Loop To Delete Worksheets Stops After Deleting One Sheet
Mar 17, 2014
Sub DeleteSheetsPlease()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
Application.StatusBar = "checking " & ws.Name
[code] .......
This skips "Parameters" and "About", then it deletes a single sheet (that does not match "Parameters" or "About"),
BUT THEN IT STOPS, leaving "deleting [WSNAME]" in the appstatus. It's like it skips the "Next ws" statement altogether after deleting a sheet.
I want it to keep looping on all the sheets, but that delete action seems to kill the looping...
View 2 Replies
ADVERTISEMENT
Jan 16, 2009
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies
View Related
Aug 9, 2006
whenever you want to delete a sheet, excel would prompt you to ask you if you are sure you want to delete the sheet. im making a vba so that the sheets will delete upon workbook close, but i dont want to be prompted everytime to be sure to delete it when running the vba macro. Also, i would like to avoid being asked to save any changes to my workbook
View 2 Replies
View Related
Apr 9, 2009
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2()
Dim r As Integer
r = 10
Do Until r = 0
ActiveCell.Value = ("Shut down in " & r)
Application.Wait Now + TimeValue("0:00:01")
r = r - 1
Loop
Application.Quit
End Sub
View 9 Replies
View Related
Jan 7, 2007
I have the following code that loops through a series of data creating a covariance matrix. For some reason the loop only runs through 4 iterations and then stops. I cannot for the life of me figure out what is wrong. Any thoughts? Truncated example workbook also attached....
Sub covarmatrix()
Dim Series1 As Range
Dim Series2 As Range
Dim i As Integer
i = 0
Sheets("rawdata").Select
Do
Set Series1 = Sheets("rawdata").Range(Range("B3").Offset(0, i), Range("B65536").End(xlUp).Offset(0, i))
j = 0
Do
Set Series2 = Sheets("rawdata").Range(Range("B3").Offset(0, j), Range("B65536").End(xlUp).Offset(0, j))..............................
View 8 Replies
View Related
Jan 22, 2007
verify that this syntax is correct. I just started working with Charts in VBA and it is getting very frustrating. This code should be able to run up to 140 cycles but it quits making charts at 7. Something I'm missing? If it is of any relevance sometimes it errors out at the HasTitle and Legend properties.
Dim myChtObj As ChartObject
Dim rngChtData As Range
Dim rngChtXVal As Range
Dim rng As Range
X = 0
y = 2
z = 1
Do Until y = 8
Set rngChtData = ActiveSheet.Range("A2:A352").Offset(0, z)
View 9 Replies
View Related
Oct 31, 2009
How can i delete every formula for a sheet without deleting the contents?
View 5 Replies
View Related
Jul 22, 2013
I have a Macro which deletes a sheet called "Pre selection" with:
Sheets("Pre selection").Select
ActiveWindow.SelectedSheets.Delete
It asks me every time if I am sure and I have to click to continue. Is there any way to remove this prompt or set it to continue without my intervention?
View 3 Replies
View Related
Jun 15, 2009
Having another problem with the same macro that has been giving me trouble for a week now. Now, the macro will run, but after it finishes, excel stops responding. Is this because the macro continues to run indefinitely.
View 3 Replies
View Related
Mar 11, 2009
I am trying to create a loop which stops once a cell is empty.
Assuming I have declared proper DIM, my code is
Row=1
Do
Row = Row + 1
SheetName = Cells(Row, "A")
Sheets.Add.Name = SheetName
Loop Until IsEmpty(SheetName.Offset(1, 0))
View 9 Replies
View Related
May 30, 2014
I have built a sheet - sheet1 like this: It has 2 columns, header (line 1,9,19 etc...)and blank line (line 8,18,27 etc...) between groups. Groups are derived in the first column - Name.
What I'm trying to do is loop to take each group and copy it to a new sheet. Also it is necessary that the name of the new sheet will be derived from column A (A,B,C etc...).
