Non-Consecutive Rows Converted To Columns On Another Worksheet?
Apr 24, 2014
I have a worksheet with a series of data in rows. Every 40th row is a sum of the previous forty rows.
I have a second worksheet that in a series of columns uses the 40th row sums from the other sheet. So column 1 uses row 40, column 2 uses row 80 data, etc.
Every time I update this, I create the new column using a copy and insert copied cells and then have to go to each field on the new column that uses this other worksheet to correctly update the formula for the new row. As when I do it this way, if Column 1 cell a1 formula said "worksheet2!A40, then the new column 2 cell b1 says "worksheet2!B40, where I want to make it be worksheet2!A80. I have tried highlighting a series of these corrected columns and dragging the formula over but still get a change in columns vs row from the other sheet.
I am looking to see if there is a way to do something like (in layman's expression):
I want to switch these to one long row from one long column so that they span from Cell A1, A2, etc.
When I special paste or straight paste it obviously alters the formulas because I am also unable to cell lock the current formulas.
I am wondering if there is an easy way to convert my formulas, currently along a column, to a row? Or if there is also a way to cell lock a large amount of cells at once?
I am working on two worksheets. On my first worksheet I have one column with consecutive numbering starting from Cell 8.
A8 = 1 A9 = 2 A10 = 3 A11 = 4 A12 = 5
On my second worksheet I want to link to the values in the first worksheet but not in a consecutive manner. Each number will have an interval of 15 cells. As shown below:
D15 = 'link on Sheet1!A8' D30 = 'link on Sheet1!A9' D45 = 'link on Sheet1!A10' D60 = 'link on Sheet1!A11' D75 = 'link on Sheet1!A12'
If I have columns A B C D E how do I copy A and C only (at the same time) and paste them into a new workbook? I get a popup saying it's not possible.
I don't want to copy one column at a time in case I make a mistake and item 1 in column A no longer lines up with item 1 in column C (I'll be performing this at least daily and the results will go on a website)
I have to work with a report where columns are sometimes added or removed. However, the columns I need are always there, just not always at the same place. To identify them, I have my macro search for their title (they never change) and enter the column number in a variable (iSID, iPID, iEPN, iEPT, and iOD).
I now need to take these five columns and copy them into another workbook. Usually, I would use something like Range("A:A":"D:D":etc). but now I'm a bit stuck. I wanted to use something like Range(Columns(iSID), Columns(iPID), etc), but I can't seem to be able to write that correctly or something (I get errors like "wrong number of arguments or invalid property assignment"). I guess I could copy the columns one by one using Columns(iSID), but I was wondering if there wouldn't be a more elegant way to do that.
I got a worksheet here. I'd like to lock all the cell height and width using protected sheets function. I realized from time to time I have the need to hide them. How do I enable hiding sheets while maintaining cell integrity?
I need an equation that will return a 1 in column F if data is available (cell is populated) in 2013 or last two years (2012 & 2013) or last three years (2011 & 2012 & 2013) or last four years or last five years. A zero counts as data.
I have data in 3 different columns (A, C, and E) to name a few. I want to average each of these columns, but if any of them include zero values, I want to exclude that from my calculation.
Example:
Column A = 10 Column B = 0 Column C = 3
Right now, my "average" formula, is showing the average as 4.33. (average a5, b5, c5)
The real average I'm looking for is 6.5. What is the best way to setup my formula?
I have this worksheet that I did not create and notice it has entire rows and columns completely gone / deleted. For example, the only columns it has ranges from A to AI and then no more columns exist in the worksheet. For the rows, it has rows 1 through 77 but then it shows a gray background.
How did they do this? What is this called? How can I do this to Worksheets?
I would like to search across a number of rows in a worksheet and then match against two columns.
e.g.
Column B Column C
test 10
I would like the function to match against all rows that match against "test" in Column B and then work out which cell in Column C has the highest value
I have searched the forum and the 12 pages of results that had the words conditional clumns, but could not find the answer. I am new here so I don't want to ask a question that has been asnwered before. If I missed it I apologize.
