I have got a database wherein it contains the details like Employee Name, Birth Date, Date of Joining, etc in Sheet1. Suppose, Employee AAA birth date is 30/Jul/1980. When on 30th July 2009, it should display the Employee Id in Cell C3.
How should I lookup for the current date & month from the Employee Birth Date?
Is it possible to convert a students DoB into their term of birth (ToB).
I.e. a student has the DoB of 1/1/2001 which would mean their ToB would be 'Spring'
I suppose what I'm after is...
If a DoB falls into one of three groups
1/1/year to 30/4/year = 'Spring'
1/5/year to 31/8/year = 'Summer'
1/9/year to 31/12/year = 'Autumn'
The year of birth is irrelevant, it's the month which determines the 'term of birth' (Spring/Summer/Autumn).
how to calculate the age from the date of birth and was given these two responses
1) I may be way off here but all that coding seems a waste !
I have in cell A1 = BLANK <--- enter your DOB here
I have in cell A2 =NOW()
in cell A3 do = A2-A1
Format that to General
In Cell A4 do =A3/365
Format that to no deciamal places and you get the age - this one is adding a year to everyones age?
2) Alternatively, if the DOB is A1 :-
=INT(YEARFRAC(A1,TODAY(),1)) - This one does not work it is saying there is an error with the "yearfrac"?
It is also when I am trying to put these into a pivot table, the pivot table is listing these down to 5 decimal places( when I have formatted to zero)????
http://www.cpearson.com/excel/datedif.htm
--
"malvis" wrote:
> Is there a formula that can calculate age when given only Date of Birth?
I am building a spreadsheet that has everyone's birth date on it. If the person is not 22 years of age or older I would like for the cell text containing their birth date to be highlighted in RED.
View 9 Replies View RelatedI have the date of death and the age at death in Years, Month, Days. What formula would I use to figure the date of birth?
View 9 Replies View RelatedI'm trying to use a list of date of births to determine an age output.
However the date of births are all in a simple reverse formate, eg
19790822 would be 22nd August 1979
Ideally, i would take this number and the output would just be the persons age in whole years.
I am using Office 2007 - Excel
I have a list of students with associated Schools
For each High School -Based on students Date of Birth (DOB) I am trying to get a count for:
Students UNDER 16 DOB before 8/25/91 and for each high school students over 16 DOB after 8/25/91
I thought subtototals, countif , maybe a pivot table to break down by school then do the 2 counts -
but I am at a loss for a formula to do the count
I have attached a sample file but the actual file has thousands of students and 23 different High schools which is why I was trying for subtotals or Pivot
I need a formula to calculate age today based on a person's date of birth. I used to know this but I have not used it for awhile.
View 4 Replies View RelatedI am looking for a formula that calculates an individuals exact age given their date of birth. That shows just the age in years.
View 9 Replies View RelatedI am using the following formula:
=DATEDIF(F7,TODAY(),"Y")
I have a about 1200 rows with a column of student's birth dates. I need to convert the dates to ages and have them inputted in the next column Ages. I ran the code in the 'Age' column and it worked for the first birth date. But I do not know how to copy the code to the rest of the rows so it will convert every birth date in each row.
I need to find out over aged students by date of birth - now()-age started to school: DOB 8/16/2000 , Now() Age started school is 8/30/2005. Student is in grade 1. should be age 6, however, he is 8. Answer should be a little over 2 yrs.
View 2 Replies View Relatedhow to make a cell to change color oatomatically accordant to Year and Month reflexted already in the cell. I have a spreadsheet with Names,Surnames,DOB and also a column that is given the AGE years months and days.
If somebody reaches 21 -1 -2 -3 months this should show different colors in the persons row in a particular column. The function used for the AGE is fund on ozgrid.com: =DATEDIF(H4,TODAY(),"y")&" years "&DATEDIF(H4,TODAY(),"ym")&" months "&DATEDIF(H4,TODAY(),"md")&" days"
I have a list of birthdays (in date-month-year format) and simply want to highlight them if the date and month are past today's date.
View 9 Replies View RelatedI have database of my entire staff with thr date of birth and joining date, in the format "mm/dd/yyyyy".
I want if the date of birth is equal to today()+1, that means if someone is having his b'day on 25may ,and today is 24 may so its cell colour should turn into red.
I know conditional formatting is to be used here. but bit confused with the formula.
I am trying with this
=IF(TEXT(C3,"dd-mmmm")=TODAY()+1,true,FALSE), but not working.
means I want if someones b'day is coming , I want to ge t informed earlier.
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I have a colmun of dates of birth, how do I sort them so that they are in order of the day and not by the year?
View 14 Replies View RelatedI have a list (starting with A2) with years of birth (as "1928" for born that year etc.), now - how can I (1) find out how old they are 2009? and (2) can I sort the ages out in three age groups (18-30; 31-55; 56-100)?