NamePrice
A1,054,999
A1,132,500
A1,140,000[code].....
View 8 Replies
View Related
Nov 4, 2013
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
View 2 Replies
View Related
Sep 28, 2011
I've had a macro running for ages, and just found it bugs out when there are spaces in a sheet name.
The user selects a destination cell as part of a form, which passes the variable to the following steps:
Code:
looperx = 0
Do
looperx = looperx + 1
Loop Until Mid(celldestinationstring, looperx, 1) = "!"
Sheets(Left(celldestinationstring, looperx - 1)).Select
The purpose of which is to isolate the sheet name from the cell reference, which is typically like: 'Bob Sheet'!$B$9
This works fine where there are no spaces, but 'dies' with a runtime error when there are. With the apostrophes I assumed it would work around spaces in the string but I can't get it to work.
View 8 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Oct 15, 2008
I have a macro that that stops every time I’m trying to delete the sheet. I get this message. “Data may exist in the sheet(s) selected for deletion. To permanently delete the data, prese Delete.” and I have to manually click “delete” to continue running the macro. How can I avoid this stop so that macro runs thru it without stops?
View 2 Replies
View Related
Nov 23, 2007
RE: Macro ActiveX Click Control--It stops when on another sheet
Macro runs OK when run from menu.
An activeX click button was put on sheet B.
Right click the control, View Code, Paste in code from macro, then click button.
It runs the part of the macro that applies to sheet B, goes to previous sheet A, and then stops. The range select line for the named range on sheet A is highlighted in yellow. It stops when selecting any range or cell on sheet A, like B2.
Any idea why this code does not work on sheet A when ActiveX button is on sheet B? Is there someplace else that the control can go? Using Excel 2000.
See part of code below, which starts on sheet B:
' Macro recorded 11/22/2007
Range("SortAll").Select
Selection.Sort Key1:=Range("T2"), Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
ActiveSheet.Previous.Select
Range("FormBase").Select (STOPS HERE)
Selection.Copy
Range("Formul").Select
ActiveSheet.Paste
ActiveSheet.Next.Select
FormBase is a named dynamic range
FormBase=OFFSET(A!$A$2,0,0,1,MATCH(1E+306,A!$2:$2))
View 9 Replies
View Related
Aug 10, 2009
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies
View Related
Apr 27, 2007
I am using a BeforeDoubleClick event to look for a worksheet name and if it exists, go to the sheet. If the worksheet does not exist, it is creates a new sheet by copying a hidden sheet and naming it using a name in a cell reference. It works for the most part, but I am finding that it is having an intermittant issue. Sometimes, when I double-click, it double-clicks the target cell for editing, and then it renames the active sheet to the cell reference rather than copying the hidden sheet. It seems to happen when I reach 35 sheets created, but not always. Here is the
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim WSname As String
Dim WScheck As Worksheet
Dim WScheckname As String
If Not Intersect(Target, Range("A5:L85")) Is Nothing Then
WSname = Range("L" & Target.Row)
On Error Resume Next
Set WScheck = Sheets(WSname)
If WScheck Is Nothing Then 'Doesn't exist so create it
Sheets("Master_SLP").Copy Before:=Sheets(Worksheets.Count)
ActiveSheet.Name = WSname.........................
View 5 Replies
View Related
Apr 20, 2009
Loop for Deleting Rows
Whats wrong with my code ?
View 3 Replies
View Related
Jan 2, 2014
I have a problem with the following macro:
Code:
Sub CalcsDelete()
Dim count As Integer
count = 1
For count = 1 To 100
ActiveSheet.Shapes.Range(Array("Picture " & count)).Select
Selection.Delete
count = count + 1
Next count
End Sub
It should simply delete picture 1, picture 2, picture 3, picture 4, etc. The problem lies within the "Picture " & count part.
