Looping To Select A Range
Mar 1, 2007
My ultimate goal is to have some rows of data and and checkbox with each row. I will have a button that will copy only the rows that are checked and paste them into a new worksheet. With the help of some other posts on this site, I was able to figure out how to loop through the checkboxes and copy and paste some data. The problem is I am only copying and pasting in the same rows. I need to know how to move on to the next row that is checked, which is not always the very next row. Here is what I have so far:
Dim i As Integer
For i = 1 To 26
If ActiveSheet. OLEObjects("CheckBox" & i).Object.Value = True Then
Worksheets("Master"). Range("B8:J8").Select
Selection.Copy
Sheets("temp").Select
Worksheets("temp").Range("A8").Select
ActiveSheet.Paste
Sheets("Master").Select
End If
Next
View 3 Replies
ADVERTISEMENT
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Apr 25, 2007
writing a macro that will look to cell A15 on a worksheet "A", decide how big a range is (which is in contiguous cells beneath it - i.e. A20), then select the value of each cell and paste it into a cell in worksheet "B" (for example, if the macro decides the range is 3, then A15 = 1, it would copy and paste that onto the next workbook, then go back to A16 and get that value, paste it into the next workbook, etc). The range will vary in size.
View 9 Replies
View Related
Jun 16, 2014
I have a 2 X 44 range of text cells in one worksheet. The first column includes the same array of variables that are found on a second worksheet. In the second worksheet I want to run a looping vlookup to check if the column in the second worksheet is empty, if it is not I want it to lookup the element in that column in that row from the first worksheet and return the 2nd column item to the adjacent column in the second worksheet.
When I run my program in its current form two problems happen. The first row in the range of the column I want the data returned in is empty, and for the rest of the rows the same value is returned, when it should in fact vary. I think part of the problem is that in my vlookup my entries are:
vlookup(CrudeType, Range("Sources"), 2, false) where crudetype is defined as Range("c2:c" & lrow). This is the C column on the second sheet, I want my output in the D column. Range("sources") is on the first sheet and covers D2:E45.
[Code]....
View 4 Replies
View Related
Nov 2, 2012
I have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
View 8 Replies
View Related
Jul 2, 2013
I am looping through a selected range. The code searches through column B and finds any data. If found, it returns the value to a different workbook to column B. When there is no more data, it goes to column C and does the same thing. My problem is, when there is no data in a column it returns a blank. How do i get rid of this blank???
View 1 Replies
View Related
Aug 28, 2013
Question: I have a VBA code that transpose every 7th row of a dataset in column A only, however I would like for the code to extend the transpose to (7 row and 3 cloumn).
This is the code:
Sub Transpose()
Dim A() As Variant
Dim i As Long
[Code].....
View 1 Replies
View Related
Feb 23, 2014
I have a range of cells in F2:F30000 that I want to round to the nearest whole number.
How can I do that to the entire range of cells without looping? Every search I perform on the topic has a loop of some kind as a solution and my data set could be over 100k rows and speed is already a concern with the workbook.
View 2 Replies
View Related
Feb 6, 2008
I have 10 ranges that if the value in a cell falls into one of those ranges, a calculation needs to occur. I think I need to use a macro which i have set up to run off a button click, with a do loop in it, but not sure how to get the loop to move down the range?
for example:
Cell Reference(s):
D
1 250
2 700
Range:
A B C
1 0 150 75
2 150.01 300 125
3 etc.. etc.. etc..
Formula:
=if(and(d1>a1,d1
View 9 Replies
View Related
May 4, 2009
As a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column:
apples,
pears,
apples,
oranges,
xyz,
oranges,
xyz,
xyz,
xyz,
apples,
apples,
apples,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
etc.
I need to select the twelfth cell in this column, highlighted red.
I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
View 9 Replies
View Related
Feb 6, 2014
I am having trouble looping through a range and inserting a formula where a condition is met.
My range is "h9:i"
My current code inserts a formula in column i when there is a value in the adjacent row in column h:
[Code] .....
However, because there are so many rows (12,000+) it is taking a considerable length of time to run.
Some of the cells in column i will already contain the relevant formula, so to speed this up I want to insert the formula in column i only when the cell value (in column i) is not null, as opposed to inserting it for all cells within the range.
I know how to loop through the range, but the problem is the 'H9' cell reference in the formula in the code above will need to change depending on what row it is being inserted into- so if it is going into "i31" this will need to be "h31".
