I am trying to create a loop which stops once a cell is empty.
Assuming I have declared proper DIM, my code is
Row=1
Do
Row = Row + 1
SheetName = Cells(Row, "A")
Sheets.Add.Name = SheetName
Loop Until IsEmpty(SheetName.Offset(1, 0))
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2()
Dim r As Integer
r = 10
Do Until r = 0
ActiveCell.Value = ("Shut down in " & r)
Application.Wait Now + TimeValue("0:00:01")
r = r - 1
Loop
Application.Quit
End Sub
I have the following code that loops through a series of data creating a covariance matrix. For some reason the loop only runs through 4 iterations and then stops. I cannot for the life of me figure out what is wrong. Any thoughts? Truncated example workbook also attached....
Sub covarmatrix()
Dim Series1 As Range
Dim Series2 As Range
Dim i As Integer
i = 0
Sheets("rawdata").Select
Do
Set Series1 = Sheets("rawdata").Range(Range("B3").Offset(0, i), Range("B65536").End(xlUp).Offset(0, i))
j = 0
Do
Set Series2 = Sheets("rawdata").Range(Range("B3").Offset(0, j), Range("B65536").End(xlUp).Offset(0, j))..............................
verify that this syntax is correct. I just started working with Charts in VBA and it is getting very frustrating. This code should be able to run up to 140 cycles but it quits making charts at 7. Something I'm missing? If it is of any relevance sometimes it errors out at the HasTitle and Legend properties.
Dim myChtObj As ChartObject
Dim rngChtData As Range
Dim rngChtXVal As Range
Dim rng As Range
X = 0
y = 2
z = 1
Do Until y = 8
Set rngChtData = ActiveSheet.Range("A2:A352").Offset(0, z)
Having another problem with the same macro that has been giving me trouble for a week now. Now, the macro will run, but after it finishes, excel stops responding. Is this because the macro continues to run indefinitely.
View 3 Replies View RelatedSub DeleteSheetsPlease()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
Application.StatusBar = "checking " & ws.Name
[code] .......
This skips "Parameters" and "About", then it deletes a single sheet (that does not match "Parameters" or "About"),
BUT THEN IT STOPS, leaving "deleting [WSNAME]" in the appstatus. It's like it skips the "Next ws" statement altogether after deleting a sheet.
I want it to keep looping on all the sheets, but that delete action seems to kill the looping...
I want to keep going down a column until I get to an empty cell and then paste some text. I want to write code in vba but I am really struggling with this.
A1 = Hello
A2 = Hello
A3 = Hello
A4 = *Nothing* so I want to paste some text here?
I have some values in column A; i want the code to go thru all these values and do the followings:
1) i want the code to check if there is a valua in the first cell in clomn A; if there is valua - i would like to copy that value and paste it on H1
2) then i wan to copy everything on Column H and paste special in column L2
3) then i want the code to go back on column A and get the second value and paste again in column H1 and then copy everything on column H and paste again the first empty cell in column L and so on..
I want to loop this process until the first empty cell in column A. I have attached spreadsheet for just to clarify what i am trying to do. There are 2 tabs in the spreadsheet, one tab explains the current issue and the other tabs shows how the final result look like.
My code is working with respect to finding the right data, but it keeps overwriting itself on each loop through...I need it to copy/paste and then on the next loop, move down one cell...
[Code] .......
I would like click in cell a6 and then click a button loaded with VBA code that would:
1. Offset over 2 and down 1 to c7 so that is the current cell
2. Repeat down until an empty cell is reached (our example will be c10)
3. Put the items found in c7, c8, c9 into a variable (is that right?)
Variable would then be used in a vba generated email that I have all ready to go. I would want each item placed in the email one after the other like:
Name
Date
Phone
I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.
Do While Cells(i, 2) ""
Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
I am using a BeforeDoubleClick event to look for a worksheet name and if it exists, go to the sheet. If the worksheet does not exist, it is creates a new sheet by copying a hidden sheet and naming it using a name in a cell reference. It works for the most part, but I am finding that it is having an intermittant issue. Sometimes, when I double-click, it double-clicks the target cell for editing, and then it renames the active sheet to the cell reference rather than copying the hidden sheet. It seems to happen when I reach 35 sheets created, but not always. Here is the
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim WSname As String
Dim WScheck As Worksheet
Dim WScheckname As String
If Not Intersect(Target, Range("A5:L85")) Is Nothing Then
WSname = Range("L" & Target.Row)
On Error Resume Next
Set WScheck = Sheets(WSname)
If WScheck Is Nothing Then 'Doesn't exist so create it
Sheets("Master_SLP").Copy Before:=Sheets(Worksheets.Count)
ActiveSheet.Name = WSname.........................
