Loading An Array With Non-consecutive Columns
Aug 17, 2009Is it possible to load non-consecutive columns from a worksheet into an array? This works fine for 1 column:
View 2 Replies
ADVERTISEMENT
Loading An Array
May 15, 2007I'm trying to load an array with numbers from 3 to SheetCount. If someone wouldn't mind giving me a nudge in the right dirrection, it'd be appreciated.
Loading One Array With Data From Another?
Aug 31, 2013I have ten customers who have multiple locations where we do work. On ourinvoice I want to use Data Validation (list option) to read the input "CustomerName", and then change the validation list in the "Job Reference" cell accordingly. For example if A1 is the customer name and A2is the "Reference" where the data validation list will be. Customer ABC has 3 locations, XYZ has 5, CompanyD has 4, and so on. The range for thevalidation array is C1:C5. ABC's list oflocations is located at A10:A15, that of XYZ at A16:A20, and Company D atA21:A25 (and so on, for the others). Howcan I load the data validation range (C1:C5) with the correct list from, forexample A16:20 based on A1 being customer XYZ?
View 1 Replies View RelatedLoading An Array With A Varying Range Size
Mar 12, 2009I want to load one with data from a worksheet query table that will vary in size each time it's executed. The length will vary, but the range is continuous, and five columns wide. I'd prefer a do while loop, looping until a blank cell is encountered. Can someone get me started with general syntax and setup of the array?
View 9 Replies View RelatedLoading Excel Range With Vba-array Blows Up In Office > 2000
Jul 18, 2008I am using the following
xlrng.cells(5,1).resize(5,5) = myarray
If my array contains a text column with any text cell element > 900 bytes
office 2003 and greater blow up
in office 2000 it automatically truncates it without blowing up
if i write my own load loop, and load each cell individually
it works great no-poroblemo, its just extremely slow!
Is there any magic way to get this working correctly without truncation
and without blowing up?
Saving Two Non-consecutive Columns
Jun 13, 2008I have Excel 2000.
If I have columns A B C D E how do I copy A and C only (at the same time) and paste them into a new workbook? I get a popup saying it's not possible.
I don't want to copy one column at a time in case I make a mistake and item 1 in column A no longer lines up with item 1 in column C (I'll be performing this at least daily and the results will go on a website)
Copy Two Non-consecutive Columns Using Last Row?
Sep 3, 2013I am trying to simply copy the range of C7:C LastRow and W7:W LastRow
The code below copies all columns C:W to LastRow. I want just column C and column W.
I've tried some other combinations, but it has me stumped.
Code:
'Range("C7:C" & LastRow, "W7:W" & LastRow).Copy
Copy Non-Consecutive Columns
Jan 26, 2008I have to work with a report where columns are sometimes added or removed. However, the columns I need are always there, just not always at the same place. To identify them, I have my macro search for their title (they never change) and enter the column number in a variable (iSID, iPID, iEPN, iEPT, and iOD).
I now need to take these five columns and copy them into another workbook. Usually, I would use something like Range("A:A":"D:D":etc). but now I'm a bit stuck. I wanted to use something like Range(Columns(iSID), Columns(iPID), etc), but I can't seem to be able to write that correctly or something (I get errors like "wrong number of arguments or invalid property assignment"). I guess I could copy the columns one by one using Columns(iSID), but I was wondering if there wouldn't be a more elegant way to do that.
Delete Every Other Consecutive X Columns
May 6, 2008What is the fastest way to delete 2 consecutive columns after skipping 2 columns?
For eg: Column A Column B Column C Column D Column E Column F
I would like to delete column A & B, skip Column C & D, and then delete Column E & F
Counting Same Values In Consecutive Columns
Dec 11, 2013I was trying to see the values only if the same value arrived more than three times in the given range.
Ex:
ABCDEFGHIJ
1AAAABAA
2
in the given range A1:J1, I would like to count 'A' only if it repeats more than or equal to 3 times. For row 1 I should get count as 4.
Count If Data Is Available In Consecutive Columns
Oct 31, 2013I need an equation that will return a 1 in column F if data is available (cell is populated) in 2013 or last two years (2012 & 2013) or last three years (2011 & 2012 & 2013) or last four years or last five years. A zero counts as data.
Data is set up as:
Years in columns
2009
2010
2011
2012
2013
Count
product 1
34
32
33
31
35
1
[Code] ......
Calculate Average Using Non-consecutive Columns
Feb 18, 2008I have data in 3 different columns (A, C, and E) to name a few. I want to average each of these columns, but if any of them include zero values, I want to exclude that from my calculation.
Example:
Column A = 10
Column B = 0
Column C = 3
Right now, my "average" formula, is showing the average as 4.33. (average a5, b5, c5)
The real average I'm looking for is 6.5. What is the best way to setup my formula?
Non-Consecutive Rows Converted To Columns On Another Worksheet?
Apr 24, 2014I have a worksheet with a series of data in rows. Every 40th row is a sum of the previous forty rows.
