I have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
View 8 RepliesAs a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column:
apples,
pears,
apples,
oranges,
xyz,
oranges,
xyz,
xyz,
xyz,
apples,
apples,
apples,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
etc.
I need to select the twelfth cell in this column, highlighted red.
I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
I'd heard that using FIND might make macros run faster than looping. Below is the code I'm currently using. There are two worksheets. The first has a column containing numbers and a blank column to insert the associated code. Sheet two has a list of unique numbers with the associated code. Presently I used a nested loop to populate the code column of the first sheet. As sheet 1 contains in the neighborhood of 25,000 rows it can take quite a long time to run using the loop
Option Explicit
Sub BWRawCoding()
Dim wb As Workbook
Dim wsPT As Worksheet, wsAgg As Worksheet
Dim RowsPT As Integer, RowsAgg As Integer
Dim LoopPT As Integer, LoopAgg As Integer
Set wb = ActiveWorkbook
Set wsPT = wb.Worksheets("Graphical Data -RAW")
Set wsAgg = wb.Worksheets("agg")
RowsPT = wsPT.UsedRange.Rows.Count
RowsAgg = wsAgg.UsedRange.Rows.Count
For LoopPT = 2 To RowsPT
For LoopAgg = 2 To RowsAgg
If wsPT.Cells(LoopPT, 6).Value = wsAgg.Cells(LoopAgg, 2).Value Then
wsPT.Cells(LoopPT, 24).Value = wsAgg.Cells(LoopAgg, 1).Value
End If
Next LoopAgg
Next LoopPT
End Sub
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
View 2 Replies View RelatedThe following macro searches Sheet1 for a value in a user defined textbox. When it finds the value it copies the row and and pastes the row in another sheet and then loops. My problem is i need to add a "do until" so that i will stop. I just don't know what code to add after the "until" to have it search the sheet once and then stop. Right now it will repeat infinitly. I need to know how to get it to stop once it looks through all the cells once. My current code is:
Private Sub CommandButton1_Click()
Do
Sheets("sheet1").Activate
Application.CutCopyMode = False
Cells.Find(What:=TextBox1, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Select
ActiveCell.EntireRow.Copy....................
I've written a macro which searches the sheet for a value, when it finds the value it does something, then I want it to keep looping until it's done.
The issue is that Excel's find does not search first to last. Once it gets to the last, and you search next, it goes back to the beginning and finds the first cell.
In order to break out of the loop, I figured I should store the first cell found in a variable and then check inside my loop to see if I have got looped back to the beginning. If I got back to the first cell found, then I exit my loop and I'm done.
However, my code doesn't work. It exits the loop after a couple of iterations.
Sub Macro5()
'
' Macro2 Macro
'
If WorksheetFunction.CountIf(Cells, "TEST") = 0 Then
MsgBox ("Not Found")
Exit Sub
End If
Cells.Find(What:="TEST", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) _
.Activate...............
to perform find, if match, ubdate, looping action in various sheets of excel through VB.
Currently, i am working at WAREHOUSE, where not having SAP OR ERP to perform [ maintain ] each & every in & out movement of products. However, i have been using excel to put in values for in & out manually....
What I'd like to know now is if there is a way to loop through a set of controls...I'll call that set 'A' and if the value "No Option" is found in one of A's controls, then a corresponding control in set 'B' is formatted as disabled and with a value of 'X'.
