currently i have a address of a cell, i.e. "$C$3". and i want to search for this cell from a few group cells i.e. "Range1 = $A$1:$A$10", "Range2 = $B$1:$B$8", "Range3 = $C$2:$D$8". after searching for the matching cell, the macro would return the name of the group cell to me, i.e. in this case is "Range3". how would i go about doing that? could anyone enlighten me on this?
View 5 RepliesConditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
I am trying to write VBA code that groups cells between blank rows and inserts a message if a string of text (a name) is missing from the entire group. I want the code to search cells in column A and group the cells between blank cells. Use the name I input in an input box as the search criteria and insert a message in the Column C next to the last blank cell in the group and then move on to the next group and highlight the cell in red with bold text. I am including a spreadsheet with an example of what the sheet should look like before and after the code is run.
View 11 Replies View RelatedI am looking for a formula in D7
In col E I have a range of numbers
In Col AA I have yes or no
I would like to add all of the col E amounts from line 18-72 where the answer in AA of the same line is no or blank
E AA
18 2.00 Yes
19 3.00 Yes
20 5.00 No
21 7.00
D7 = 12.00
how to highlight C2 IF any cell in C4:C20 contain a certain value. if so, what is the formula for the rule?
View 1 Replies View RelatedI have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies View RelatedIs there a way to hide a group of cells based on the value of a cell in another sheet?
I have attached my spreadsheet.
So, based on the selection in H5 on the 'Wood Selection' sheet, I would like to hide cells on the 'Moisture Controlled Schedule' sheet, and the 'Time Controlled Schedule' sheet.
If Ponderosa Pine is selected, I want it to hide all the douglas-fir info, and vice versa
I have a spreadsheet where I want to be able to Fill cells green in Column B to Column N for any Rows that have a value in Column L. All other Rows should remain the current colour (orange).
I can Fill the cells in Column L using conditional formatting but am not sure if I can use Conditional Formatting on other Columns so that their Fill colour is determined by the value in Column L?
im tyring to make excel add one group of cells. but not like 5+5=10 but 5+5=2. confused yet i am. basicly i want it to only count the number of cells with numbers in it. im shipping boxes with differnt amounts in them. but i want to know how many boxs are shipping.
View 13 Replies View RelatedI have date fields as column labels in a pivot table. When I try to group them I'm only given the option to group by integers and not by months, years etc.
I've had a look at the format settings of the column and they are formatted as date fields.
I have a spreadsheet that contains data with the following format:
5 EA/BX
12 EA/PK
Unfortunately, sometimes the data is input without a space:
5EA/BX
12EA/BX
I am looking for a way to insert a space between the data when one does not exist. (I cannot have more than 1 space between the alpha numerical character and the numerical character.)
When you highlight a group of cells and give them a reference name- that name seems to be permanent. How do you delete one or add cells to the reference? Example attached book1.xls Cells A1-B3 are named "TheGroup".
View 2 Replies View RelatedCan someone tell me it is posible to increase cels value (diferent values) from D2 to D21 for example, by 20. I just start to use excel.
View 6 Replies View RelatedI have a column of about 3000 numbers that need to be converted to bar codes. In order for the codes to work, I need to place a set of parentheses "()" around each number in the column. Do I need to do this by hand, or is there a function/script for this? Using Excel 2003
View 2 Replies View RelatedI have a question regarding automatic merging in VBA. Its similar to this thread (Macro Required - Automatically Merge vertically identical cells) but with a slight twist.
So say if I have four columns set up as follows, where the first line contains headings (before)
Team
Position
Salary
Term (years)
Arsenal
Goalkeeper
100
1
[Code] .......
Im looking for something like this (please ignore the periods as i had to put them to keep the table from incorrectly displaying). I'd like to highlight the non-merging of Striker (line 7 and 8 in column2) becasue one belongs to Manchester and the other to Arsenal
Team
Position
Salary
Term (years)
Arsenal
Goalkeeper
100
1
[Code] .......
I have several groups of data in the same sheet. Each group has two blank rows above the first row of data. Each group has column "B" in common (e.g., "Phone" in the example attached). I'd like to add a title/label of "Phone" to the first column in the row immediately preceding the first row of data for that group.
View 1 Replies View RelatedIf I have 5 names like apple, boy, cat, dog, energy
and if i enter a in a cell it should output apple in the same cell.
example: (=IF(A1="a",A1=apple,0))
How to do this?
I am trying to figure out how to Concatenate a group of cells if they contain a certain text. Basically I have a list of Architects in column A and the account name in column B... and I want to say Concatenate column A, IF column B=Specific Account (ex: Coca-Cola). The list will be added to frequently so the formula must refer to the entire columns, not just a certain range.