I would like to create a spreadsheet that would "automatically" create the proper number of coumns or rows to satisfy a certain set of data. This may be better explained by way of example.
I do financial analysis of real estate. This real estate is say 100 lots today and these lots are going to sell out evenly over a 10 quarter period, or 10 sales per quarter. Simple enough to set up and show the proper cash flow. But lets say I wanted to chnage the sell out period to 8 quarters. Today I would have to manually delete the last two columns. Further let's say I want to run an analysis that has a sell out over 13 quarters. Then I need to add back in the proper number of columns and make sure I correctly copy over the formulas etc.
I'd like a way to have the spreadsheet automatically determine the proper number of columns (or rows) based on a formula that is part of the input data.
I used the code in the link for "Create Worksheet Index" you referenced and it works great. Is there a way to have the Index and the "back to Index" links appear in separate stationary windows on the left side of the spreadsheets?
I have a table where I need to make a drop down list in two consecutive columns (G and H). The list in column H will depend on the Option chosen in Column H.
Column G Compensation
Payroll
Column H COMPENSATION
Savings Box
Update Information General PAYROLL
Payment Inquiry Update Information Severance Pay
As shown above If you select Compensation in G you will have those three options in column H and the same for Payroll.
I am trying to select non consecutive row in a 700 row spreadsheet in order to change the conditional formatting of those to grey. The change of colour is no problem but I cannot find a way of making the vba instruction to use the user selected rows.
An example would be if the user selected rows 10, 34, 56 and 89 to 105. how could I use this information as the basis for the next instruction.
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
I have requirement to extact data into a spreadsheet. This data is extracted from CSV file which is huge normally over 7MB. I have found a macro on the internet which I have included with this post.
Sub split() Dim ResultStr As String Dim FileName As String Dim FileNum As Integer Dim Counter As Double 'Ask User for File's Name FileName = InputBox("Please enter the Text File's name, e.g. test.txt") 'Check for no entry If FileName = "" Then End 'Get Next Available File Handle Number FileNum = FreeFile() 'Open Text File For Input Open FileName For Input As #FileNum .................
I have also included reult data that I get after running the macro. I have cut down on data due to attachement restrictions. But usually there are multiple spreadsheets named "Sheet1, Sheet2, Sheet3 and so on". I have numerous requirements. First of all I want to be able to spreate data into columns. For now how I do that is by going to data -> text to columns and then selcting delmited and then selecting comma as my delimiter. Second thing I want to do is is only extract range of data from this output into a new worksheet. I am only interest in the name like for example ALBANY-Serial0/0/0 and data that is in the range of 8:00 AM to 6:00PM. So the new sheet should only have name and for that name data in the range of 8:00AM to 6:00PM for all the sheets "sheet1, sheet2 etc" until all data has been extracted.
I am working with an excel file that shows daily whether an individual is checked into a shelter. The dates are often consecutive. I am trying to merge rows to reflect a true length of stay, not daily. here is what my data looks like:
First Last SSN DOBEntry Date Exit Date JaneDoe1111111111/11/11114/1/20094/1/2009 JaneDoe1111111111/11/11114/2/20094/2/2009 JaneDoe1111111111/11/11114/3/20094/3/2009 JaneDoe1111111111/11/11114/4/20094/4/2009 JaneDoe1111111111/11/11114/5/20094/5/2009 JaneDoe1111111111/11/11114/6/20094/6/2009 JaneDoe1111111111/11/11114/7/20094/7/2009 JaneDoe1111111111/11/11114/8/20094/8/2009 JaneDoe1111111111/11/11114/9/20094/9/2009 JaneDoe1111111111/11/11114/10/20094/10/2009 JaneDoe1111111111/11/11114/12/20094/12/2009 JaneDoe1111111111/11/11114/13/20094/13/2009 JaneDoe1111111111/11/11114/14/20094/14/2009 JaneDoe1111111111/11/11114/15/20094/15/2009 JaneDoe1111111111/11/11114/16/20094/19/2009 JaneDoe1111111111/11/11114/21/20094/22/2009
Here is what I would like it to look like: First Last SSN DOB Entry Date Exit Date JaneDoe1111111111/11/11114/1/20094/10/2009 JaneDoe1111111111/11/11114/12/20094/19/2009 JaneDoe1111111111/11/11114/21/20094/22/2009
Does anyone have any suggestions on how I can accomplish this with a macro or otherwise so I don't have to manually go through a year's worth of data? Thanks for your help and time.
