verify that this syntax is correct. I just started working with Charts in VBA and it is getting very frustrating. This code should be able to run up to 140 cycles but it quits making charts at 7. Something I'm missing? If it is of any relevance sometimes it errors out at the HasTitle and Legend properties.
Dim myChtObj As ChartObject
Dim rngChtData As Range
Dim rngChtXVal As Range
Dim rng As Range
X = 0
y = 2
z = 1
Do Until y = 8
Set rngChtData = ActiveSheet.Range("A2:A352").Offset(0, z)
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2() Dim r As Integer r = 10 Do Until r = 0 ActiveCell.Value = ("Shut down in " & r) Application.Wait Now + TimeValue("0:00:01") r = r - 1 Loop Application.Quit End Sub
I have the following code that loops through a series of data creating a covariance matrix. For some reason the loop only runs through 4 iterations and then stops. I cannot for the life of me figure out what is wrong. Any thoughts? Truncated example workbook also attached....
Sub covarmatrix() Dim Series1 As Range Dim Series2 As Range Dim i As Integer i = 0 Sheets("rawdata").Select Do Set Series1 = Sheets("rawdata").Range(Range("B3").Offset(0, i), Range("B65536").End(xlUp).Offset(0, i)) j = 0 Do Set Series2 = Sheets("rawdata").Range(Range("B3").Offset(0, j), Range("B65536").End(xlUp).Offset(0, j))..............................
Having another problem with the same macro that has been giving me trouble for a week now. Now, the macro will run, but after it finishes, excel stops responding. Is this because the macro continues to run indefinitely.
I want to late coming and early going of employees. eg. office incoming time is 9 am and 5 mints late coming is allowed 9.05am . and outgoing time is 6pm i am not able to calculate late coming if outgoing is 5.30pm and if put formula =IF(E3>=6,0,6-E3) not working properly.
i have an excel file which tracks break time. The program works by logging in the start time of break and the log out time of the break of every employee. What I would like to do is to have a prompt if the user immediately logs out at an early time. Say if the user's start time break is 1:00 PM, if he happens to log out immediately, he should be given a prompt that he can only log out after 25 of his total 30 minute breaktime. Thus he can only log out at 1:26 PM.
My code below currently logs in and logs out the time but without the prompt i would like to have.
I wish to subtract the date 11/18/1877 from 11/16/1968 to get a result showing the number of intervening days but excel does not want to do it.
When I take 11/18/1900 from 11/18/1968 and format the result to get a number with no decimals the result is 24835 as it should be; but it does not seem to work for dates earlier than 1/1/1900.
Tried with index & Match formula but it throws errors in few cases becoz Cell value are either stored in general or H:mm formats
For ex.
Cell value "05:07" has a custom format applied (hh:mm), and in the formula bar it is displayed as "05:07:00" which is not what we want. When I change the format to 'General' Excel converts the 'time' to decimal, eg "0.213194444444444".
When I manually enter 05:07 the problem is nearly resolved as it changes to 'general' without turning to decimal, but displays as 05:07:00. The formula converts it to decimal where it throws error.
The data consists of 2 columns essentially, Scheduled Delivery Date and Actual Delivery Date.
If the Delivery was made on time or early, I want to count it. I will do a similar count for Late as well.
Additionally, the user can enter the Scheduled date range they want to count early/on time deliveries from. There all also blanks in the Actual Delivery date column where deliveries have not been made (no actual).
Cells O3:O38 contain the Actual dates Cells N3:38 contain the Scheduled dates Cell B3 contains the begin date to start the range. Cell B4 contains the end date of the range.
I have tried using COUNTIFS and am having trouble getting the formula to work.
I know this will not work but I hope it shows the logic I want.Count range O3:O38 where values in O3:O38 are less than or equal to the corresponding cell value in N3:N38, for a range of N3:N38 that is greater than or equal to the date in B3 and less than or equal to the date in B4.
I have some code that run on Excel 2003, and fail on Excel 2000. It happens on functions Left, Right, Mid and Trim. I've found that I must use in "Late Bindings". If exist any convertion for above functions?
My code below works great all the way to the end. When the last message box comes up, If the user chooses Yes. I want them to be directed to the sheet "C123". But currently it just stays on the sheet that I named "Home".
What am I missing here?
Private Sub CommandButton1_Click()
Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("Log")
'find first empty row in database iRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).Row
'check for a Reason Code If Trim(Me.ComboBox2.Value) = "" Then Me.ComboBox2.SetFocus MsgBox "Please enter a reason code and ensure that date is correct!" Exit Sub End If
I have a spread sheet which has a number of protected cells so that they user can tab only on required cells to enter data. At times some of the rows are hidden however pressing "TAB" will continue to tab through on the cells within the Hidden Rows. Is it possible to only TAB through Cells which are visible?
i ran some tests and it was working good only doing folders with ~100 files. i tried running the macro on all the files (~70,000), but I ran into problems with the computer going into standby while I was away. I tried running a batch of 3000 files and it completed, but only got up to around ~400 out of ~3000 records. Maybe, it stops cause of code related inefficiencies?