I have a short VBA program that either outputs a number to the cell or nothing. Now, the problem is that for it to output nothing to the cell ie. give the appearence of a empty cell i just write [program name] = "". However I want to be able to multiply my cell with other cells and this generates an error when I have "" in the cell. If I instead output a zero to the cell it works fine, but I dont want a zero, I want empty cells.... for estetic purposes.
I've tried to format the cell as number,
I have created in VBA a formula to look for the last empty cell in the "SBV INFO" sheet and it works.
I now need the VBA to go the the DCWC sheet and only extract the data and amounts from Columns K and M where there is a value more than "0" in column M.
The the data in Column K where the value in Column M is more than "0" must go to the first empty sell (found in the SBV INFO sheet) as per the VBA and the corresponding amount in Column M must go to Column AA (also in the SBV INFO sheet)
In other words from the attachement I need the following:
Column M in SBV INFO sheet 1st empty cell (this will vary which is why i did the formula)
SBV DURBAN WHL
SBV George RET
SBV PEW WHL
Column AA
237,030.00
248,000.00
150,000.00
This might change in future. which means I would have to be able to transfer 1 to 15 of these names and amounts depending on the value in Column M from the "DCWC" sheet.
Im trying to find a formula that when a cell is empty ie this cell is linked to another cell on another worksheet and info has not been entered or is 0 then i want the cell to display the the current date ie =NOW()
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I have a For loop that depends on the number of cells that have a numerical value. I can step through the code and verify that it's not exiting the For loop when the cell value is "Empty".
View 2 Replies View RelatedHow do I make a loop to delete a row if the cell A is empty. Example: If cell A3 was empty I want it to delete the row. If cell A4 had data I would like it to skip that row and go on to cell A5.
View 6 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
how do I write a Do Loop so it will repeat the below until row A is empty? I want the sheets to be added and named based on what someone enters on a data input sheet. i.e. if there are 5 rows with data, then it will create 5 sheets named accordinlgy.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Tab Organization").Select
Range("A2").Select
ActiveCell.FormulaR1C1 = "ABC DEF"
Sheets("Sheet3").Select
Sheets("Sheet3").Name = "ABC DEF"
I'm using a variable to loop down a column of data. Each time it loops the variable may or may not perform an operation - it will if there is something in the cell but won't if the cell is empty. It writes the answer of the operation to an ajoining cell, before looping again.
The issue is that if the row cell is empty, what's written to the ajoining cell is the pre-existing value of the variable, because its value hasn't changed.
how best to 'empty' the variable each loop to ensure either that the correct value or nothing at all is written to the ajoining cell?
Column 'N' and 'O' will be used for inputting information and will never be hidden
Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro
Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden
The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )
If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met
The loop should continue checking for these 3 items through row 500
If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"
Upon closing the message box, the file should save and then exit
If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'
In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'
That last part will give the user a tool to see where they might have forgotton to enter data.
I am using DSUM functions which result in having to have an extra row beneath each of the DSUM formula rows (for the criteria arguments)
The code below checks for color coding and then populates 1 or a 0 in the database for the DSUM formulas
Im trying to optimize the code so that it runs faster. how can i code to skip the rows that do not contain data?
other optimization / best practices that you recommend are appreciated!
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Goto errorout:
If Not Intersect(Target(1, 1), Range("j3")) Is Nothing Then
Application. ScreenUpdating = False
For Each rcell In Range("j11:n731")
If rcell.Value = 1 Then
rcell.Interior.ColorIndex = 37
Else
rcell.Interior.ColorIndex = xlNone
End
I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
View 6 Replies View RelatedI'm working on an excel file where I can see if customers pays too late.
I've got this for the moment:
Date order
Expiration date
Days over
Days too late
Paid?
15/06
15/07
0
-2
NO
[Code] ........
My question is about "Days too late". When Paid changes to "YES", the days too late stays the same number it was before. When it's "NO" it keeps counting.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!