As of right now, only the first architect associated with each account will appear. I have attached a workbook with the example..
example.xlsx
I have a table with 2 columns A & B and desired outcome in column C (see attached sample).
I need to assign the same value to cells (in column A) located within the same group (in column A) using the following rules:
If any cell value within the same group = W220 or W210 or E240 or E250, then assign value "Group A"
If any cell value within the same group = P210 or C100, then assign value "Group B"
If any cell value within the same group = N230 or N250, then assign value "Group C"
I have a workbook that contains part numbers and their components listed like below. There is always one empty row between the part number and the components, and then 3 empty rows between the last component and the next part number.
The number of components varies from sometimes only 1 up to 25. Currently, I select a part number and its components like B1:C5 and then I have a macro that copies it to another workbook. What I would like to do is somehow get the macro to automatically select the next set down, in this case, B9:C14, so I could copy every set over to its proper place with only one click of the button.
i have a worksheet that is about 100rows x 100columns.
i would like to create some code to find a certain record. for example..
a1 a2 a3 a4
the record might be " tony tony alex tony"
basically, this group of cells could be any where in the group and i need some code to search the worksheet and then outline it. i just want to be able to find a certain block of cells and outline it.
I have some code which refers to a group of cells in another workbook as follows:
Workbooks("SUMMARY06.XLS").Worksheets("JS").Range("H23:H30").Value = ActiveCell.Range("B1:B8").Value
I wish to change the reference to the sheet reference rather than the tab name, but the following doesn't work.
Workbooks("SUMMARY06.XLS").sheet103.Range("H23:H30").Value = ActiveCell.Range("B1:B8").Value
And if I make two or more references to the same Workbook, can I use a with statement, like:
With Workbooks("SUMMARY06.XLS")
.Worksheets("JS").Range("H23:H30").Value = ActiveCell.Range("B1:B8").Value
End With
I need to move a portion of info over 4 columns. I need to do this after a certain criteria is met.
A B C D E
1 Mem# Mem Name Sta Area
2 123C Joe Smith G bev
3 4 Wine 4.95 6
4 5 wine 5.95 6
5 2 food 6.95 5
6 124G Fred Choi C Bev
7 4 Wine 4.95 6
8 5 wine 5.95 6
9 2 food 6.95 5
A3, B3,c3,d3 need to shift over 4 clmns then when nxt member #(a6) is met rows below need to shift over 4 clmns until nxt mem #, so on and so forth. Please Help. New to the macro scene.
Is there a way to hide certain cells using the protect sheet option? Checking the hidden box on the format cells dialogue doesn't seem to do it. I know you can do it by entering ;;; in the custom formating but then if you have to remember which ones you did that too. I would like to be able to hide and unhide a group of cells easily.
how to use the group box to group a number of option buttons together.
Question is, lets say, i have a total of 4 group box. if i want it to work in such a way where by once 2 option buttons are being selected (1 option selected from each group box), the rest of the option buttons in the 4 group box will be greyed out. is that possible?
My store uses a retail price "code" wherein a price like 99 in expressed as a
code like "PP"--exchanging the number digits 1-0 as letters.
Is there a function to do this automatically?
I am working on a contact information form for given relationships, and I'm trying to figure out the best way to design a button that copies the "form" (not an actual VBA form but a grouping of formated cells for information collection) and inserts it into the document. I would also like a button that deletes unused and empty forms so that we only print forms that are filled in.
I tried recording a macro to do it, but it's messy and creates issues with hidden rows and pagination.
What I want is to find out whether a value in a node can be found from a group of other nodes. I've tried lupike this, but it doesn't seem to work properly.
=IF(ISNUMBER(SEARCH(C1;$A$2:$A$200));"WAS FOUND"; "NOT FOUND")
I guess one solution could have been using concatenate function, but why on earth can't I use the function like this: concatenate(A1:A5)? Why do I have to put each term individually?
I'm looking for another excel game changer (for the work I do anyway).
I have a dollar amount, and I want to know if any combination of dollar amounts in a particular range of cells will equal that dollar amount. Is this possible in Excel?
Example: I have 20 different dollar amounts in a column. I want to know what combination of those 20 different dollar amounts, if any, will equal $257.97. The dollar amount I'm looking for and the numbers in the range will change with each use. I'm hoping for a formula, but VBA will work too as I could just make a template and copy / paste the numbers in.
There are two columns of data. Column A is "Group name" and is initially empty. Column B is a list of words
Here is what I am trying to do:
1) prompt the user for 3 input values
2) input value 1 and 2 are COMMON words that i wish to filter through in column B with "filter contains" value 1 or value 2
3) after the filter, i wish to select ALL VISIBLE cells in column A and append the Group Name to each cell