View 7 Replies
View Related
Feb 16, 2010
i m looping through each cell in the range A5:G11 and deleting the last part, "',[ABSMacro.xlsm]Region Breakdown'!$S$1:$S$64999" of the formula in each cell.
View 2 Replies
View Related
Nov 6, 2009
I have about 20 different workbooks and i want to create identical tables and graphs in each one of them using the least number of steps.
The number of the rows changes by workbook but the colums are identical. So the range will vary by workbook.
so for example:
workbook1=
name sales
a 10
b 20
c 30
workbook2=
name sales
a 10
So I want a macro that does the tabling and charting in workbook1 and automatically moves to workbook2 and so on.
View 9 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Oct 4, 2007
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
View 9 Replies
View Related
Jun 24, 2013
I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model
[Code]....
View 5 Replies
View Related
Mar 8, 2007
Sub New_Book()
Sheets("2006-07").Activate
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
ActiveSheet.Paste
Application.CutCopyMode = False
Sheets("2006-07").Activate
Range("A1").Select
Sheets("2006-07").Select
Range("b3").Select
ActiveCell.FormulaR1C1 = "=R[-2]"
Dim ThisFile As String
Const MyDir As String = "C:"
With ThisWorkbook
ThisFile = .Worksheets("2006-07").Range("b3").Value
. SaveAs Filename:=MyDir & ThisFile
End With
ActiveWorkbook.Save
End Sub
The above VBA works by saving a copy of existing Workbook by refering to cell A1 and then Pasting Special worksheet 2006-07 which has external links. Is it possible to create a looping macro that refers worksheet("BUs") which list all business units I need to run and save? Range(A1) needs have a looping macro that refers worksheet BUs and then automatically saves files without manually changing cell references.
View 6 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Jan 6, 2010
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies
View Related
Jan 27, 2012
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
View 8 Replies
View Related
Mar 26, 2013
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies
View Related
May 29, 2009
I know I'm not too bright, but I've really lost it here. Can someone give me the sintax to select all cells between two names: Start thru End
View 5 Replies
View Related
Sep 14, 2008
if my excel file data in column a:h, and in column a is date data in every day. i try to know how to write vba code in the case of selection data by the date, that i want to select for any propose (copy or printing). eg. date data "dd/mm/yyyy" when i put it to input box
View 11 Replies
View Related
Dec 29, 2008
I'm trying to select a range of dates, contiguous from "AZ2" until the last entry using the following lines. The last cell in the column is selected instead of the entire range of dates from "AZ2" until the nth cell. I'm using Excel 2007. Below are the lines I'm using:
View 3 Replies
View Related
Mar 26, 2009
I know I've seen the syntax for this before, but have done multiple searches and for the life of me I can't find it. Here's what I'm wanting to accomplish. In my spreadsheet I have hundreds of rows of data. Columns E thru G of this data contain numbers, and I must insure they are formatted as such. To do this, I simply put a "1" in an empty cell, copy it, then select the range I want to format, paste special, choose values and multiply.
Easy enough, but when I try to do it via macro I get a bunch og "0" in the empty cells. I can't find how to select only the used rows in those columns. Here's an example of what I've got.
View 2 Replies
View Related
Sep 18, 2009
i basically need to print out the attached sheet in a particular way as shown on sheet 4
However the problem occurs because the printarea can vary
i.e first page will consist of the the range a1:J ......
View 14 Replies
View Related
Apr 27, 2007
I'm trying to select a range (it will vary everytime) using this:
Range("A15").Select
Range(Selection, Selection.End(xlDown)).Select
That will salect the entire range, but I need every but the last row of the range.
View 7 Replies
View Related
Jul 28, 2014
Set Rng = WS1.Range("C10:C8000")
i need to set the Rng where column AM, from cell 10 to the and of list, contain the string "85", is possible without to loop all value in sheets column AM?
View 1 Replies
View Related
Jul 3, 2009
I am trying to do is (see attached) have a dropdown with rating of 1 to 5, Col C. A Salary is in Col B. When a perfomance rating has been selected, the increage %age must be picked up according to what salary ragnge the salary falls into, Col D.
View 2 Replies
View Related
Jul 31, 2014
My question is - for a Ref range in the user form, I want to set it up to only be able select from column A B and C. ( it has select ABC column at the same time, if missing any column, error message will come out, or select out of this range, the error message should also come up. )
I know how to set the range to all three columns, but I know don't how to ask for " must select from all three column?"
View 2 Replies
View Related
