just ENTA for Example).
Basically I would like to add a filter that Hide some of the data keeping the row total.
I'm Using Excel 2013.
Products
Sell out 4 weeks
Stock Units
Avg 4 weeks
Wks of stock
3160-24PC-AP12
1
[code].....
I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
In Excel 2010; the pivot Tables drop down filter is limited to 10,000 records. if more than 10,000 are available then a message saying "Not all items showing" is displayed at the bottom of the list.
Clickin on the message would display a window saying: "This field has more than 10,000 items under one or more parent items. Only the first 10,000 items are displayed under each parent item."
In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
I was wondering if it were at all possible to add multiple columns to the values portion of a pivot table at once, instead of individually dragging. When you click on them, it auto-sends them to Row Labels, which I don't want. I have a bunch of colums I want to add to Values and don't want to waste a bunch of time dragging them individually.
View 2 Replies View RelatedIs there a way to drill down the data of 100 values in a pivot table into one worksheet without resorting to drilling down each value, having 100 worksheets for each value, to paste into one worksheet? I got my company to give me an experimental computer to test for this in 2007, though if there is a way to do this in 2003,
View 4 Replies View RelatedI have a Pivot Table with pivot fields and data. I would like, through VBA, to get the list of values that can be chosen from a given pivot field.
For example, a list would be Product1 / Product2 / Product3 .... I would like to read that list and put it into a drop down list in a form.
GOAL: I have several Pivot tables on the same sheet with similar fields and I want through macro to allow the user to update them all with one click.
I have some nominal data that I'd like to get into a pivot table (Excel 2013). For simplicity let's say it's a one-question survey with 6 respondents:
Q1: Dogs are better than Cats
Strongly Agree
Agree
Neither Agree or Disagree
Disagree
Strongly Disagree
Responses:
Agree
Strongly Agree
Strongly Agree
Strongly Agree
Agree
Strongly Agree
I can create a pivot table with this data and get the following:
Row Labels
Count of Q1
Strongly Agree
4
Agree
2
Grand Total
6
This all works nicely, however I require that the other options ("Neither Agree or Disagree", "Disagree", and "Strongly Disagree") be present, even if their values are 0, like the following:
Row Labels
Count of Q1
Strongly Agree
4
Agree
2
Neither Agree or Disagree
0
Disagree
0
Strongly Disagree
0
Grand Total
6
What I tried doing was adding a new column and calling it something like Ratings with the following:
Ratings
Strongly Agree
Agree
Neither Agree or Disagree
Disagree
Strongly Disagree
Then I set the Ratings column in the "Rows" section of the pivot table and the Count of Q1 column in the Values section. This is what happened:
Row Labels
Count of Q1
Strongly Agree
1
Agree
1
Neither Agree or Disagree
1
Disagree
1
Strongly Disagree
1
Grand Total
6
I have data set up like the example but then for 1797 lines.
D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo
[code].....
What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3
I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.
When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?
How do count unique values in category in pivot table. (my table, im taking data from ms query). I am using excel 2010
Pivot table example: the result i want is the "no of types" as my data only show "category" and "types".
Category
Types
No of Types
Fruits
Apple
Pear
Orange
3
Vegetable
Cabbage
1
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedI am trying to automate creation of pivot table, where the first three fields will go into the RowLabel field, and the rest of them will go into the values as "Sum of ____".
Is it possible? Because I could do it one by one; however, those fields are different every time (there are different number of those fields, and their values are also different).
I am working on a spreadsheet for my Building company. I'm building a tool to price for Fascia, Soffits and Cladding.
I'm using Macbook Pro Microsoft Office for Mac 2011
Please see attached file
The first sheet holds all the lists of products, Category Headings list is in column A and then all the relevant products and prices are then from B to BI. I have defined each category with a name by selecting the cells and entering a name in the name box.
The second sheet is a Calculator in which I would like a to have a drop down list in the Category Column (Which I have worked out how to do myself - good old google) and then a drop down list in the second column which lets the user select from a list of results based on the selection from the previous column.
Example:
Category(B3) - 18mm Fascia/Replacement Board (Square White) - Drop down menu taken from sheet 1 A3:A33
Description (C3) - Drop down list containing all the options from D2:D15 Named "FasciaReplacementBoard18mmWhite"
So basically, whatever the user selects in Column B (from the category list) a drop down list would be available in Column C
The Value column would then show a value based on the options selected.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies View Related