I have built a sheet - sheet1 like this: It has 2 columns, header (line 1,9,19 etc...)and blank line (line 8,18,27 etc...) between groups. Groups are derived in the first column - Name.
What I'm trying to do is loop to take each group and copy it to a new sheet. Also it is necessary that the name of the new sheet will be derived from column A (A,B,C etc...).
NamePrice
A1,054,999
A1,132,500
A1,140,000[code].....
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1
For Each ws In Worksheets
[relevant code]
Next ws
End Sub
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province
Port_Of_Load
Port_Of_Discharge
BK_Client_Name
FF_BK_Name
VesselVoyage
GrossWeight
Export_Closing_Date_Yard................
I want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks
and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet
' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant
Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside
excelfile = Dir(Mypath & "*.xls")
Application.DisplayAlerts = False
Do While excelfile <> "" ' loop all files
Sub DeleteSheetsPlease()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
Application.StatusBar = "checking " & ws.Name
[code] .......
This skips "Parameters" and "About", then it deletes a single sheet (that does not match "Parameters" or "About"),
BUT THEN IT STOPS, leaving "deleting [WSNAME]" in the appstatus. It's like it skips the "Next ws" statement altogether after deleting a sheet.
I want it to keep looping on all the sheets, but that delete action seems to kill the looping...
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
View 3 Replies View RelatedI would like to loop through all spreadsheets in a folder, copy sheet "january" from each spreadsheet into a mastersheet. No idea how using vb all help appreciated.
i would like to change the name of the sheet to a cell reference before it gets pasted into the new sheet.
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I need VBA code for the following - I have a worksheet with seven colums of data (A to G) - I need to copy the first column (A) from the active worksheet then open master workbook called 'master' and paste the data in to column D - then save the 'master' as the name in cell Z1 of the 'master' workbook. Once this has been been completed I need to repeat the process but this time copying column (B) and so on.
View 4 Replies View RelatedI have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10
Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1
2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults")
3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2
4. Repeat Step 2
.
.
.
Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
Attached workbook : autofiltercriteria3.xlsx
I am working a project to move data from Rows 4:35 on a large number of worksheets (all in the same workbook) to Sheet 1 of the workbook by " looping through sheets". I need the data to be compiled. I am a novice at VBA, the code below was given to me (LoopthroughSheets) and the middle portion is a macro I recorded. I cannot get them to work together.
Sub LoopthroughSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Rows("4:35").Select
Selection.Copy
Sheets("Sheet1").Select
Selection.Insert Shift:=xlDown
On Error Resume Next 'Will continue if an error results
ws. Range("A1") = ws.Name
Next ws
End Sub
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies View RelatedI'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedI have 11 worksheets in one workbook, the last worksheet is a total page.
I'd like to run a macro that copies the information from each sheet and pastes it into the total sheet. My range on every sheet begins at A2, but the end of the range is unknown.
All I have so far is trying to loop to a new empty cell on the total page (coded in a module - is that right?):
I have developed a template with tabs for Jan thru Dec, and a Template tab that has the report. the VB code copies the file as a new workbook whenever the year changes, creating something linke 07_Reports.xls. It also copies the "Template" to each Jan-ded tab and adds descriptive info to indicate that it is Jan or Feb etc. There are several sheets, and each has 3 or 4 different reports across the columss. each report has a month by month summary at the top,and daily details for each month down below, with each month detail beginning at 100 row intervals and having a row for each day of the month. i use the month names at the top as hyperlinks to jump to that month's detail.
when the file is created the hyperlinks are not copied from the template tab to each Jan-dec tab. Is there a way to have the Template tab use some type of Relative Reference.
If not is there a way to loop through the Template sheet and identify the properties of all the hyperlinks that exist on the sheet. I have over 30 of these Report templates, one for each Water Well that is involed in this project.
so..
1 - can hyperlinks be relative so that they copy and setup on different worksheets when copied.
2 - if not is there a way to read thru the rows/columns of the worksheet and identify which cells in the template have a hyperlink, get the properties of it, and have vb code create that in the crated tab worksheets.
I have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
I have attempted to use a table of contents macro and then Hlookups to pull corresponding data from each worksheet, but haven't had success
Issue: Excel workbook contains 50+ worksheets formatted the same, with data located in the same cells. Worksheets are constantly added to the workbook so the formula needs to scan the entire workbook
How the data is organized: Subject headings are as follows: Cell A1 is "Loan ID"; A2 is labeled "Deal Name"; A3 is "Property Name"; A6 is "Loan Amount"; and E4 is "Asset Manager". Cells B1,B2, B3, B6, and F4 contain the corresponding data.
Goal: I would like to automatically pull all of this information onto a summary page (much like a table of contents, but with the subject headings running across the top of the page) and the text data running down the page. I would also like to be able to click on the property name and have it direct me to the corresponding tab<br> <br>
I have attached an example of what I am looking for, see "summary" tab for end result and other tabs as make-up of the data.
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
i have one main sheet, and two resource sheets. In main sheet i have resource and project Matrix and in top of the cell i can select the week number. in other sheets, i have week and project matrix for resource. Now what i want is if I enter some details in main sheet, those values should be automatically posted to Resource sheets.
View 2 Replies View RelatedI have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View RelatedInput Workseet:
Col A: Date
Col B through M: Headings are employee names, data is how many hours of vacation per DATE.
User will enter a date in column A, and then the corresponding number of vacation hours a person took that day. There are a dozen or so employees, so we're only entering a record on the dates that someone has taken vacation time. Dates are mm/dd/yyyy format. The hours are number/two decimals.
What I would like:
An update command button (hey, I can actually do that part!) that has an on-click that:
Loops through each column B through M, and copies the information to the employee's individual sheet.
The individual sheets:
Columns are:
A = Date of vacation
B through M are months Jan through Dec.
Data starts *paste* in cell A12, where the date of the first vacation day they take should appear. If it was a half-day in February, .5 (or .50) will appear in cell A14.
If it's not clear, I'm happy to send the file! If you put your email here, I'll send it right away. If you email me at home, it'll be a few hours before I can send.
No rush on my part.
Really appreciate it!! I'm not a coder. I know small bits and pieces. When you start talking about Dim, I think of chinese food.
_________________
TheWordExpert
[ This Message was edited by: Dreamboat on 2002-04-11 10:20 ]
I am trying to store some information in a cell from a UserForm. The two sets of information I have are:
InvoiceNumber(number with no decimals)
InvoiceAmount(currency with two decimal points)
The problem I get is when I use the following command to store the information, it stores the information as text rather then a number.
Worksheets(CustomerName).Range("C" & Position + 1).Value = InvoiceNumber
Worksheets(CustomerName).Range("E" & Position + 1).Value = InvoiceAmount
I tried using the NumberFormat option as below, but it doesnt fix the problem.
Worksheets(CustomerName).Range("E" & Position + 1).NumberFormat = "$#,##0.00"
Worksheets(CustomerName).Range("C" & Position + 1).NumberFormat = "0"
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
View 4 Replies View Related