Ex. Control A1 = "Cat"
Control B1 is enabled with no value
Control A2 = "Dog"
Control B2 is enabled with no value
Control A3 = "No Option"
Control B3 is disabled with a value of 'X'
Control A4 = "No Option"
Control B4 is disabled with a value of 'X'
The code below shows where the wheels came off:
Option Explicit
Const lGrey As Long = &H80000005
Const lGreen As Long = &HFF00&
Dim BM1 As String
Dim TextBox As Control
Dim TextBox1 As Control
Private Sub UserForm_Activate()
LoadOptionCriteriaData
LoadFormat
End Sub
Where i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
I have modified some code I found in these forums that once I enter a value in a cell I can have it find the closest match to that value and scroll down the list and paste that value as an offset. The code works perfectly, but my data will often contain the same values repeated and these aren't duplicates and I need to know how to loop the code to ensure it doesn't just find the first value but also the second (if the first is already populated) Code is:
Sub findclose()
Dim rng As Range, Dn As Range, Mx As Single, oAd As String
Dim num As Range
Set num = ActiveSheet.Range("B1")
[Code] .......
---- What I need to do is insert a loop of some sort that basically says IF my offset cell has a value then to find the next closest amount and continue the macro.
So if my list was:
700
50
500
600
500
And I wanted to find 499 then my list would look like:
700
50
500 499
600
500
BUT if I wanted to match off another amount of 501 it would keep the 499 it found and then find the 501 making the completed list look like:
700
50
500 499
600
500 501
Right now the amounts are being overidden as I don't know how to loop it...
My spreadsheet's column Z is a delivery date. When the workbook is started up (preferrably once per day, rather than each and every time you start it in a day), I would like to be able to loop through column Z, and if the date is today, toss the same row's columns A, D, and J on to `Summary`!A2:A?? (however many rows it needs), concatenated. I know I can do it easily with a for loop, but as I've learned, for loops tend to be really slow. Is there a quick or better way to do this than with a for loop?
View 9 Replies View Relatedwriting a macro that will look to cell A15 on a worksheet "A", decide how big a range is (which is in contiguous cells beneath it - i.e. A20), then select the value of each cell and paste it into a cell in worksheet "B" (for example, if the macro decides the range is 3, then A15 = 1, it would copy and paste that onto the next workbook, then go back to A16 and get that value, paste it into the next workbook, etc). The range will vary in size.
View 9 Replies View RelatedI have a 2 X 44 range of text cells in one worksheet. The first column includes the same array of variables that are found on a second worksheet. In the second worksheet I want to run a looping vlookup to check if the column in the second worksheet is empty, if it is not I want it to lookup the element in that column in that row from the first worksheet and return the 2nd column item to the adjacent column in the second worksheet.
When I run my program in its current form two problems happen. The first row in the range of the column I want the data returned in is empty, and for the rest of the rows the same value is returned, when it should in fact vary. I think part of the problem is that in my vlookup my entries are:
vlookup(CrudeType, Range("Sources"), 2, false) where crudetype is defined as Range("c2:c" & lrow). This is the C column on the second sheet, I want my output in the D column. Range("sources") is on the first sheet and covers D2:E45.
[Code]....
I am looping through a selected range. The code searches through column B and finds any data. If found, it returns the value to a different workbook to column B. When there is no more data, it goes to column C and does the same thing. My problem is, when there is no data in a column it returns a blank. How do i get rid of this blank???
View 1 Replies View RelatedMy ultimate goal is to have some rows of data and and checkbox with each row. I will have a button that will copy only the rows that are checked and paste them into a new worksheet. With the help of some other posts on this site, I was able to figure out how to loop through the checkboxes and copy and paste some data. The problem is I am only copying and pasting in the same rows. I need to know how to move on to the next row that is checked, which is not always the very next row. Here is what I have so far:
Dim i As Integer
For i = 1 To 26
If ActiveSheet. OLEObjects("CheckBox" & i).Object.Value = True Then
Worksheets("Master"). Range("B8:J8").Select
Selection.Copy
Sheets("temp").Select
Worksheets("temp").Range("A8").Select
ActiveSheet.Paste
Sheets("Master").Select
End If
Next
Question: I have a VBA code that transpose every 7th row of a dataset in column A only, however I would like for the code to extend the transpose to (7 row and 3 cloumn).
This is the code:
Sub Transpose()
Dim A() As Variant
Dim i As Long
[Code].....
