writing a macro that will look to cell A15 on a worksheet "A", decide how big a range is (which is in contiguous cells beneath it - i.e. A20), then select the value of each cell and paste it into a cell in worksheet "B" (for example, if the macro decides the range is 3, then A15 = 1, it would copy and paste that onto the next workbook, then go back to A16 and get that value, paste it into the next workbook, etc). The range will vary in size.
I have a 2 X 44 range of text cells in one worksheet. The first column includes the same array of variables that are found on a second worksheet. In the second worksheet I want to run a looping vlookup to check if the column in the second worksheet is empty, if it is not I want it to lookup the element in that column in that row from the first worksheet and return the 2nd column item to the adjacent column in the second worksheet.
When I run my program in its current form two problems happen. The first row in the range of the column I want the data returned in is empty, and for the rest of the rows the same value is returned, when it should in fact vary. I think part of the problem is that in my vlookup my entries are:
vlookup(CrudeType, Range("Sources"), 2, false) where crudetype is defined as Range("c2:c" & lrow). This is the C column on the second sheet, I want my output in the D column. Range("sources") is on the first sheet and covers D2:E45.
I have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
I am looping through a selected range. The code searches through column B and finds any data. If found, it returns the value to a different workbook to column B. When there is no more data, it goes to column C and does the same thing. My problem is, when there is no data in a column it returns a blank. How do i get rid of this blank???
My ultimate goal is to have some rows of data and and checkbox with each row. I will have a button that will copy only the rows that are checked and paste them into a new worksheet. With the help of some other posts on this site, I was able to figure out how to loop through the checkboxes and copy and paste some data. The problem is I am only copying and pasting in the same rows. I need to know how to move on to the next row that is checked, which is not always the very next row. Here is what I have so far:
Dim i As Integer For i = 1 To 26 If ActiveSheet. OLEObjects("CheckBox" & i).Object.Value = True Then Worksheets("Master"). Range("B8:J8").Select Selection.Copy Sheets("temp").Select Worksheets("temp").Range("A8").Select ActiveSheet.Paste Sheets("Master").Select End If Next
Question: I have a VBA code that transpose every 7th row of a dataset in column A only, however I would like for the code to extend the transpose to (7 row and 3 cloumn).
I have a range of cells in F2:F30000 that I want to round to the nearest whole number.
How can I do that to the entire range of cells without looping? Every search I perform on the topic has a loop of some kind as a solution and my data set could be over 100k rows and speed is already a concern with the workbook.
I have 10 ranges that if the value in a cell falls into one of those ranges, a calculation needs to occur. I think I need to use a macro which i have set up to run off a button click, with a do loop in it, but not sure how to get the loop to move down the range?
for example:
Cell Reference(s):
D 1 250 2 700
Range:
A B C 1 0 150 75 2 150.01 300 125 3 etc.. etc.. etc..
As a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column: apples, pears, apples, oranges, xyz, oranges, xyz, xyz, xyz, apples, apples, apples, xyz, xyz, xyz, xyz, xyz, xyz, xyz, etc.
I need to select the twelfth cell in this column, highlighted red. I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
I am having trouble looping through a range and inserting a formula where a condition is met.
My range is "h9:i"
My current code inserts a formula in column i when there is a value in the adjacent row in column h:
[Code] .....
However, because there are so many rows (12,000+) it is taking a considerable length of time to run.
Some of the cells in column i will already contain the relevant formula, so to speed this up I want to insert the formula in column i only when the cell value (in column i) is not null, as opposed to inserting it for all cells within the range.
I know how to loop through the range, but the problem is the 'H9' cell reference in the formula in the code above will need to change depending on what row it is being inserted into- so if it is going into "i31" this will need to be "h31".
i m looping through each cell in the range A5:G11 and deleting the last part, "',[ABSMacro.xlsm]Region Breakdown'!$S$1:$S$64999" of the formula in each cell.
I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour() For Each Cell In Range("V4:BR4") 'write coordinate into the model
Sub New_Book() Sheets("2006-07").Activate Cells.Select Selection.Copy Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _ False, Transpose:=False ActiveSheet.Paste Application.CutCopyMode = False Sheets("2006-07").Activate Range("A1").Select Sheets("2006-07").Select Range("b3").Select ActiveCell.FormulaR1C1 = "=R[-2]" Dim ThisFile As String Const MyDir As String = "C:" With ThisWorkbook ThisFile = .Worksheets("2006-07").Range("b3").Value . SaveAs Filename:=MyDir & ThisFile End With ActiveWorkbook.Save End Sub
The above VBA works by saving a copy of existing Workbook by refering to cell A1 and then Pasting Special worksheet 2006-07 which has external links. Is it possible to create a looping macro that refers worksheet("BUs") which list all business units I need to run and save? Range(A1) needs have a looping macro that refers worksheet BUs and then automatically saves files without manually changing cell references.
Because I am pulling data from external aplication, so the 0 is fix in a row/column.. I will need to get the row/column for the whole "01" and not only "1".
Is it possible to write a cell formula (not a macro) to loop through a range of cells and test for a value? Something tells me that I need to use the "Offset" function.
How do I continue to loop through the last row and get the values to 3 differrent text boxes?
If I remember right, I think the command is Offset, 1 to go to the right one cell correct?
