MIN Value Of Two Summed Columns - Array?
Jan 14, 2014
Array formulas:
Column A
R1 - 5
R2 - 4
R3 - 3
R4 - 2
R5 - 3
R6 - Blank Row
R7 - 4
Column B
R1 - 6
R2 - 7
R3 - 8
R4 - 9
R5 - 0
R6 - Blank Row
R7 - 4
In a formula on another page I want to add together columns A and B, and then take the minimum of those additions.
So in the case above the minimum value I am after would be 3. This is because on R5 3+0 = 3 which is the lowest number of the additions.
I do not want to add a sum column in the source table and then take the minimum of that as I dont have great access to the source table.
Inside my formula I need to add them then using the min function grab the minimum value of them all.
I have tried many combinations of the MIN, SUM both in Array functions and not in array functions but cannot nail it.
Getting the minimum of 1 column is easy - I am finding getting the minimum of the addition of two very difficult.
I should add that there can sometimes be 8 records, sometimes 10 records. So the formula needs to be written to ignore blank cells, but include cells containing 0.
View 3 Replies
ADVERTISEMENT
Jul 18, 2009
I'm hoping there's a more efficient way to do this in that I'd like to replace - for example - over 100 formulas with just 1.
Take this simple example range in a column of numbers: 100 down to 0 and for each cell there's a count of how many times that number is greater than those that follow. The 1st is 100 times, the 2nd 99 times and so on... finally I need a sum of these resulting counts.
My current method would require over 100 formulas in 100 extra cells to do this
View 9 Replies
View Related
Mar 28, 2008
I want to calculate
=SUM(A1:A5)*A6+SUM(B1:B5)*B6+SUM(C1:C5)*C6...
Can I do this with SUMPRODUCT - without listing all the summed ranges out separately?
View 9 Replies
View Related
Feb 10, 2009
I am stumped on a formula answer I am getting on a simple timesheet. The timesheet is set up with an In and Out column for each day and person for the entire month. A formula calculates their total hours worked on a daily basis, minus their lunch (30 minutes per day). So far, so good.
The trouble comes when I try to sum the hours worked for the entire month. I am getting an incorrect total. The example I am working I am summing E3:BN3, which show the employee working 15 days in a month, 12 net hours per day. 15x12=180 hours a month. My sum total is showing up as 300:00:00. It may help to know we use a 24 hour format. I have the results cell formatted as [h]:mm.
View 9 Replies
View Related
Mar 11, 2014
In the first row of my table are the targets for each period of the year and in the second row is the actual performance. The targets for the year will be populated throughout but only periods so far will have a figure for the actual performance.
Thus I have an array formula below:
{=INDIRECT(ADDRESS(2,CELL("col",INDEX(B3:N3,MATCH(2,1/(B3:N3"")))),4))}
Which tells me what the last period's target or performance was (depending on which row number I use).
But when I try to sum it, to find the total for the year to date:
{=SUM(B3:ADDRESS(2,CELL("col",INDEX(B3:N3,MATCH(2,1/(B3:N3"")))),4))}
I get an error. How can I do this?
View 1 Replies
View Related
Aug 8, 2009
I have account numbers in column A. I have 2 columns which contain account range.For example column/cell f1 contains 45555555 and column cell g1 contains 45666666. I have to check if the account in column A is in this range, and if yes ,I have to have "klo" in column B.
The problem is , that I have to check a lot of rows (and I do not mentioned but I have to check other attributes with the same structure as well) and the do- loop-if structure is rather slow. Could you tell me how can I solve this with say arrays-or with other method-which can boost my macro?
View 9 Replies
View Related
Jan 9, 2007
following is code for search in the sheet and give result in other sheet
Private Sub Searchbton_Click() 'Serach button click
'for search
Dim a(), r As Range, res, i As Long, ff As String, rng As Range
Dim title
title = Array("Sr.No", "File#", "Client File#", "Client", "State", "Borrower's Name", " Date Received", "Date & Time File Started", "Title Ordered on", "Type of Search Ordered", "Title Follow up Date", "Title Received on", "File Completed on", "Date & Time E-Mail Sent to Client", "Status", "File Canceled Date", "Remarks", "Done by")
res = Application.WorksheetFunction.Substitute(Me.TextBox1, "-", "")
If Len(res) = 0 Then..........
Problem is when we search for any data and if the recorded data exceeds 307 or more rows, the result will not show the data beyond 307 & more. it take to the Error : Run-time error '13' :Type mismatch error and cursor goto:
.Offset(1).Resize(UBound(a, 2), UBound(a, 1)).Value = Application.Transpose(a)"
View 6 Replies
View Related
Feb 22, 2010
In the attached file on the Final Lists tab I have an Array formula in each column.
My problem is that I need to extend this to cover approx 500 columns. Is there any way that I can cut'n'paste or drag the formula across all the 500 columns, have my references increase with each new column, but also retain my $ references (ie my formula format)?
As it is, I am facing having to either type or correct each and every one of the 500 columns. As you can see, I am a little bit of a newbie when it comes to the intricacies of excel.
