I have a workbook that contains part numbers and their components listed like below. There is always one empty row between the part number and the components, and then 3 empty rows between the last component and the next part number.
The number of components varies from sometimes only 1 up to 25. Currently, I select a part number and its components like B1:C5 and then I have a macro that copies it to another workbook. What I would like to do is somehow get the macro to automatically select the next set down, in this case, B9:C14, so I could copy every set over to its proper place with only one click of the button.
There are two columns of data. Column A is "Group name" and is initially empty. Column B is a list of words
Here is what I am trying to do:
1) prompt the user for 3 input values 2) input value 1 and 2 are COMMON words that i wish to filter through in column B with "filter contains" value 1 or value 2 3) after the filter, i wish to select ALL VISIBLE cells in column A and append the Group Name to each cell
I am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
Conditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
I have a sheet where I have a "Status" column in each row which could be "Waiting for Band", "Waiting for Organizer", or "Ready to Go!". These options are set as a data validation list. I have 2 cells later in each row where the response can only be "Yes" or "No". I want for the Status column to be set automatically based on the responses in the later two cells. So for example
where C3 and M3 are Yes, the status column in B3 should read "Ready to Go!" where C3 is no but M3 is yes, the status column should read "Waiting for Organizer" where C3 is no and M3 is no, the status column should read "Waiting for Band"
The above is actually an exhaustive list of all of the potential outcomes(!)
I am kind of new to Excel programming and would like to know if there is a solution to my problem. What I need is to have a dropdown list (I know how to make this) then select an item from the drop down, then based on the name i select, Excel automatically fill up the rest of the cells.
For example, from the drop down list I select the company name then Excel automatically type the address, phone number, Fax number and the contact name of the company for me in corresponding cells. Is there a way to do this?
I am trying to write VBA code that groups cells between blank rows and inserts a message if a string of text (a name) is missing from the entire group. I want the code to search cells in column A and group the cells between blank cells. Use the name I input in an input box as the search criteria and insert a message in the Column C next to the last blank cell in the group and then move on to the next group and highlight the cell in red with bold text. I am including a spreadsheet with an example of what the sheet should look like before and after the code is run.
How can I make a macro to automatically insert the information in a new cell (COMP OFFICE). See attached. I want create a macro that cell COMP CODE 1JFQ, 3NM, 1145, 1C1 automatically put "AFP 3" in cell COMP OFFICE, etc. See attached.
There are hundreds of different codes in cell COMP CODE that we are pulling from our main office and internally we have to create COMP OFFICE cell to group them for our own purposes. It take a lot of time for us to manually tag the codes to COMP OFFICE cell
Sheet1 BCDEFGHIJKLMNOPQR31234567891011121314151617400123023458005566006755056785 6 7Output required 8num1num2num3num4num5num6num7+ 912323458556667189 Spreadsheet FormulasCellFormulaC3=B3+1D3=C3+1E3=D3+1F3=E3+1G3=F3+1H3=G3+1I3=H3+1J3=I3+1K3=J3+1L3=K3+1M3=L3+1N3=M3+1O3=N3+1P3=O3+1Q3=P3+1R3=Q3+1B9=D4C9=F4D9=G4E9=J4F9=K4G9=N4H9=SUM(O4:R4) Excel tables to the web >> Excel Jeanie HTML 4
In the B4:R4, there are a set of numbers, zero or non-zero in value (intentionally put in all formulae to show how its set up manually atm).
I want to using formulas on this range to be able to select the first 6 non-zero payments individually (B9:G9) and then group (sum) the rest of the payments in the "num7+" (H9) category.
I have a excel spreadsheet that on sheet 1 has a list of about 130 numbers. Each of these numbers is linked to a specific sheet within the workbook. What im trying to do is write a macro that once i do a FIND it will find the number typed in the find box, once it finds that number on sheet 1, it will automatically select that hyperlink and take me the the correct sheet.
Right now the macro will find the number but I cant get it to auto select the hyperlinkand take me to the correct sheet.
I am compiling a spreadsheet to determine various membership levels of Regular, Bronze, Silver, and Gold, which is based on the number of volunteer events attended at our organization (cell A1), as well as the level of giving (cell B1). Regular is the lowest level, and Gold is the highest.
Now let's say that I am looking for a formula that will be entered into cell C1. This formula would read cell A1 and cell B1, and then return the value that is the higher value. So, let's say the formula in cell A1 returned the value "Silver" and the cell B1 returned the value "Gold", ultimately, the formula in cell C1 would read these two cells, make the determination that the value "Gold" is the higher value, and return "Gold" in cell C1.
I'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
In cell B4 I have data validation drop down list which refers to the range of values named Tarifalist. Tarifalist list has the following range of values: 01,1A-1F / DAC / 02 / OM / HM / 5A (Baja) / 5 (Baja) / 03
In cell B5 I have a data validation drop down list with =IF(OR($B$4="03",$B$4="OM",$B$4="HM"),Thirty,ThirtySixty) Where range Thirty has the value 30, and ThirtySixty has values 30 and 60
I would like in addition, a Macro which when either 03, HM, or OM is selected in cell B4, that it automatically sets the value to 30 in cell B5. The purpose is so that the input is foolproof, and no user can accidentally leave the value at 60. As of now, if the value has been left at 60, and 03, HM, or OM is selected in B4, B5 can stay at 60, which is not a valid input and must be manually changed.
