Highlight Cell In Column A If Certain Group Of Cells Contains Certain Value?
May 1, 2014how to highlight C2 IF any cell in C4:C20 contain a certain value. if so, what is the formula for the rule?
View 1 Replieshow to highlight C2 IF any cell in C4:C20 contain a certain value. if so, what is the formula for the rule?
View 1 RepliesI have numbers in 7 groups in cell B2:H8 and winning numbers in cells B11:H27 The function below works fine with: For example if I select cell A2 (G1) numbers are in this row in the cells B2:H2 highlight perfect in the winning numbers in cells B11:H27 As shown in the picture below
A
B
C
D
[Code]....
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
Conditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
I am looking for a VBA to highlight a every other set of rows in a data set in grouped by name. I am able to do so by using conditional formatting but being that I will be doing this on a frequent basis. I have attached an example of what I'd to do.
If c2 = c1 then copy row color, if c2 does not equal c1 then highlight row light grey.
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows.
0:001:002:003:004:005:006:007:008:009:000000-296567-6-1-400000286567-300-230000715557-16-11-40-18141755226-348405-362203081417192125-893581061800-2443-11124-289326-81318-1105027854331331211318-10216-161235526785691450451115951-17-1882505656683093102671056-191-33-2710000554740971-61-78-34224107-169-128-17090179-85220-55-63-1-162-140-242-235328266319106113-214-64-148205-4108120-142076-167-60-68-6418081102-800000000000-3099695807185-80356138-123194186210677727125-23233092-2942944748055564476-422051-224-34461486649597117-84209-22-251-94
I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number.
It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.
Sample workbook for Excel forum.xlsx
I have multiple lists like company A company B so on and on. each has multiple accounts maturing at different dates.how can I group accounts maturing in one particular month? the maturing dates are different in some accounts and same in others.
company A
account no maturity date
account no maturity date
company B
account no maturity date
account no maturity date
so company C, company D etc..
All are on different sheets, I tried to figure out with Vlook up, and filter, but could not make formula.
I have certain cells in my spreadsheet that contain formulas linking them with other sheets within my workbook. I have grouped sets of rows in my first 2 sheets (to show just headings and to expand to subheadings & details). When I try protect the cells with formulas on the sheet then it blocks me from expanding or contracting the row groups.
Is there an easier way to stop someone editing or deleting the data in my cells? There are about 2 dozen cells with formulas in my first sheet that need protecting - unfortunately not in any particular order...
see attached workbook.
I'm attempting to count the empty cells in column C which correspond with the project reference shown in column A. I only want to perform this calculation where the project numbers change (see desired results in column D).
Am struggling with finding a way to define the different range of rows for each project ref within the formula. The full sheet has over 6000 rows and 1500 project refs.
I am trying to write VBA code that groups cells between blank rows and inserts a message if a string of text (a name) is missing from the entire group. I want the code to search cells in column A and group the cells between blank cells. Use the name I input in an input box as the search criteria and insert a message in the Column C next to the last blank cell in the group and then move on to the next group and highlight the cell in red with bold text. I am including a spreadsheet with an example of what the sheet should look like before and after the code is run.
View 11 Replies View RelatedHow do I do "conditional formatting" to high light the numbers which bigger than average + 2 * stdev in a data group?
View 4 Replies View Relatedcurrently i have a address of a cell, i.e. "$C$3". and i want to search for this cell from a few group cells i.e. "Range1 = $A$1:$A$10", "Range2 = $B$1:$B$8", "Range3 = $C$2:$D$8". after searching for the matching cell, the macro would return the name of the group cell to me, i.e. in this case is "Range3". how would i go about doing that? could anyone enlighten me on this?
View 5 Replies View RelatedHow do I get the cells in column "F" to highlight all negative numbers UNLESS the following 2 conditions are met: the number in column F = "-105" AND there is an "@" corresponding in column "C". In the attached file F5 & F7 are highlighted properly according to what I want, but F6 is not (since F6's value is "-105" AND C6's value contains an "@").
