I am looking to loop through a folder and open every workbook in the folder. For every workbook I would like to copy a range in a worksheet named "explain" and paste values into a separate file. All in all this separate file would be a consolidation of the information from the individual workbooks.
View 2 Replies
In my very crude code below....I would like to speed up the coding so by extracting data from some 800 CLOSED workbooks and pasting the data from Non-contiquous cells in an active workbook on one sheet. Can't seem to ge the = Excelmacro4 closed workbooks method to work so I went with opening each workbook, extracting data and then closing each workbook...way too slow.
Question 2. As the loop progresses...I would like to concatenate the text strings copied from the Source books Ranges G4 and G5 as they are pasted into a single cell in the destination workbook. Can't figure out how to either concatenate or xlpaste special in the coding.
Question 3. IF a user has a one of the workbooks OPEN, how do I copy that data as well other than On Error Resume Next?
Dim wbOpen As Workbook
Dim wbDest As Workbook
Dim WS As Worksheet
Dim i As Long
Sub GetdaData()
Application.ScreenUpdating = False
Application.EnableEvents = False
I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model
[Code]....
I purchased the book VBA and Macros for excel and it has gotten me pretty far in this code, but I am having difficulty with one code though. I want the Macro to run through a specified directory, and copy the contents of the specified cells (9th row to last row) from each file and paste them in the next available space on my master. Then repeat this process for each file in the file directory. So far, it is successfully going through each file, but it isn't pasting it to my master sheet.
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Dim ws As Worksheet
Dim NextRow As Long
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
.LookIn = "K:ESAR GroupForecasting"
.FileType = msoFileTypeExcelWorkbooks
.Filename = "*.xls".........................
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
I am using this code:
VB:
Sub a()
Dim WB1 As Workbook, WB2 As Workbook, MyFile As String, Sep As String, WS As Worksheet
Dim R As Range, X As Integer, a As Range, b As Integer, rownum As Integer, WS1 As Worksheet
Dim R2 As Range, a2 As Range, row As Integer, sep2 As String, MyFile2 As String
[Code] ....
If I run this code without the miles of code i have between them, it loops through each workbook in the folder just fine.
However, I am getting a Runtime 5 error when it reaches Myfile = Dir() each time with my full code.
Here is the full code:
VB:
Private Sub CommandButton1_Click()
Dim WB1 As Workbook, WB2 As Workbook, MyFile As String, Sep As String, WS As Worksheet
Dim R As Range, X As Integer, a As Range, b As Integer, rownum As Integer, WS1 As Worksheet
Dim R2 As Range, a2 As Range, row As Integer, sep2 As String, MyFile2 As String
Sep = Application.PathSeparator
[Code] .....
Once again, I am getting the error message 3 lines from the very bottom ("MyFile = DIR()")
I have written a routine that prompts the user to select an Excel file (using Application. GetOpenFilename) then the routine pulls information from the selected file. I now want to have the user only select the folder and then have the routine loop through every file in the directory, pulling the information from each.
View 9 Replies View RelatedI have the following code which copies and pastes from one row to another
View 3 Replies View RelatedI've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Gross income
Expenses
Net Tax
I am attempting to amalgamate several (100+) spreadsheets into a single spreadsheet. The data is very simple (only three columns, several rows). I have written a simple macro to copy 5 spreadsheets (called TIMESHEET1, TIMESHEET2 etc) into 1 spreadsheet called AMALGAMATED TIMESHEETS. I would like to expand this using a FOR - NEXT loop if possible - or any other way that someone can think of! I cannot use the variable TIMESHEETx as this is not accepted......
View 9 Replies View RelatedI have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies View RelatedI have attached the file. The row being copied is row "X" for both buttons. I have 2 buttons in the same worksheet to copy a row and insert the copied row below it. I have this macro running for 2 different rows in the worksheet, assigned to the respective 2 buttons. See my code below.
View 4 Replies View RelatedI have a folder with files in it. I want to copy the file names and past them into my Excel spreadsheet. This seems like it should be a simple task.
View 6 Replies View RelatedI am creating a macro for a monthly report of inventory. When I filter out items and the copy and paste them to another sheet, how do I tell the macro to paste it in the next available cell rather than say A20? Because the report has a different number of items and filter results from month to month.