I have two cells and both have a drop down list. I would like Excel to automatically select an item from the second drop-down list based on the manual selection of the first drop-down list. The second cell needs the have the dependent item appear in the second cell not just be available in the drop-down list.
For example, Cell A1 has a drop-down lsit of the names of fruits, vegetables and flowers (apples, bananas, carrots, carnations, corn, daisys, tomatoes, zuchinni). Cell B1 has another drop down with three items (fruits, vegetables & flowers) which needs to be dependent on the first list. Further, I would like cell B1 to automatically select the appropriate item.
For example, if "carrots" is selected in cell A1 then I would like "vegetables" to be selected and automatically appear in cell B1. If "carnations" is selected in cell A1 then I would like "flowers" to appear (not just be available in the drop down).
To sum up - need a drop down box - that when "flange" is selected - It opens a file automatically - no clicking etc. just when that option in the drop down box is chosen.
[Code] .....
But doesn't work, plus means I have to click on something.. etc
im tyring to make excel add one group of cells. but not like 5+5=10 but 5+5=2. confused yet i am. basicly i want it to only count the number of cells with numbers in it. im shipping boxes with differnt amounts in them. but i want to know how many boxs are shipping.
I have date fields as column labels in a pivot table. When I try to group them I'm only given the option to group by integers and not by months, years etc.
I've had a look at the format settings of the column and they are formatted as date fields.
Data is input into my spreadsheet. It is not always in the same cell, and is not always the same length vertically. I want the user to select the top left of the data and then automatically do text to columns. Here is my code that is not working! :
Sub TextToCol2() Dim rng As Range
Set rng = Application.InputBox(prompt:="Select a cell", Type:=8) ActiveSheet.Range("rng:A" & Range("A65536").End(xlUp).Row).TextToColumns DataType:=xlDelimited, ConsecutiveDelimiter:=True, Space:=True End Sub
I have created a user form using the addins that come with excel to create a calendar that will allow the user to select a date and automatically put that in a specific cell. My system is office 2000.
The code is as follows:
Private Sub OK_Click()
Dim i As Integer Dim myCell As Range
i = 0
For Each myCell In Selection myCell.Value = Calendar1.Value + i i = i + 1 Next myCell
Unload Me End Sub
Now, I gave it to my boss who has xp, and I get the following VB error when she chooses a date and clicks on the ok button:
I have a spreadsheet that contains data with the following format:
5 EA/BX 12 EA/PK
Unfortunately, sometimes the data is input without a space:
5EA/BX 12EA/BX
I am looking for a way to insert a space between the data when one does not exist. (I cannot have more than 1 space between the alpha numerical character and the numerical character.)
When you highlight a group of cells and give them a reference name- that name seems to be permanent. How do you delete one or add cells to the reference? Example attached book1.xls Cells A1-B3 are named "TheGroup".
I have a column of about 3000 numbers that need to be converted to bar codes. In order for the codes to work, I need to place a set of parentheses "()" around each number in the column. Do I need to do this by hand, or is there a function/script for this? Using Excel 2003
I have a question regarding automatic merging in VBA. Its similar to this thread (Macro Required - Automatically Merge vertically identical cells) but with a slight twist.
So say if I have four columns set up as follows, where the first line contains headings (before)
Team Position Salary Term (years)
Arsenal Goalkeeper 100 1
[Code] .......
Im looking for something like this (please ignore the periods as i had to put them to keep the table from incorrectly displaying). I'd like to highlight the non-merging of Striker (line 7 and 8 in column2) becasue one belongs to Manchester and the other to Arsenal
currently i have a address of a cell, i.e. "$C$3". and i want to search for this cell from a few group cells i.e. "Range1 = $A$1:$A$10", "Range2 = $B$1:$B$8", "Range3 = $C$2:$D$8". after searching for the matching cell, the macro would return the name of the group cell to me, i.e. in this case is "Range3". how would i go about doing that? could anyone enlighten me on this?
I have several groups of data in the same sheet. Each group has two blank rows above the first row of data. Each group has column "B" in common (e.g., "Phone" in the example attached). I'd like to add a title/label of "Phone" to the first column in the row immediately preceding the first row of data for that group.
I have a spreadsheet where user can search for information inside a search box and the appropriate rows are returned using formulas.
I have a drop down list (Category: Model) in the search box as well as a search field (Category: Program, cell D2). Underneath the search box, search rows are returned with column categories: Program, Model, etc.
What I require is that if a user enters the specific program into the search field D2, then the dropdown list would automatically choose which model that program belongs to based on the returned row.
For example, if I typed "engine" into D2 and pressed enter,
Under the records section (Row 14 and beyond), the following record will pop up:
Program Model Indicators
Engine F-16 3a
Based on the record, F-16 would be chosen from the dropdown list. Is there any way this can be done?