I have a range of cells in F2:F30000 that I want to round to the nearest whole number.
How can I do that to the entire range of cells without looping? Every search I perform on the topic has a loop of some kind as a solution and my data set could be over 100k rows and speed is already a concern with the workbook.
I have 10 ranges that if the value in a cell falls into one of those ranges, a calculation needs to occur. I think I need to use a macro which i have set up to run off a button click, with a do loop in it, but not sure how to get the loop to move down the range?
for example:
Cell Reference(s):
D
1 250
2 700
Range:
A B C
1 0 150 75
2 150.01 300 125
3 etc.. etc.. etc..
Formula:
=if(and(d1>a1,d1
I am having trouble looping through a range and inserting a formula where a condition is met.
My range is "h9:i"
My current code inserts a formula in column i when there is a value in the adjacent row in column h:
[Code] .....
However, because there are so many rows (12,000+) it is taking a considerable length of time to run.
Some of the cells in column i will already contain the relevant formula, so to speed this up I want to insert the formula in column i only when the cell value (in column i) is not null, as opposed to inserting it for all cells within the range.
I know how to loop through the range, but the problem is the 'H9' cell reference in the formula in the code above will need to change depending on what row it is being inserted into- so if it is going into "i31" this will need to be "h31".
i m looping through each cell in the range A5:G11 and deleting the last part, "',[ABSMacro.xlsm]Region Breakdown'!$S$1:$S$64999" of the formula in each cell.
View 2 Replies View RelatedI have about 20 different workbooks and i want to create identical tables and graphs in each one of them using the least number of steps.
The number of the rows changes by workbook but the colums are identical. So the range will vary by workbook.
so for example:
workbook1=
name sales
a 10
b 20
c 30
workbook2=
name sales
a 10
So I want a macro that does the tabling and charting in workbook1 and automatically moves to workbook2 and so on.
I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model
[Code]....
Sub New_Book()
Sheets("2006-07").Activate
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
ActiveSheet.Paste
Application.CutCopyMode = False
Sheets("2006-07").Activate
Range("A1").Select
Sheets("2006-07").Select
Range("b3").Select
ActiveCell.FormulaR1C1 = "=R[-2]"
Dim ThisFile As String
Const MyDir As String = "C:"
With ThisWorkbook
ThisFile = .Worksheets("2006-07").Range("b3").Value
. SaveAs Filename:=MyDir & ThisFile
End With
ActiveWorkbook.Save
End Sub
The above VBA works by saving a copy of existing Workbook by refering to cell A1 and then Pasting Special worksheet 2006-07 which has external links. Is it possible to create a looping macro that refers worksheet("BUs") which list all business units I need to run and save? Range(A1) needs have a looping macro that refers worksheet BUs and then automatically saves files without manually changing cell references.
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
I have the following columns and rows that I need to MOD by 15. Once they have been MOD, I need to set a range and find all numbers in that range of say, eg; all number between 9.6 and 9.8. Really hope someone can help, have been working on it day and night. I can do them one at a time, but is very time consuming. Is there a formula that will do the whole worksheet in record time?
2/18/1975, 156.7519, 175.8083, 235.4675, 253.765
4/11/1973, 237,7642, 346.5342, 113.3145, 321.435
5/12/1985, 342.7625, 123.4233, 253.4321, 357.234
etc.
etc.
etc.
I have a table of financial data based on individuals contributing to a non-profit by year over 6 years.
I am looking for assistance in determining the first year of contibution, the last year of contribution and also the gap year if any of giving.
I am trying to find a specific value if the cell falls in between a certain range. Currently I am using a nested if statement to find this value but would like something easier to work on. I am trying to find the MAV based on weight. Currently this a formula that I am using.
[Code] .....
Attached is part of the table it is drawn from.
mav.jpg
Is there an easier way to do this? I want to have a value in a cell of say 100 g and that would return an MAV of 7.2 g.