I have a second worksheet that in a series of columns uses the 40th row sums from the other sheet. So column 1 uses row 40, column 2 uses row 80 data, etc.
Every time I update this, I create the new column using a copy and insert copied cells and then have to go to each field on the new column that uses this other worksheet to correctly update the formula for the new row. As when I do it this way, if Column 1 cell a1 formula said "worksheet2!A40, then the new column 2 cell b1 says "worksheet2!B40, where I want to make it be worksheet2!A80. I have tried highlighting a series of these corrected columns and dragging the formula over but still get a change in columns vs row from the other sheet.
I am looking to see if there is a way to do something like (in layman's expression):
(first column) worksheet 1, cell a1 = worksheet 2 cell A40
(second column) worksheet 1, cell b1 = worksheet 2 Cell A80
(third column) worksheet 1, cell c1 = worksheet 2 Cell (A80+40)
etc....
Making Dropdown List In Two Consecutive Columns
Jun 26, 2013I have a table where I need to make a drop down list in two consecutive columns (G and H). The list in column H will depend on the Option chosen in Column H.
Column G
Compensation
Payroll
Column H
COMPENSATION
Savings Box
Update Information General PAYROLL
Payment Inquiry Update Information Severance Pay
As shown above If you select Compensation in G you will have those three options in column H and the same for Payroll.
Excel 2010 :: Count Consecutive Numbers Over Multiple Columns / Rows
May 27, 2014I'm using Excel 2010 and my spreadsheet contains numbers in columns A:E and approx 500+ rows. Here is a 10 row example of my data:
A B C D E
0 1 2 3 4
5 6 7 8 9
0 2 4 6 8
1 3 5 7 9
1 2 4 5 8
3 4 5 6 9
9 8 1 2 3
7 6 1 4 0
0 8 2 1 9
1 0 5 3 2
I would like to count the number of consecutive times each number appears (to a max of 9 consecutive times in a row). So, from my example above:
Number 1 appears:
1 consecutive time = 1 (appears in row 1)
2 consecutive times = 1 (appears in rows 4 & 5)
3 consecutive times = 0
4 consecutive times = 1 (appears in rows 7, 8, 9 & 10)
Number 2 appears:
1 consecutive time = 4 (appears in row 1, row 3, row 5 & row 7)
2 consecutive times = 1 (appears in rows 9 & 10)
3 consecutive times = 0
4 consecutive times = 0
Number 5 appears:
1 consecutive time = 2 (appears in row 2 & row 10)
2 consecutive times = 0
3 consecutive times = 1 (appears in rows 4, 5 & 6)
4 consecutive times = 0
and so on....
Use Data From Consecutive Rows Into Non-consecutive Rows On Different Worksheet
Feb 26, 2013I am working on two worksheets. On my first worksheet I have one column with consecutive numbering starting from Cell 8.
A8 = 1
A9 = 2
A10 = 3
A11 = 4
A12 = 5
On my second worksheet I want to link to the values in the first worksheet but not in a consecutive manner. Each number will have an interval of 15 cells. As shown below:
D15 = 'link on Sheet1!A8'
D30 = 'link on Sheet1!A9'
D45 = 'link on Sheet1!A10'
D60 = 'link on Sheet1!A11'
D75 = 'link on Sheet1!A12'
MIN Value Of Two Summed Columns - Array?
Jan 14, 2014Array formulas:
Column A
R1 - 5
R2 - 4
R3 - 3
R4 - 2
R5 - 3
R6 - Blank Row
R7 - 4
Column B
R1 - 6
R2 - 7
R3 - 8
R4 - 9
R5 - 0
R6 - Blank Row
R7 - 4
In a formula on another page I want to add together columns A and B, and then take the minimum of those additions.
So in the case above the minimum value I am after would be 3. This is because on R5 3+0 = 3 which is the lowest number of the additions.
I do not want to add a sum column in the source table and then take the minimum of that as I dont have great access to the source table.
Inside my formula I need to add them then using the min function grab the minimum value of them all.
I have tried many combinations of the MIN, SUM both in Array functions and not in array functions but cannot nail it.
Getting the minimum of 1 column is easy - I am finding getting the minimum of the addition of two very difficult.
I should add that there can sometimes be 8 records, sometimes 10 records. So the formula needs to be written to ignore blank cells, but include cells containing 0.
Array Formula To Sum Columns?
Mar 11, 2014In the first row of my table are the targets for each period of the year and in the second row is the actual performance. The targets for the year will be populated throughout but only periods so far will have a figure for the actual performance.
Thus I have an array formula below:
{=INDIRECT(ADDRESS(2,CELL("col",INDEX(B3:N3,MATCH(2,1/(B3:N3"")))),4))}
Which tells me what the last period's target or performance was (depending on which row number I use).
But when I try to sum it, to find the total for the year to date:
{=SUM(B3:ADDRESS(2,CELL("col",INDEX(B3:N3,MATCH(2,1/(B3:N3"")))),4))}
I get an error. How can I do this?