View 3 Replies View RelatedI have a range of cells I want to copy which has some textboxes and check boxes in it. When I do a copy/insert cells in vba it only copies the cells and their values but not any of the boxes.
.Range(.Cells(Origin.Row + 1, Origin.Column), .Cells(Origin.Row + 12, Origin.Column + 10)).EntireRow.Copy
.Range(.Cells(Ind.Row, 3), .Cells(Ind.Row, 3)).EntireRow.Insert Shift:=xlDown
I have a database that needs breaking down in order to fulfill a request.
I've been trying to create a macro to copy one row to a new workbook (starting from row 3), file name save as a value of the cell (C1), and move onto the next row. However, my code appears to only loop through 26 entries and then stops.
Code:
Dim row As Long
Dim refname
row = 3
Do While Cells(row).Value ""
[Code] .....
Say I copy "My name is John Doe"
In Cell B2 or D9 or whatever, I want to insert a Comment with it being "My name is John Doe"
How do I make Paste work in Comments?
I'm trying to write a macro that looks in cell A1:VGH1 for the text "Name:" within the row, then copy that cell and other following cells and paste into a new row. This macro can loop through the row until all instances of the text "Name:" and the following cells are on their own row.
What I have currently.
Name:xxx From:xxx Name:xxx To:xxx From:xxx Name:xxx: To:xxx
The result
Name:xxx From:xxxx
Name:xxx To:xxx From:xxxx
Name:xxx To:xxx
Why my code is not working. When I choose a single column it works. Once I select more than one column it doesn't work. It something to do with my "column1:column2" reference.
View 2 Replies View RelatedI have the following code (which works fine when the sheet isn't hidden)
Code:
FinalRow2 = TtlRev.Cells(Rows.Count, 1).End(xlUp).Row
TtlRev.Range("AM6:AO6").Copy
TtlRev.Range(Cells(6, 39), Cells(FinalRow2, 41)).Select
ActiveSheet.Paste
However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
Do we get the option in excel to copy from different locations (just copy a part from say Sheet A, Sheet B and some other excel file) and then pasting all at once in some other file?
View 2 Replies View Relatedi have a huge table which i've filtered for a value in a column. my data has been reduced from 20000 to 100.
how can i copy and paste ONLY the values for those 100 rows? (4 columns and 100 rows)
everytime i do it, it copies all 20k rows!
I have multiple customers in a list that I would like to create individaul tabs for each, with customer name and store #, and at the same time utilizing my sales sheet template for all customers. Is there a way to do this without copying and pasting one by one.
View 9 Replies View RelatedI have a main worksheet with several categories in column A. I would like to set up an IF statement VBA macro, where by if cell "A2" = XYZ, then copy entire row 2 to worksheet XYZ; if cell "A3" = ABC, then copy entire row 3 to worksheet ABC, etc.
View 4 Replies View RelatedI just need a code that will copy items in a row from column A:F...
View 5 Replies View RelatedI have created a daily operating room schedule in which each time slot has a drop down box for the Doctor doing the procedure and the Group of doctors from which he/she came.
It is a yearly schedule with each day of each month duplicated on a tab for that month - the same daily schedule for each.
I have been able to duplicate each day right up until the 25th of the month in which I attempt to save the spreadsheet and am given an error stating it can not save some of the data, though the data appears to be intact (the validation drop down lists)
Upon closing and reopening the spreadsheet, all of the cells that contain validation including and after the 25th of the month are simply gone.
I have attempted to attach a copy of the file but I keep encountering an error with the database.
Zip file with xls file has been added
So, I have a document 25 pages long. It has 26 sections (1-26) and each section has up to 10 (.1 - .10) sub sections which contain 16 (a-p) sub-sub-sections. There are 6 columns of varying widths. Some cells, in a row, merge into adjacent cells.
I would like to break this document into 26 documents - one for each section - so that I may recombine and regroup them in the future incorporating a few modifications. Whenever I copy and paste to a new Workbook, I loose the formatting of column widths. Resetting these alone takes lots of time.
I have come up with is to duplicate the entire document and delete everything above and below the section I would like to save. Then repeat for next section. There's got to be a better way?