View 7 Replies View RelatedHow do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies View RelatedI would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
I am attempting to have a cell highlighted if the adjacent cells are visible, but no highlighting when the cells are hidden. For example, Cell D1 is highlighted when cells A1:C1 are visible, but not when cells A1:C1 are hidden. (this is for the group/outline feature)
View 3 Replies View RelatedI have a spreadsheet showing names, quality percentages and times taken to answer a call in 3 columns. I would like to highlight the cells that fall within the top 20% of those shown (e.g. if there are 100 quality percentages I want to highlight the top 20 not those over 80%) also the same with call length.
I have a column of numbers and times (mins and secs) and what would like to do is set a conditional format so that the cell turns a colour when the number of any cell is within the highest 20% and the other column turns a different colour when the time is within the lowest 20%.
I would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.
HTMLSheet1 *AB154020842*4020843*4020844*4020845*4020846*4020847*40208483
5010909*50109010*50109011*50109012*50109013*50109014*501090153
50112016*50112017*50112018*50112019*50112020*50112021*501120222
50206523*50206524*50206525*50206526*50206527*50206528*50206529450212430*50212431*50212432*502124
What is the best way to highlight all cells in a column from bottom to top?
For example, if I'm in column O, row 138, what keyboard shortcut would I need to select ONLY and ALL cells from the row I'm currently on, (in this example, 138) to row 1 and ONLY in that particular column?
Keep in mind that the next time I may be starting at row 1,200, it could be different everytime.
I tried everything I could think of..
CTRL+A
CTRL+SHIFT+A
CTRL+HOME
CTRL+SHIFT+HOME
CTRL+UP ARROW
CTRL+SHIFT+UP ARROW
CTRL+PAGE UP
CTRL+SHIFT+PAGE UP
and nothing worked to select everything in that column from the row I'm currently on, to row 1.
PART 1
- A record is created
- The record is modified once/several times
- Only the original record and the last modified record needs to be kept
PART 2
- The differences between the original and the last record need to be highlighted in the spreadsheet.
- This has to be repeated for a whole bunch of rows
Currently I am manually deleting the rows and eye-balling the changes. I'm using Excel 2002. I have ASAP Utitilities as well. Although macros are cool, I was hoping I could try with an Add-in or software.
I am looking for a formula in D7
In col E I have a range of numbers
In Col AA I have yes or no
I would like to add all of the col E amounts from line 18-72 where the answer in AA of the same line is no or blank
E AA
18 2.00 Yes
19 3.00 Yes
20 5.00 No
21 7.00
D7 = 12.00
I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies View RelatedIs there a way to hide a group of cells based on the value of a cell in another sheet?
I have attached my spreadsheet.
So, based on the selection in H5 on the 'Wood Selection' sheet, I would like to hide cells on the 'Moisture Controlled Schedule' sheet, and the 'Time Controlled Schedule' sheet.
If Ponderosa Pine is selected, I want it to hide all the douglas-fir info, and vice versa
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
Col A - budget items (description)
Col B - budget dollars
Col C - actual dollars
Row 10 - summation Cols B and C
When the budget is prepared the actual dollars in Col C are equal to the budget dollars for all items. For instance the formula =b2 is placed in cell C2. As time passes the user records actual dollars in Col C for each item by entering the actual amount directly into the cell. Actual dollars do not become known all at the same time, so that Col C will contain a mixture of formulas and entered numbers.
How can I highlight the cells in Col C that have entered numbers rather than formulas.
Formula to highlight a cell in a column when compared to each value in another value. If I have the columns
A B
1 1
1 2
2 3
3 5
4 7
7 8
I want the values in column A to be highlighted if the excist in column B, both of the number 1:s.
I have a spreadsheet where I want to be able to Fill cells green in Column B to Column N for any Rows that have a value in Column L. All other Rows should remain the current colour (orange).
I can Fill the cells in Column L using conditional formatting but am not sure if I can use Conditional Formatting on other Columns so that their Fill colour is determined by the value in Column L?
As I move down a cell, I would like the entire row and column be highlighted. Is that possible?
View 11 Replies View RelatedIn column D I have values it goes like this Randomly
YES
YES
YES
YES
NO
NO
NO
NO
NO
YES
NO
YES
YES
so everytime it changes from one stage to another i need high light either what is was last or what is newly changed to.
example
YES
YES
YES
YES
NO
NO
NO
NO
NO
YES
NO
YES
YES