I have a table with three columns. I'm building a calendar on a separate worksheet and am looking up the "value" based on a calendar date. So if a date falls within any of the ranges, I'd like to return the value in column C. For example, if the date is 02/07/12, I'd like for the result to be value 1, or if the date is 04/17/12, then I would like the result to be value 3. I've used a nested vlookup, but all that give me is the value when either the start or end dates match, but I can't get a value when the date falls within the range. If the dates were consecutive, I would simply use vlookup/TRUE, but the dates are not consecutive.
ABC102/06/1202/09/12value 1203/12/1203/15/12value 2304/16/1204/19/12value 3405/21/1205/24/12value 4506/25/1206/28/12value 5606/25/1206/28/12value 6
I have several old spreadsheets that contain patient information. Except for names, dates of birth, and dates of surgery there is nothing consistent about them. Not only that, the old spreadsheets were in various stages of compiliation and recompilation when they were abandoned. So now there are multiple duplications of old names added to lists of new names spread across multiple spreadsheets. I have to identify names that are not already in my database and add them.
I have a formula that I found on the internet that I can use to check if a patient’s last name in an old spreadsheet is one that already appears in my main database. In my attached example the formula looks like this:
I am setting up a Cattle management system in excel 2007. In the column F are the date of births for each individual animal. Example: F2 13/03/2013 F3 23/05/2013. I would then like to highlight the cells with the dates in to find all the cattle that are under the age of 16 months from the current date.
View 9 Replies View RelatedI need to add 65 years to a column of birth dates and the result must be in yyyy/mm/dd format. What is the formula?
View 11 Replies View RelatedI am Using Excel 2013 on windows 8 OS,
I have no programming background but I have an Idea about it and I try to write some VBA Macros.
I have 27 Excel files which contain each of them 257368 Row Concerning personal information about persons
the File Format is as Follows:
Place of Birth (POB); Name; Father's Name; Family Name; ID Number; Ethnicity,>>
I have a list of venues and a start date, end date and number of items per day to be installed, which looks like
A - B - C - D
Venue 1 - 01/01/12 - 31/01/12 - 15
Venue 1 - 03/01/12 - 30/04/12 - 10
Venue 2 - 05/01/12 - 28/02/12 - 9
And I want to summarise this in a table with one row for each day of the year which looks like
A - B - C
1/1/12 - Venue 1 - 15
2/1/12 - Venue 1 - 15
3/1/12 - Venue 1 - 25
4/1/12 - Venue 1 - 25
5/1/12 - Venue 1 - 25
etc etc
I can't work out the formula to put in Column C on my second table which will lookup the venue name and then put in the sum of the daily values.
I need to lookup the newest date that is populated and take the corresponding value for that date for each row. For example member ID m1, needs to go to the newest date and show the value for the newest date that it is populated, so it would show the number 5 in column E for 8/4/13, as that is the newest date that is populated. For member ID m2, I need to show the number 7 that corresponds with the date 8/2/13. Attached is a picture for reference.
Attached image : Capture.PNG‎
From cell I1 i want to lookup the date from A1. Then you can drag across automatically insert each date (D1 and G1) into DATE B (J1) and C cells (K1). ie. insert value copied from each date which is located every 4th cell.
View 8 Replies View RelatedI want to lookup a value with a date in between 2 dates. Only outcome I need is a true or a false (0 or 1 is also ok).
Value
Date from
Date to
[Code]....
Lookup value is a "B" and lookup date (12 March 2014) should be in range. ==> outcome 1
Lookup value is a "B" and lookup date (30 april 2014) should be in range. ==> outcome 0
Know this should be done with index and match function.
I have have been trying to use either vlookup or Match Excel functions in VBA code where the lookup key field is a date. I don't have any problems doing either in the spreadsheet, but both fail in my VBA code. I get an error that the program can't find the "Vlookup [or Match] property of the the worksheetfunction object."
I have a thought that I could try to convert the date to an integer, and do lookup on the integer, but even if it works it seems like an escape from doing things the right way. I can get worksheetfunction.vlookup to work when I am not using a date as the lookup field. Sorry I am not enclosing the code. I have changed it so much trying to find a workable solution that it is not much use now.
there is some thought that worksheetfunction.vlookup and worksheetfunction.match don't work in VBA when the lookup field is a date. Possibly this is just an Excel glitch, but if there is a way to fix, that would really make things easier.
I'm trying to create a macro that allows a date to be entered into a Dialog box that is activated by a short cut key.
The macro would use this date to look through all the information on tab Output, and if(as) it finds dates that match the information will then be filled out on tab Schedule.
For clarification Work Center would be the abbreviation (letter code) about the dates.
I have a table with dates and currency-rates. There is only one currency rate per month, but the day can be different since the date is the last working day of the month. I want to lookup these rates based on a date where the day can be any day in the month. Any proposals?
Table example:
Date Rate
30.06.2003 7,09320
31.05.2003 6,70466
Lookup date: 20.05.2003