Array Between Numbers Of 2 Columns
Aug 8, 2009I have account numbers in column A. I have 2 columns which contain account range.For example column/cell f1 contains 45555555 and column cell g1 contains 45666666. I have to check if the account in column A is in this range, and if yes ,I have to have "klo" in column B.
The problem is , that I have to check a lot of rows (and I do not mentioned but I have to check other attributes with the same structure as well) and the do- loop-if structure is rather slow. Could you tell me how can I solve this with say arrays-or with other method-which can boost my macro?
Transpose Array Across Columns
Jan 9, 2007following is code for search in the sheet and give result in other sheet
Private Sub Searchbton_Click() 'Serach button click
'for search
Dim a(), r As Range, res, i As Long, ff As String, rng As Range
Dim title
title = Array("Sr.No", "File#", "Client File#", "Client", "State", "Borrower's Name", " Date Received", "Date & Time File Started", "Title Ordered on", "Type of Search Ordered", "Title Follow up Date", "Title Received on", "File Completed on", "Date & Time E-Mail Sent to Client", "Status", "File Canceled Date", "Remarks", "Done by")
res = Application.WorksheetFunction.Substitute(Me.TextBox1, "-", "")
If Len(res) = 0 Then..........
Problem is when we search for any data and if the recorded data exceeds 307 or more rows, the result will not show the data beyond 307 & more. it take to the Error : Run-time error '13' :Type mismatch error and cursor goto:
.Offset(1).Resize(UBound(a, 2), UBound(a, 1)).Value = Application.Transpose(a)"
Loading Gif
Nov 28, 2009I am not sure whether it can show a loading gif in the front when it executes the vba, after the executions , the loading gif will desappear.
for example here is a loading gif :
[url]
Array Formula Across Multiple Columns
Feb 22, 2010In the attached file on the Final Lists tab I have an Array formula in each column.
My problem is that I need to extend this to cover approx 500 columns. Is there any way that I can cut'n'paste or drag the formula across all the 500 columns, have my references increase with each new column, but also retain my $ references (ie my formula format)?
As it is, I am facing having to either type or correct each and every one of the 500 columns. As you can see, I am a little bit of a newbie when it comes to the intricacies of excel.
Array Formula Using Two Columns And Countif
May 11, 2006Having trouble getting Excel to compute a value based on two columns on another sheet. What I need it to do is see if column A has the value I specify, then look in column B and see if that date figure is greater than 180 days, and then count it. So I might have 45 that meet criteria A, but then need to find items in that subset that meet criteria B...
View 9 Replies View RelatedUsing Array Formula On Columns With Different Lenghts
Feb 12, 2009I want to use following array formula: {=SUM(SQRT((0.004)^2+(B$2:B10-B$1:B9)^2))}
on columns B till U. In the case of column B, the end of the column is at row 10. However, the lenght of the columns varies, so row 10 won't be the end of the column for column C. So for column C the above formula doesn't work anymore.
The beginning of all columns is the same, hence the '$'. Is there a way to change 'B10' and 'B9' in this formula into 'end of column' and 'end of column minus one'? Cause I would like to use the same formula for all columns.
Sorting VBA Array On Worksheet On Two Columns?
Aug 30, 2013I'm trying to sort an array which is of variable height/rows when put on a worksheet. I need to sort by column C ascending (smallest to largest) and then by column D ascending (oldest to newest). I tried recording a macro but the code is just junk.
Code:
Dim BookSPSortingWorksheet As Worksheet
Dim TR As Range
Set BookSPSortingWorksheet = ThisWorkbook.Worksheets.Add
Set TR = BookSPSortingWorksheet.Range("A1").Resize(UBound(array_book_SPNames), UBound(array_book_SPNames, 2))
TR = array_book_SPNames
Is there a way I can use the sort function like the below by indexing my TR range for columns 3 and 4?
Code:
TR.Sort key1:=TR, order1:=xlAscending, MatchCase:=False
Average Array Rows And Columns
Feb 12, 2007code for an assignment, I have a table of values, the 5 colums are arrays, one with 20 student names and the other 4 are grades for 4 subjects, each colum being one subject.
I need code to find the average of each student and get it to display in a separate colum and averages for each subject also getting it to display in another row.
Error In Loading DLL?
Apr 27, 2009Over the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.
View 12 Replies View RelatedLoading Combo Box
Jun 4, 2009I am loading my UF combo box based on data in one of my sheets. I want in a way that if I keep adding to my data sheet, it would add with it.
For some reason it is not loading as I wanted to. I have tried as module and as UF code. Again, for some reason it is not loading.
Here is my code
Find Number Of Rows And Columns Of Array?
Apr 11, 2014how do you find the number of rows and columns of an array?
View 4 Replies View RelatedText To Columns Fields Info Array
Nov 23, 2009I wanted to replace Array(Array(1,1),Array… in TextToColumns.
http://www.ozgrid.com/forum/showthread.php?t=140770
http://www.excelforum.com/excel-prog...o-columns.html
