I am trying to rename a text box, but it doesn't let me. The naming convention is fine, as it works with others. But it thinks that name is taken or something. So how can I see the names of all objects on a sheet?
View 9 RepliesI have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
I need to compare two lists of client names. One list has 59k names to be compared to second list of 1000 names.
The list of 59k are listed in column D and the other list is in Column E. I tried conditional formatting but unfortunately some of the names are slightly different I.e. fair point communications vs fair point communications inc. I was trying to put in v lookup with a trim function but it didn't seem to be working.
I have a userform with 10 rows of data with 8 colums in each row... I am trying to figure out how to dynamically address the object names (ie Textboxes).
Short and simply let's say I have 10 Text boxes named textbox1, textbox2, textbox3, etc
I want to address them in a loop as follows
Private Sub Clear_Fields()
Dim field As Object
For x = 1 To 10
field = "textbox" & LTrim(Str(x))
field.Value = "1"
Next x
End Sub
Obviously I'm missing something here as I get the error Object Variable or With Block Variable not set
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedIs it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies View RelatedI'm trying to sort out a list of names from a website that publishes names in the following format:
DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel
What I'd like to do is get the names in the following format
John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez
Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.
I found the following function, here: [URL] ...
but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.
create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?
The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.
I need to create a function that selects 4 names randomly from a list of 15 names and displays the 4 randomly selected names in the one cell. Also, you cannot repeat the same name in that cell, (i.e. bob cannot be selected twice in his group of four)
View 1 Replies View RelatedI'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies View RelatedI do not have any code for this as I am unsure if it is possible. I have a list of range names in a column (A) that refer to different sheets and in an adjacent column (B) I have a list of data. Is it possible to write VBA code that will allow me to copy each value in column B to the corresponding cell in the workbook that relates to the range name in column A.
View 2 Replies View RelatedI have some spreadsheets that rely on data being pulled in from external querys (from an SQL database).
the below line of code is part of a Workbook_Open() sub, which refreshes the data.
Selection.QueryTable.Refresh BackgroundQuery:=False
I have just got my hands on acopy of Excel 2007 (Yes!!!), but when i open my sheets my code now fails
Ater some messing around Ihave found that if I add ListObject" as below, it now works.
Selection.ListObject.QueryTable.Refresh BackgroundQuery:=False
trouble is it doesn't work for the rest of the office, who didn't get Excel 2007
is it possible for me to have this so that it works for both flavours of Excel?
I have an excel sheet with 30 names in column A and I'm asked to do the following:
Write a procedure – a sub – that uses an input box to ask for a name. The procedure should then scan through the names in the list to search for the name and make a message box to state “X is not in the group” or “X is in the group”, where X is the name from the input box. HINT: You can make a variable “found” that starts with the value 0 and gets the value 1 if the name is found in the list.
Im still pretty new toi VBA and im struggling with pulling data from another worksheet and placing it into a list. Below is the code currently I think I have identified were its not working but not sure what to do. the code should essentially do the following
on opening the workbook check CS PS data worksheet find the names of people within the sheet, These start at row six and the step between each is 82 it then should input these names one after another in the following range Range("AO3:AO43") one name per cell until the end of the dat,a it seems to run but only inputs the first name in the first cell even thought it picks up each name in the myformula piece
Within the myformula there is a concatenate piece to flip the names to opposite way round I think this is where is not working possibly something to do with the separators? each name is in the format surname, firstname it should flip it so it shows first name [space] last name
provide ive commented out the piece I think is the issue
Sub CSupdate_()
With Application
.Calculation = xlManual
.ScreenUpdating = False
[Code]...
In my example you will see my name list that changes with a array to data validation. Seems like you can find ways around things most of the time but this time
View 4 Replies View RelatedI need the sum of a column in a table. In the sheet I am using "=SUBTOTAL(109;[Total])", but I need the absolute total in VBA. How is that possible?
View 1 Replies View RelatedI have a workbook with three sheets:
-"DB" database sheet containing multiple tables (20 to be exact, named as "CityA", "CityB", etc.)
-"Threat Data" reference sheet containing a "City_Ref" table with the list of tables names in the "DB City ID" column and the unique city name assigned to each table in the "City" column (the city name is populated in a "City" column of each table in the database sheet).
