User Form Frames Hindering Textbox Text
Oct 21, 2009
I have a question regarding frames and textboxes on a user form.
I have a user form that has a number of textboxes populated from the results two Comboboxes.
I decided to group some of the textboxes in frames for more logical viewing.
I grouped the textboxes, moved them, placed two frame controls on the form then, finished by replacing the grouped textboxes. No code was altered or added.
When I ran the form, only the Comboboxes were functional and the text boxes were blank.
There were no runtime errors or compile problems.
View 5 Replies
ADVERTISEMENT
Feb 22, 2010
I have a UserForm that utilizes the Change event of a Textbox.
The form goes through some validating before any calculations happen.
My problem is if the user wishes to backspace, clear or perform any changes to this textbox, it bugs out.
Here's the
View 6 Replies
View Related
Feb 9, 2007
File attached
1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine
2) I have a second form which should do 2 things:
a) On the bottom half of the form, select people from sheet 'Staff'. Works fine
b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well
The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine
View 4 Replies
View Related
Aug 13, 2008
I want one procedure that will validate the CURRENT textbox (not named by name, to allow for the procedure to be included in the change event of several different textboxes), to see if it is numeric (decimal places allowed) in Excel 2007.
I followed the instructions here: {url}, which describe exactly what I want to do. So I put the final procedure listed on that page (the dynamic validation code) into the private module of the user form object as listed below:
Private Sub pipes_Change()
OnlyNumbers
End Sub
Private Sub OnlyNumbers()
'This procedure checks to see if the value
'of the current textbox is a number or not
If TypeName(Me.ActiveControl) = "TextBox" Then
If Not IsNumeric(.Value) And .Value <> vbNullString Then
MsgBox "Sorry, only numbers are allowed."
.Value = vbNullString
End If
End With
End If
End Sub
I then ran the form and typed a number into the "pipes" textbox that had been validated. A compile error is thrown: "Invalid or unqualified reference", highlighting the ".Value" portion of IsNumeric. I tried to remove certain parts of the code, such as the IF statement and the "And .Value <> vbnullstring", but nothing works. I have a feeling it is because this code was created for Excel 2003 (though I'm not certain).
View 7 Replies
View Related
Nov 6, 2006
how to rotate a label to a 45 degree angle on a user form.
View 9 Replies
View Related
May 10, 2007
How do I define the variable in a text box so that it stays in that text box after the close of the dialog box. For example, I enter "Test" in TextBox1 then close UserForm1. I want to be able to open UserForm1 back up and still have the same user defined text in there.
View 9 Replies
View Related
Jun 12, 2008
I recently created a userform. I want the data to be placed into the leftheader, centerheader, and rightheader of the document after the user fills in the required fields. I have made the userform, and I can make the code for it to place one item on my userform in the left, center, or right headers. However, when I try to place more than one item in any of the headers excel deletes the first item and overwrites it with the item that is listed last in the VBA code for that respective header. I am new to VBA (this is actually my first program) so I do not know how to make the first value stay there and simply have the next value placed on the line below it.
View 13 Replies
View Related
Sep 22, 2007
I have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.
View 3 Replies
View Related
Jun 13, 2009
I have a user form with 4 text boxes and a command button. I have no problem looping through the textboxes to retrieve the value, but what is the best way to detect if any duplicates exist between the four text boxes? For example, in the command button's
If textbox one's value is "test" and textbox four's value is also "test", it should throw an exception. If a question like this has already been answered, a link to that post would surely suffice.
View 2 Replies
View Related
Sep 23, 2009
I am trying to create a user form to edit some named ranges. The VBA user form designer is basically the same as Borland Delphi, so building the form itself was easy. What I can't figure out is how to populate the user form with the data from the spreadsheet.
I have a number of text boxes on the form with names like txtTier1Slots, txtTier1Ceiling, txtTier1Floor, etc up to 4.
I have a defined name that corresponds with each item, Tier1Slots, Tier1Ceiling, Tier1Floor, and so on. I'm using defined names because they're referenced in Conditional Formatting on one of the worksheets in my project. They don't exist as actual cells, just name references.
I want to get the form populated with those values. I've tried about twenty variations of the following code, using ThisWorkbook, Workbooks, Cells, Range, Name, and just about every cell reference method I can think of. I've so many different error messages, my head is spinning.
View 6 Replies
View Related
Jan 22, 2010
I have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").
The first line of my macro is:
View 2 Replies
View Related
May 1, 2008
I have a user form which includes some text boxes (txtRUL.text for example) where I want to enter a number as a percentage. I divide the number entered by 100 to avoid Excel automatically multiplying by 100 and the result is displayed in the user form as the correct percentage.
Private Sub txtRUL_AfterUpdate()
EnableSave
txtRUL.Value = Format(txtRUL.Value / 100, "0.0%")
(I'm sorry I cant figure out how to format this code as code in this post)
This works well, trouble is when I save and it writes the results to the worksheet, the numbers in the user form revert back to plain unformatted non percentage numbers (ie 5% goes to 0.05)
View 9 Replies
View Related
Dec 15, 2009
I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.
