I cant figure out how to do this, see attached example
I want to use a drop down list on sheet 1 to select a cell from column 1 on sheet 2 and fill in cell e1 with data from column 1 and 3 on sheet 2?
I'm trying to find out how I get a cell to automatically find a code based on the selection of a drop down menu. If drop down menu selction is Rent I want the cell to automatically find the code for rent 61100. It's a large selection that will grow alot bigger than it currently is so needs to also have growing room.? I can't seem to find any answers on here already that seem to work on this, (or understanding them is maybe my fault). I've attached the sheet
View 3 Replies View RelatedI need to create a function that by selecting a sheet name in a drop down box it will remove thinformation on the sheet from a consilidated sheet. The consolidation sheet is consolidating data from 30 sheets within the one worksheet
View 4 Replies View Relatedthe attached spreadsheet is designed to record the number of days off workers have in a week. The drop down menu gives you choices to record the reason why a worker is absent but what I can’t do is total the number of days absent in a week as its words used to describe the absence and not numbers. If any one could assist me to total the days. I have attached an example which should explain the problem in a clearer manner.
View 3 Replies View RelatedScenario: I have 5 different tables, all having the same headers. The values under are Vlookups.
Objective: Create a dropbox that lists (Table 1, Table 2, etc.) For whichever table is picked, is the one that will show.
For example, if I want table 1 to populate, I would chose table one in the drop box and so on for the rest of the other tables.
I am attempting to run a macro that will make conditional formatting I have applied permanent, and then remove the conditional formatting from the cell. My application for this is a master fantasy football cheatsheet, with multiple columns of the same player names ranked in different orders. When a player is drafted I type their name in cell A1, and conditional formatting is setup on so that name (presumably once in each column) will be highlighted/bolded/etc. For example, if I typed "LaDainian Tomlinson" in cell A1, I would be able to find his name in each list/column (from the conditional formatting that will make it stand out), and then run the macro to make this formatting permanent (show he has been drafted), and remove the conditional formatting code, leaving the effects. I found a macro online to do this at the following link, but am having some issues:
When I run the macro on any cells not containing conditional formatting, I get the message: "The formatting based on the conditions in the range (whatever is highlighted) has been made standard for those cells and the conditional formatting has been removed."
This messsage is precisely what I am trying to do, however, when I run the macro on a cell with conditional formatting (when it would actually be beneficial), I get "Run-time error '13' Type Mismatch"
When I go to debug, the error appears to be on the line
If CDbl(rng.Value) = CDbl(FC.Formula1) Then
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
Basicly I used conditional formatting and lots of "IF".My solution lacks in style and it's time consuming ..
Long story short: I need to modify the way some cells are displayed based on the selection in a specific dropdown list.
I need that whenI select Task3 from the dropdown list next to "step1: please select" , everything from row 15 to row21 (both 15 & 21 rows included) and from row 23 on, to disappear.
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
I'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies View RelatedI was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
View 4 Replies View RelatedIs there a way to capture ALL the description in Column D whenever I change the code? This mean if I change the code to 546CC0004, the description will change
Currently I copy manual from this file to another file. I Have more than 100 code with different Description. a Sample is enclosed.
I have named six different sets of data with six different names. I have a drop down box that lists these six different names. When I select one of the names from the drop down box, I would like the lookup I have off of this to change to what ever set of data the drop down selection is referring to. Example: I have my first data set named "Data_A", next "Data_B", etc... When my drop down selects "Data_E", i would like my Hlookup equation to change to HLookUp(a1,Data_E,3,false). Is this possible, or am I doing something wrong?
View 4 Replies View RelatedI have two columns B and C - In column B are the names of people. (12 names in this list) and in column C is a number from 1 - 4 (each person is in either team 1, 2, 3 or 4)
I have a drop down list in Column A which links to a small table (1 2 3 and 4) so the user can choose which team. I need a formula to then list the members of that team, when it has been selected.
I was using a Vlookup command, but this only works for the first person on the list, if i drag the formula down, it is still the same person. I need to show a list of all the members of that team.
getting a macro to dynamically assign a drop down box to a list of numbers?
Specifically, I have a list of numbers in column A, and I would like to dynamically (because the size of the column differs every time) add drop down boxes in column B so that a user may select different values in column A, simply by changing the drop down box value to "Selected"
This would this make it easier for collect all the "Selected" values and perform further analyses upon them.
I am working on a worksheet. I have the first tab at the bottom and that sheet contains all my data, and the additional tabs moving on the bottom are portions of that data for clarity. What i have on the primary sheet is 5 columns ( Name(A), Total(B), Tax(C), Amount(D), Date(E)) and being the master lists everything. I can add a filter to choose the name i want and naturally that only shows the relevant data for that name. What i want to do on the second tab along the bottom which is only relevant for the name i have chosen, their own sheet if you like is to be able to extract the data from the master sheet on a periodical basis. For example I have the same data that i need to show (including some additional stuff that manually include) and i will need to include Total, Tax, Amount and Date columns. What i want is to be able to have a drop down list in the cells below the Date column so that when i select the date it automatically completes the Total, Tax, Amount information that is shown on the primary sheet. So Total will be A column through to Date in D column and changing the date in column D will populate A to C with the data automatically.