This is obviously the name of the picture, i.e. picture 1, picture 2, etc.
That's what I tried to accomplish with the for-loop, but I'm not sure how to increment the number of the picture by means of using a for-loop and having that be the new name for the picture.
View 6 Replies
View Related
Jan 29, 2010
I am trying to write a macro that will look through all the worksheets in my workbook and delete any that are called "Data2", "Data3",... "Data#"
So basically I want to find any sheet that has Data and a number after it (with the exception of "Data1") and delete it. Does anyone know of any way to do this?
View 9 Replies
View Related
May 10, 2006
Would anyone have a way to delete worksheets not between worksheets called Beg and End? I am actually looking for a way to delete all worksheets to the left of Beg (including Beg) and all worksheets to the right of End (including End).
View 6 Replies
View Related
Aug 2, 2007
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
View 9 Replies
View Related
May 2, 2014
I am trying to write a macro that takes the value in cell B2 from a workbook called ""numbers" in a worksheet called "summary," and creates a new worksheet in a workbook called "filestransfer" that is named the same thing as the value in cell B2 from "numbers." That part is done.
View 2 Replies
View Related
Mar 24, 2014
I tried to write a macro for deleting some columns automatically in my workbook
- it will be applied to all worksheets, except two worksheets called "samsung" and "toshiba"
- columns will be deleted from V to AA and AU to AZ in the related worksheets
Please check my attached file and my macro inside it.
deleting columns makro.xlsm‎
View 5 Replies
View Related
Mar 27, 2006
My spreadsheet involved plenty of importing of data for Analysis. However the spreadsheet get cluttered very often and i have manually delete the data worksheets.
I was wondering whether is there a way of deleting all the worksheets that contains data(I.E someway of protecting my proccessing and display sheets from being deleted, about 100 of them) or isit possible to delete spreadsheet in a loop with the last char being a number as all my data sheets are named xxx1 ,xyz2 etc and none of my other sheets end with a number
View 9 Replies
View Related
Jun 6, 2006
I'm on a system using Windows XP with several user accounts. It's possible to share a document by putting it in a directory called, unsurprisingly, "Shared files' or somesuch. Anyway, I wish to put one of my Excel spreadsheets into this directory so that other users can see it. The workbook itself has about 10 worksheets and I want other people to be able to edit only one of them. So I used the "Protect Worksheet" option within Excel to protect those worksheets I don't want edited. However, I notice that it's still possible to delete a worksheet even though its protected. Is there a way to prevent from deleting worksheets?
View 2 Replies
View Related
Jun 17, 2014
I need to delete line if 2 conditions are meet.
If col A is blank and col D or E is blank then I want the line deleted for lines 1no more than 100 The option of D or E has me stymied I end up with it not working right. This is what I had tried
Dim lastrow As Long, c As Long
lastrow = Cells(Rows.Count, 1).End(xlUp).Row
For c = 1 To lastrow
If Range("a" & c).Value " " and Range("d" & c). Value " " or Range("e" & c)Then ActiveSheet.HPageBreaks.delete
Next c
But doesn't work
I also need macro to run multiple worksheets which varies anywhere from 12 sheets to 50 sheets.
View 6 Replies
View Related
May 23, 2006
I am using Excel on a work computer that someone else may have changed the settings on.
I want to simply delete a cell, without deleting the entire row the cell belongs to. Yet when I highlight the cell, and go to Edit -> Delete, the program asks me if I want to delete the entire row, and only gives me two options: OK or Cancel. So I can't delete just one cell (and have all of the lower cells shift up one).
When I right click, the 'delete' option is not present either. I tried changing the menu properties to add the 'delete' function, but it will not delete a cell without taking out the whole row.
View 3 Replies
View Related
Aug 3, 2007
I am trying to find a easy way to delete multiple worksheets in a workbook and then saving the workbook based on the tab name of the worksheet.
View 9 Replies
View Related