It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.
View 9 Replies
View Related
Mar 31, 2009
If it is how do I convert the user input for the text box field as number. thx
View 3 Replies
View Related
Jun 3, 2006
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
View 7 Replies
View Related
Feb 9, 2010
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
View 2 Replies
View Related
Jan 14, 2009
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
View 3 Replies
View Related
Dec 2, 2008
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
View 9 Replies
View Related
Oct 25, 2007
I have a spreadsheet with the following headings:
A
Claims Number
B
Name
C
Scheme
D
Admin
E
Date
I need to create a user form that will "pop up" and ask the administrator to enter the above details.
A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered
View 9 Replies
View Related
Feb 24, 2009
I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.
I have this code so far but it is not working.
Private Sub cmdSubmit_Click()
Dim Month As Variant
Month = Me.cmbMonth.Value
ActiveWorkbook.Sheets(Month).Activate
I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.
View 9 Replies
View Related
Jul 4, 2009
I have a form set up with excel (2003) using vba. I'm doing a check to see if textbox1 is empty, if it is, a msgbox pops up with a warning that "textbox1 needs to be filled out". I click OK and the cursor goes to textbox2. I want the cursor to return to texbox1 without user intervention but can't figure out how. I'm using "Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)".
I know it can be done because I did it with vba Access, but I can't seem to find it using vba Excel.
View 8 Replies
View Related
Aug 30, 2007
I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.
Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.
View 14 Replies
View Related
May 25, 2008
I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.
View 11 Replies
View Related
Jun 22, 2009
I have created a multi utility user form that user can initialize by a shortcut key. The problem if user want to see the content on sheet or want to change the active cell, he has to close the form and then do any action. This form is initialized by a command and default included in excel as a Add-in. Is there is any way to make the form floating i.e. user can manipulate the data and can see the form as well.
View 4 Replies
View Related
Jul 8, 2009
On a userform, I have 5 paragraphs of text that the user needs to read. The problem is the user can't see all 5 paragraphs, the user is only able to see about two paragraphs. I don't want to make the userform larger but I would like to add some type of scroll bar that would allow the user to scroll up and down to view all of the text.
View 7 Replies
View Related
Dec 20, 2009
Can anybody help me with a code that shows a comment within the user form when specific a checkbox is selected?
I am attaching a sample file with user form containing 6 checkboxes. I need when Name6 is selected, a comment "Test" to appear inside the user form beside the checkbox.
View 6 Replies
View Related
Apr 6, 2007
I have created a user form (thanks Datsmart), and now need to place the data that will be inserted in that userfom onto my spreadsheet.
The spreadsheet will have 50 rows, each containing a different project. There will be a button on each row to activate the user form for that specific row. They click the button on the spreadsheet, and the user form opens. They enter the data on the user form, and once they click the "add comment" button on the user form, the data should be entered in the last cell of the row on which the button is located.
Now the complicated part:
The users will use that for to update the project from week to week, but each week's comment needs to go in the same cell, but above the previous comment.
IE:
Week 1
Jan 1: Project lauched
Week 2
Jan 6: Project budget submitted
Jan 1: Project lauched
Week 3
Jan 22: Budget approved
Jan 6: Project budget submitted
Jan 1: Project lauched
The date being the date from the user form, and the comment being the comment from the user form. If the latest date can be bolded that would be a bonus.
They each have to go in the same cell cause all relate to the same project. This same thing will be repeated 50 times for each different project.
View 9 Replies
View Related
May 24, 2007
I came here yesterday asking for help and was helped immediatly, but I have another question/problem. I got my user form up and running, however I've just been informed that the form has to be able to be printed out. So basically I need this user form with all the data on it and I need it to be printed.
Is there a way to add a command button perhaps that prints out the form with the data on it? (Ex: Imput Data, hit Print command button, have an electronic and hard copy of the information)
View 9 Replies
View Related
Oct 16, 2007
I have a user form with 2 textboxes (used as parameters for an ODBC query). The entry should be a period, as yyyymm. How can I check, for instance when clicking the Ok button after entry, that both textboxes are of the "000000" format and the last 2 numbers are between 01 and 12?
View 9 Replies
View Related
May 10, 2009
I have the following code in a user form....
Private Sub cbSearch_Click()
Dim Product As Range
Set Product = Sheets("Master").Range("A1:A300").Find(Val(tbLookFor), lookat:=xlWhole, LookIn:=xlValues)
If Product Is Nothing Then
MsgBox "Incorrect Product code, try again"
Else
'Populate the userform with data
Dim counter
counter = (0) + 1
Label35 = counter
tbData1 = Product.Offset(0, 1) 'Down 1 row, over 1 column
tbData2 = Product.Offset(0, 2)
tbData3 = Product.Offset(0, 3)
tbData4 = Product.Offset(0, 4)
etc, etc, etc
I need the counter to increase every time a search is performed, at the moment it only does one count, no matter how many searches are performed.
What do I need to add to the counter part of the code for it to increase by 1 every time?
View 9 Replies
View Related