View 9 Replies View RelatedI am making a spreadsheet for food and calories, On sheet one i have a meal tracker, I want to have a drop down list in colum 1 that references the food list on sheet 2, column A=food, column B=Protien, column C=Carbs, column D=fat. The values from Sheet 2 columns B-D would then be inserted into Sheet A in the respective slots. I have fiddled with vlookup and tried numerous things but I can't seem to figure this out.
View 3 Replies View RelatedI am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.
The source of the drop down list is material and i need other cells to be populated with the adjacent data.
Here is a small list i have at present, which will be much larger when completed.
MATERIAL 20mm 30mm
Absolute Black £62.15£83.30
Absolute Black Premium£71.65£96.10
African Red £58.20£78.00
So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.
I'm trying to categorise a load of expenses against their appropriate budget and sub-budgets. I've got all the budget subcategories in separate dynamic named lists each headed by the main budget name. I want to be able to select the main budget name e.g. marketing or sales etc and then see, in the next column over, only the appropriate subcategories to select from e.g pick the appropriate dynamic list (I've used dynamic lists so I have some flexibility to add new categories at a leter date).
View 2 Replies View RelatedI have a worksheet containing a list of states in column A and a list of companies in column B (along additional data in columns C-L). I want create a lookup formula on a separate worksheet where users can select the state from a dropdown menu and it will return the information from columns B-L for that state.
For example:
A B C D
Alabama ABC Company Active Expires December 2009
Alabama 123 Company Expired Expired April 2008
Alabama XYZ Company Active Expires August 2009
Alabama Larry Company Expired Expired May 2006
How can I do this without losing my mind? I've tried various Index, Small and Match formulas and none of them work.
I'm trying to create a excel sheet which will automatically return a price based on a given width and drop value. Currently, I calculate the price manually by looking in a price book which has plenty of rows and columns and prices. I want to simplify this by simply entering the dimensions so it automatically calculates price based on the dimensions entered.
Below is the start of my worksheet. If I choose the exact sizes shown on the table, it will return a price, however if I choose a size that is not listed, I get an #N/A. Eg. If I choose 780 x 1500, it will return the price $179, but if I choose for instance 775 x 1490, it only returns #N/A, when I want it to still return the price $179.
My formula in K3 is
=IF(AND($I$3>0,$J$3>0),INDEX($A$3:$F$8,MATCh(J3,$A$3:$A$8,0),MATCH(I3,$A$3:$F$3,0)))
Sheet1ABCDEFGHIJK12ItemWidthHeightPrice
3mm6307809301080123019751821#N/A
49001581681791891992512001621741851952083615001661791912032167
18001701851972102228210017418920321623192400179193208224239102700
18520121823324911Excel 2010Worksheet FormulasCellFormulaK3=IF(AND($I$3>0,$J$3>0),INDEX($A$3:$F$8,MATCH(J3,$A$3:$A$8,0),MATCH(I3,$A$3:$F$3,0)))
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
View 4 Replies View Relatedwhat its called when you have drop down menus that correspond with other drop down menus.
View 2 Replies View RelatedHere is what I'm trying to do:
I have 4 sheets:
1 called main
1 called states
1 called counties
1 called people
On "main" I have 1 drop down box and 1 cell:
the drop down lists the states from "states" sheet
the cell, which i would like to have as a drop down is supposed to be listing the counties in the state selected from the 1st drop down. right now it is setting the value to TRUE for testing purposes.
then when the county is selected, it will display the people in that county listed in "people". So far I can only get the 1st drop down to list the states. that's the easy part. i need to getting the counties to list in another drop down based on what state is selected.
Im a fairly basic VBA user who has just purchased the code for J-Walk's Enhanced Data Form.
On other threads in this forum I have noticed a lot of people asking how to make the contents of one drop-down box dependant on the selection in another. I am trying to do the same thing but with the criteria section of the EDF form.
Is this possible? What does give me hope is that a simple Autofilter - whilst not as aesthetically pleasing, does the job well.
Currently I have columns fixed or assigned to the names of insurance providers/companies.
In each column below the name of the Insurance Company, a combobox containing the plans that company offers. Choose a plan, and the rest of the column is filled in using vlookup.
Now to save space, IE opposed to having 13-15 columns one assigned to each Insurance Company/Provider. I am looking to have only 3-5 columns with a first initial combobox in which one chooses the Name of the Company/Provider, and in turn populate the original combobox and vlookup functionality I already have built in.
Here is an example of what I am working with.
[url]
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedIn the attached example I am trying to get the selections from one drop down to gnerate available selections in the next. The first drop down is the door style. This then needs to generate the possible drop downs in wood species. This then needs to generate the possible drop down in available stains. this then needs to generate the related door factor....
View 9 Replies View Related