I have 3 Work books - one (WB1) checks its version number against an online record and if they dont match it opens WB2 which then proceeds to download the updated version copy information from WB1 to its self which it then pastes into WB3
WB1 then gets deleted and WB3 Renamed to the old name of WB1
the issue i have is when i open WB2 using the button that also checks for updates on WB1.
WB2's code seems to just stop when it gets to the point of updating WB3 no error messages or nothing it just stops!
I have this macro which sits in the workbook module:
Code: Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range) Static OldRng As Range
On Error Resume Next If Application.CutCopyMode = xlCopy Or Application.CutCopyMode = xlCut Then OldRng.EntireColumn.FormatConditions(1).Delete OldRng.EntireRow.FormatConditions(1).Delete
[Code] .......
It's used to highlight the selected/active row.
But, as soon as I run another macro, it simply stops working entirely and I'm left with a row permanently highlighted until you manually remove the conditional formatting. All formats and cell colours controlled in the other macro stop working as well. This is the other (edited for publishing) macro, which is used to send an email, and is found in a module:
Code: Sub Send_Mail() 'this sends an email that sends a text message
Dim OutApp As Object Dim OutMail As Object Dim MyButton As String Dim strTo As String
[Code] .......
I didn't write the first macro so I'm not sure where the problem is? I'm guessing there is something in the code that is stopping it from working (i.e. running conditional formats) as soon as another macro is run? Is that was is happening?
I have a macro stored a module at Personel workbook and i am using personel workbook as a hidden one. when i assign a shortcut below macro it is not working but whrn i am press F5 at VBA Editor it is working.
Here is the code:
Code: Sub Transferdata() On Error GoTo err1: Application.DisplayAlerts = False
Dim strProcLine As String With ActiveWorkbook.VBProject.VBComponents(ActiveChart.CodeName).CodeModule ' MsgBox ok
' adaugat procedura goala .CreateEventProc "Calculate", "Chart" 'MsgBox ok strProcLine = "Format_Chart" ' MsgBox ok .InsertLines .ProcBodyLine("Chart_Calculate", 0) + 1, strProcLine ' MsgBox ok End With ' MsgBox ok
This is part of a larger macro, wich makes 2 pivottables and for each PT a chart, and for each chart i create an even procedure (Chart_Activate) wich calls a procedure to format the chart. Tha macro is alocated to the click even on a button in the sheet where i get the information from.
If i run the macro(click the button) with Microsoft Visual Basic Editor opened all goes ok. But if i close Microsoft Visual Basic Editor and then run the macro it stops right before .CreateEventProc "Calculate", "Chart" of the first chart , and i can't understand why. No error mesages delivered, nothing.
I have figures and text that I have been trying to pick up using concatenate but when I get so far the workbook won't calculate. I have numbers plus text like this -24A They start in R8 then U8 then X8 then AA8 then AD8
In AI8 is a count of these numbers between R8 and AD8 (Maximum of 5)
My initial thought was to concatenate(r8"/",u8,"/",x8,"/"aa8,"/",ad8)
Which works but if you only have one number in R8 it looks like this -
24A///. I tried embedded If statements and concatenate and got the calculate problem. A two number example of what I would like is 24A/26B.
i have a worksheet named for example 'allocation 1' this is a master document and is opened and modified and 'saved as' under a customer name. This then stops a few important macros working properly because they refer to the original title and not the new saved title. Is there any code that will let the macro recognise any new title it is saved under?
I work in Excel with a VBA script. The purpose of my script is that every 5 seconds a procedure will be executed. This works well. If my workbook is not active, it does not work. Or when I work with another workbook. Or when I work with another program. Then the script will stop to execute. It looks like a break. I have tried several scripts that have the same effect. I want the script continues normally with execution.
The purpose of which is to isolate the sheet name from the cell reference, which is typically like: 'Bob Sheet'!$B$9
This works fine where there are no spaces, but 'dies' with a runtime error when there are. With the apostrophes I assumed it would work around spaces in the string but I can't get it to work.
I have two subroutines. One subroutine updates some figures on spreadsheet 1, and then calls a subroutine that updates some figures on spreadsheet 2. Spreadsheet 2 is supposed to save and close, and return to spreadsheet 1, but it only gets as far as opening spreadsheet 2 and updating the figures. These are the two subroutines:
Code: Sub UpdateLegalAndMeans() Dim wBook As Workbook Dim count As Integer ' counter for counting down backlog figures
It makes the replacements up to line 37, then stops. If you then delete the first 37 rows and re-run the macro, it again performs replacements, but only on the next 37 rows.