Set SourceRange = Worksheets("Sheet1"). Range("A8:A73") Set fillRange = Worksheets("Sheet1").Range("A6:A64000") SourceRange.AutoFill Destination:=fillRange
This filled cells with 7:00 AM, 7:15, 7:30.....11:00 PM all the way down to row 64000,in colum A, 65 rows at a time.
After this, I selected rows 8 to 73 and named it Friday_July_7.
How do I name each chunck of 65 rows based on the prior day, the first range idealy named from a variable assigned to the Now method and incremented with a loop?...or something
I also set a "TODAY" button and a range "SHOWDAY", in the (frozen) first 7 rows of sheet1 to show the current day with the following code.
Private Sub TODAYBUTTON_Click() Worksheets("Sheet1").Activate ActiveWindow.ScrollRow = 8 Range("SHOWDAY").Select Range("SHOWDAY").ClearContents Range("SHOWDAY").Value = Now End Sub
In a perfect world, opening the workbook would activate a procedure that would display the current day in "SHOWDAY" and also scroll to the cooresponding range. clicking the today button would do the same. From here I could refrence each days worth of data by its range name.
I wanted to see if there was a way to hide rows that do not have a pre determined amount of values in a row (one after another). Attached is a simple spread sheet to hopefully illustrate what I need.
I'd like to be able to only show rows where 2 consecutive 0's exsist. Then 3 consecutive 0's. Ultimately I'd like to show anywhere from 2-12 consecutive 0's and have that selection available via the combo box.
What I need specifically is a situation where you choose the Month/Year in a drop down menu in say A1, and then cells B1-Bx display the dates of each day of the month. I’ve been reading tutorials at breakneck speed, and will probably continue to do so.
I work on some High-throughput Projects analyzing biological samples. The software we use for analysis spits out the data into excel. This is all well and good, being mostly automated. However, my issue arises when I get the output data. It's simply one long list of values in a single column. This could potentially be 384 entries. Depending on the parameters of our experiment, I'd like to be able to take a set number of consecutive entries and transpose them to another worksheet. However I don't know how to loop the function to get the specific entries transposed to their specific worksheet. I'm pasting a recorded macro I made to illustrate my point.
I'm looking at test results and would like to know how many times in a row correct answers were given before getting one incorrect. The way I have this currently set up, is if a student has the answer correct it returns a "TRUE" value, and a "FALSE" value for an incorrect answer. A typical test may have 50 questions, so I would have either "TRUE" or "FALSE" values in rows A1 through A50.
So I've been trying to figure out a formula that counts the number of times "TRUE" rows repeat 'consecutively' in a given column, in this scenario column A. The formula would need to check the current row and if "TRUE" check the row immediately after, if that row is also "TRUE" then check the row immediately after that, until it runs into a "FALSE" string, then display that total count of consecutive "TRUES" in another cell. I understand there may be duplicate results but I'm only really interested in the longest value, so duplicates can be ignored.
If it makes the formula easier, each possible result can be assigned to it's own cell. Let's assume the test has 50 questions. So if a student got all 50 questions correct the result count would be 50 in cell B50, or if they got 25 correct before the first incorrect answer, cell B25 would say 25, etc. I'm guessing I could then easily query this column for the largest value to come up with what I need at a glance.