-a dashboard sheet containing an interactive userform for which to populate the database tables.
In this userform, there are two comboboxes:
-a "CbxCity" combobox which lists all the city names from a "City" column in the "City_Ref" reference table
- a "CbxAsset" combobox which should automatically list all the values in the "Asset" column of the selected city table based on "CbxCity"
My issue lies in filling "CbxAsset" based on the selection in "CbxCity" ; how do I dynamically select a ListObject name based on a selection?
The code I am working with is:
[Code] .....
In the CbxCity_Change() sub, I am not sure how to name the ListObject and my code currently gets an error at r = Me.CbxCity.Value
Which is strange because that is showing the selected city name when I run the cursor over the bug.
I know how to get the row number of the cursor in a spreadhseet (Activecell.Row), but how do I get the cursor location in a list object so that I can then insert a new row for the user at that point?
BTW, I am using tables (ListObjects) because when a row is inserted, all of my formulas are automatically inserted.
I'm trying to write a remove duplicates sub that can be passed the worksheet name and columns on which to check. It's pasted below. Above the key line is a commented out line of code that worked. So it works to pass theh worksheet, but I'm hung up on how to pass varying columns to it.
Sub RemoveDuplicatesSub(wksht, cols)
'Remove duplicates.
'Assumes that the data range is in a table
'Assumes the header row starts at row 7
Dim WS As Worksheet
Dim TableName As String
Set WS = Worksheets(wksht)
TableName = WS.ListObjects(1).Name
'WS.Range(TableName).RemoveDuplicates columns:=Array(3, 4, 5, 6, 7, 8, 9, 10), Header:=xlYes
WS.Range(TableName).RemoveDuplicates columns:=Array(cols), Header:=xlYes
End Sub
I have been working on large project using Excel VBA for several days. My code seems to be working correctly, but I have more to do and now, when I drag an object from the toolbox onto a UserForm, the object is not added to the list of objects on the form. If I go back to versions of the project that I was working on several days ago, there is no problem. If I run "Workbook Rebuilder", the objects that I have dragged onto the form are then added to the object list, but I still can't add new objects to forms from within the VBA editor. Is the project corrupted, or is there some other explanation, and are there any fixes? The code runs about 50 pages, and there are over 20 forms, so redoing from scratch is only a last resort option.
View 3 Replies View RelatedI have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
With the following list on Sheet1, on Sheet2 I want list only the Names that don't have a value next to them:
Aaron
Abigail 6
Alexander
Alina 24
Allan
Andrew 5
Ann
That sounds so easy to explain, but I am baffled as to how you can do it with a standard if function without getting the following type of result (this list could be up to 200 names - I only want ones that don't have a populated field next to them):
Aaron True
Abigail
Alexander True
Alina
Allan True
Ann
Can this be done with a groovy IF and INDEX formula, or is VBA (of which I have very limited skills) the only way to go?
I have an excel sheet. In the first sheet is a list of about 200 people. Their names and surnames are written in rows and the list is in columns..
I want to make it so that in the second page, someone will type a name and excel automatically list the names and surnames of all the people in the list of first page.
I would like to count the number of time a name occurs in a range. I tried using a simple pivot table but it did not work because I may not always use all of the names from the list. Also I would like to avoid using the count if formula if possible. Is there a way to use a pivot table to do this?
View 6 Replies View RelatedI have a spreadsheet which has the following data;
Names Age Salary
Fred 23 $19,000
Joe 35 $26,000
Alan 45 $7,000
Richard 32 $25,000
James 19 $16,000
Ian 23 $28,000
Michelle 30 $45,000
I'm trying to list the names only where their age is "xx" or if I choose a certain salary, obviously there are hundreds of names, age's and salary information. How can I carry this out in excel ?
I have a few names in the range A2:A11 and the exercise asks: Fill in the cell B19 with a temporary software name. Using the appropriate function, compose such name as follow: take the first letter from the 1st, 2nd, 3rd names of the list; take the third letter from the 4th, 5th, 6th names of the list; take the last letter from the 7th, 8th, 9th, 10th names of the list. Moreover, the software name must be in capital letters.
View 3 Replies View Related