View 2 Replies
View Related
Aug 17, 2009
Is it possible to load non-consecutive columns from a worksheet into an array? This works fine for 1 column:
View 2 Replies
View Related
May 11, 2006
Having trouble getting Excel to compute a value based on two columns on another sheet. What I need it to do is see if column A has the value I specify, then look in column B and see if that date figure is greater than 180 days, and then count it. So I might have 45 that meet criteria A, but then need to find items in that subset that meet criteria B...
View 9 Replies
View Related
Feb 12, 2009
I want to use following array formula: {=SUM(SQRT((0.004)^2+(B$2:B10-B$1:B9)^2))}
on columns B till U. In the case of column B, the end of the column is at row 10. However, the lenght of the columns varies, so row 10 won't be the end of the column for column C. So for column C the above formula doesn't work anymore.
The beginning of all columns is the same, hence the '$'. Is there a way to change 'B10' and 'B9' in this formula into 'end of column' and 'end of column minus one'? Cause I would like to use the same formula for all columns.
View 2 Replies
View Related
Aug 30, 2013
I'm trying to sort an array which is of variable height/rows when put on a worksheet. I need to sort by column C ascending (smallest to largest) and then by column D ascending (oldest to newest). I tried recording a macro but the code is just junk.
Code:
Dim BookSPSortingWorksheet As Worksheet
Dim TR As Range
Set BookSPSortingWorksheet = ThisWorkbook.Worksheets.Add
Set TR = BookSPSortingWorksheet.Range("A1").Resize(UBound(array_book_SPNames), UBound(array_book_SPNames, 2))
TR = array_book_SPNames
Is there a way I can use the sort function like the below by indexing my TR range for columns 3 and 4?
Code:
TR.Sort key1:=TR, order1:=xlAscending, MatchCase:=False
View 3 Replies
View Related
Feb 12, 2007
code for an assignment, I have a table of values, the 5 colums are arrays, one with 20 student names and the other 4 are grades for 4 subjects, each colum being one subject.
I need code to find the average of each student and get it to display in a separate colum and averages for each subject also getting it to display in another row.
View 9 Replies
View Related
Apr 11, 2014
how do you find the number of rows and columns of an array?
View 4 Replies
View Related
Nov 23, 2009
I wanted to replace Array(Array(1,1),Array… in TextToColumns.
http://www.ozgrid.com/forum/showthread.php?t=140770
http://www.excelforum.com/excel-prog...o-columns.html
View 9 Replies
View Related
Jun 5, 2014
I have some imported data that lists the date in separate columns.
i.e.
ColumnA ColumnB ColumnC
January.......10.........2013
How do I convert this to a date by using a formula? Later I want to use the date in an array formula to sort the list.
View 8 Replies
View Related
Jun 21, 2014
I am trying to copy several columns into another sheet within the same workbook.
I want to copy Columns 1,2, 15, 19, 23, 40.
I don't know how to work with arrays.
View 4 Replies
View Related
Jul 24, 2014
I have a download from an accounting general ledger which has the following:
Column A: Category Description
Column B: Country
Column C: Department
Row 1: Months
Note: Each row contains the last 12 months worth of costs
As the categories/criteria can appear multiple times, and there are thousands of lines, I have been using SUMIFS to calculate totals my required combinations (eg. Travel expense, Germany, Sales department)
Every month, the information refreshes to show the most recent 12 months worth of data. And this means I need to manually update my formulas to correct the month column headings, as everything moves by 1 month.
Would something like a SUMIF with a SUMPRODUCT work? Eg. if current month = July, then it would sum everything from the July column automatically?
View 4 Replies
View Related
Feb 14, 2014
In the attached example file, I have two tabs: options and sets. The options tab is to be populated from a form. The sets tab is to draw data from the options tab to create teaching sets. I have managed to create an array formula that does this for me, but what I would like it to do is sort my resulting list alphabetically. For reasons that I won't go into, I need the data on the sets tab to remain in three columns: First Name, Surname and Form.
This is the array formula I am using at the moment: AliGW - Example.xlsx
View 14 Replies
View Related
Jul 21, 2014
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
View 3 Replies
View Related
Nov 26, 2008
I'm currently trying to compare all of my companies data sources for staff, ie helpdesk, telephony, ldap etc. and I have made quite a bit of progress, mostly thanks to this forum, however one issue I am running into, is the fact that when I use the text to columns funtion (in a macro) it's splitting up names which are double barrelled into 3 columns. The names are in the format of...
View 2 Replies
View Related
Nov 24, 2008
I'm having difficulty finding a way to ask excel to lookup a value based on an array spanning multiple rows and columns. There's a mock example in the attached.
View 2 Replies
View Related
Oct 3, 2013
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
View 5 Replies
View Related
May 30, 2014
I have two lists in different columns, which are defined ranges. I want to extract them to a unique list with an array formula and at the same time sort albafetically, without duplicates, like this:
List1
List2
Final List
Audi
Ford
[Code] ....
So far, I have this formula which is working in what concerns removing duplicates and exctract a unique list. But it is not ordering alfabeticaly.
{=IFERROR(IFERROR(INDEX(List1, MATCH(0, COUNTIF($D$1:D1, List1), 0)), INDEX(List2, MATCH(0, COUNTIF($D$1:D1, List2), 0))), "")}
View 2 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
Dec 20, 2013
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
View 4 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