Sub CommandButton1_Click() '("PowerAnalysis").cells(Row, 3).Value = textbox1.Value 'Worksheets("PowerData").Cells(Row, 3).Value = TextBox1.Value Set WkSht = Worksheets("PowerData") LastRow = WkSht.Range("A" & Rows.Count).End(xlUp).Row
WkSht.Cells(Row, 1).Value = TextBox1.Value
'LastRow = r 'r = ActiveCell 'Dim r As Long 'r = ActiveCell.Row 'UserForm3.Show
'WkSht.Cells(Row, 3).Value = TextBox1.Value UserForm3.TextBox1.Value = r
End Sub
This code is wrong, but how can I get the first three records on the last row to display in three textboxes on UserForm3 titled TextBox1, TextBox2 and TextBox3.
Norie may be right, I may not have to even think about using repaint.
I have created a spreadsheet used for timber design. The spreadsheet calculates whether a specified size of timber column will support a specified load under certain conditions.
The various conditions include, load duration, service class, strength class and limit states.
Ok at the moment the user specifies the load and length of the column, then chooses a size of timber and sets the conditions mentioned above. Once this has been done the calculations i have put together on another sheet, work out whether the size of timber can support the specified load.
It is important to know that the answer for the final strength formula of determining the strength of the column should be equal to or less than 1. If this is the case then the column is ok, if the answer is larger than 1 then the column isnt safe.
Also at various points within the calculation certain checks are required to make sure certain design values satisfy certain criteria. If they dont then a new size of timber sould be tried.
What i would like to be able to do is use a loop so that the spreadsheet will use differing sizes of timber and calculate the values that satisfy the criteria and eventually find the size of timber required. The final answer of the strength calculation should be as close to 1 as possible but not over.
My code is supposed to generate figures to plot the changes in a riverbed profile with time. At time zero, there is a main subroutine that goes through a number of Subroutines and iterations before ending. At time t, I have another main subroutine which is slightly different but would go through most of the subroutines of tine zero. I want the code to go through for time t=0, display the values and then go through the other loops as well, displaying the values for each loop. I thought I knew what I was doing, but the displayed results showed reasonable results for the first (time zero), but the others were just replicas of the same thing. Is there anyway I could use variables with vectors i.e patty(j,i), where i could run the loop for i, and then do Next j.
I have the below code which converts a range to PDF and saves it on our network drive. I would like to change my code to a loop so I don't have to do so much typing. There are 68 rows between each range.
I am trying to code something that will loop through a given set of columns. I know that if I say "For each C in R", that would mean, looping through each cell inside the Range "R", but what I want is something like this:
VB: Dim rzRng As range, rzSmallRng As range Set rzRng = Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
For Each rzSmallRng In rzRng statement here... Next
(I have a total of 30 columns that I need to put inside that Union function) . And then loop through the range as a whole set (not though each cell of that range).
I also tried the following code:
VB: With Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS")) statement here.... End With
But it ended up executing the code in Range"A:A" only.
I am looking to create a loop in a ListObject object that does calculations depending on the value of the current certain row in a column. This is the code I have so far:
[Code]....
I am having trouble with the loop; as you can see, the nested for loop will go through all the 'weight' in the column before going to the next 'grade'. I just want the loop to reference the same 'weight' that the 'grade' is on and move on. But I am not sure how to reference each 'weight' as I progress through each 'grade' in parallel.
I am aware that I can do this with regular cell references:
[Code] ......
but I am more interested in learning on how to work with the ListObject class.
so i've got a spreadsheet that i'm working on that i'm doing some automation for and i'm not sure where to go from here. i don't know too much about coding, but pick up a little here and there.
so what i have is 2 spreadsheets that i'm using to compare data and copy and paste the information found. there is a list of data in column E that i am copying and pasting into the "timestamp log" which has a macros that search for a variable in that workbook, if the variable is found the cell is copied. then "advisor info1" is activated and pasted in column H.
now i'm trying to avoid having to write the below coding for each and every cell in column E that has data to be found. is there a way to loop the process until a blank cell is found? like to have it search cell e2, e3, e4, e5... etc until it hits a cell with nothing in it? sometimes i have over 1000 cells in column E that i need to search through and trying to copy and paste out the below information 1000 times is very tedius and a waste. anyone have any ideas?
i'm not sure if i explained it clearly enough, let me know if you need a little more clarification .......
I have a formula in cell A1 and text in either cell B2 or C2. This text continues down the rows until there is no text in either columns B or C. I wish to copy the formula in A1 into A2 and then continue copying down column A until both cells in column B and C are empty. What is the excel VBA code?
I'm trying to set up a simple macro to loop through some number of dates on a sheet and blank out fields next to every instance of Saturday and Sunday. The only problem I'm having is actually finding the values "Saturday" and "Sunday"
Given a date in this format: 01/01/2009 I can convert to "Thursday"
Problem is, the vba code still "sees" 01/01/2009
I've tried copy / paste special / paste values to no avail. I've tried changing it via VBA (a few different methods, including strings, formats, etc) with no luck. Even tried referencing my date cells from another spreadsheet and pasting the values back in. Can't seem to get 01/01/2009 to be "Thursday"
I have a macro that seems to get bogged down during a replace function because sometimes there is no need to replace. I figure I need to loop this and cannot figure out how to do it.
I have the code below and need to know how to loop this ....
Aloop I am trying to put into a macro. I have a variable range of data in Column C, header is in C1. I need to split the data in each row of the array using this code.