Looping Through All Sheets Not Working

Feb 21, 2014

I have a macro to loop through all the sheets in a workbook and apply a filter in column C. the filter is by Date and all sheets have the exact same format. For some reason the macro will go through the loop but not change to the next sheet. The message box line however does go from sheet to sheet.

[Code] ......

I attached a 2 tab work book example. When i run the program, it only applies it to Sheet 1.

Attached File : Filter_Example.xlsm‎

View 3 Replies


ADVERTISEMENT

Worksheet Looping Not Working

May 15, 2012

I pulled to follow code off the Microsoft site.

[URL]....

The problem I'm having is that the code isn't actually looping through the workbook - it's replaying over and over again on the same worksheet. I figure this is an easy fix but this figure is as useful as dog clues to ants.

Sub WorksheetLoop2()

' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets

A bunch of page formatting. Unmerge, cut, paste etc.

Next
End Sub

View 9 Replies View Related

Looping Through Sheets And Creating Charts?

Jun 18, 2014

I have following code which is not behaving the way I want.

[Code] ....

The problem is the last statement, a chart which gets created in an iteration does not "move" to a new sheet but rather same sheet. So end result is a sheet with chart of the last iteration.

How to get this code to create new charts in new sheet and not the same sheet.

View 3 Replies View Related

Looping Through A Workbook With Sheets And Charts

Jun 30, 2009

I'm trying to go through a workbook and, based on some user inputs, hide certain sheets and charts (these charts are their own tab, i.e. a chart object). Here's a sample code I wrote for a dummy workbook I have. Unfortunately it doesn't work, I think because the loops are nested. However if I can figure out how to fix this code I can easily adapt it to my other real problem.

View 2 Replies View Related

Apply Subroutines - Looping Through Sheets

Sep 28, 2012

I'm trying to apply subroutines that I wrote to all sheets in a workbook before a save but it's only applying them to the active sheet.

Here's my code:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim ws As Worksheet
For Each ws In Worksheets
color
Formatting
Next ws

End Sub

View 3 Replies View Related

Looping Through Sheets To Update Pivot?

Mar 13, 2014

I don't know why i'm having such trouble with this. I keep getting "Invalid Call or argument". All i need is to loop through sheets 2 to 9 and set the year of 8 pivots per sheet to 2005.

View 2 Replies View Related

Looping Through All Sheets, Make Report

Dec 23, 2008

I have a workbook with many sheets, basically all the sheets are almost the same template with fill-in information for different type of jobs, and for the most part, the information is located in the same areas in each sheet.

I need to look in each sheet for a cell labeled, Committee ID:

And then copy it and the cell to the right of it, so for example:

A8 hasCommittee ID:
B8 hasC1234N

So, loop through all the sheets and get these values and then paste them into a new sheet in the same workbook and call that sheet Report. When pasting data into the Report sheet, insert a space between each result.

View 9 Replies View Related

Find,match & Looping Through Various Sheets

Mar 6, 2007

to perform find, if match, ubdate, looping action in various sheets of excel through VB.

Currently, i am working at WAREHOUSE, where not having SAP OR ERP to perform [ maintain ] each & every in & out movement of products. However, i have been using excel to put in values for in & out manually....

View 6 Replies View Related

Looping Through Range Whilst Copying And Pasting To / From Different Sheets?

Jun 24, 2013

I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.

I've tried to start the look through the row of eastings, but it is not working.

Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model

[Code]....

View 5 Replies View Related

Working With Multiple Sheets?

Jun 21, 2013

I have a workbook which has multiple sheets all with the same format.

When I make a change in one sheet it seems to impact another. There cells are not referenced. I have selected all sheets and selected ungroup.

I need to update numbers on individual sheets, i get about 40% done and when I look back all the numbers are now different.

View 2 Replies View Related

Apply To All Sheets Not Working

Mar 10, 2009

why the "apply to all worksheets" portion of this code is not working? I appreciate your time.

Sub Delete_0activityaccount()
'
'
Dim mywSheet As Excel.Worksheet
For Each mywSheet In ActiveWorkbook.Worksheets

lastrow = Cells(Rows.Count, 1).End(xlUp).Row
For i = lastrow To 8 Step -1
If Cells(i, 4).Value = 0 And Cells(i, 5).Value = 0 And Cells(i, 6).Value = 0 And Cells(i, 7).Value = 0 And Cells(i, 8).Value = 0 _
And Cells(i, 9).Value = 0 And Cells(i, 10).Value = 0 And Cells(i, 11).Value = 0 And Cells(i, 12).Value = 0 _
And Cells(i, 13).Value = 0 And Cells(i, 14).Value = 0 And Cells(i, 15).Value = 0 And Cells(i, 16).Value = 0 _
And Cells(i, 17).Value = 0 And Cells(i, 18).Value = 0 Then
Rows(i).Delete
Else
End If
Next i

Next mywSheet

End Sub

View 9 Replies View Related

Excel 2003 :: Right Click Not Working In Sheets

Aug 8, 2014

By chance I have opened a sheet with some macro and after that 'right click' is not working in any of the excel sheets (even newly created ones) in sheet names tab.

i.e., I can't delete/rename/insert etc in any sheet by rightclicking the sheet name.

Even the Edit->'delete sheet' is disabled. However, Insert->worksheet is enabled.

How to make the right click enabled. (excel version 2003)

View 5 Replies View Related

Macros That Were Working In Excel 2003 Are Not Working In 2007

Jan 25, 2010

I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.

Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i

View 9 Replies View Related

Looping For 01 To 10

Aug 8, 2014

I know how to loop for 1 to 10.

But is it possible to loop for 01 to 10?

Like:

[Code] ......

Because I am pulling data from external aplication, so the 0 is fix in a row/column.. I will need to get the row/column for the whole "01" and not only "1".

View 2 Replies View Related

For Next Looping

Aug 18, 2009

I am not sure what I am doing wrong with this expression. I know the code is a little messy, sorry.

View 2 Replies View Related

Looping Without Using VBA

Aug 8, 2009

Is it possible to write a cell formula (not a macro) to loop through a range of cells and test for a value? Something tells me that I need to use the "Offset" function.

View 9 Replies View Related

Looping Through The Last Row

Feb 14, 2010

How do I continue to loop through the last row and get the values to 3 differrent text boxes?

If I remember right, I think the command is Offset, 1 to go to the right one cell correct?

Sub CommandButton1_Click()
'("PowerAnalysis").cells(Row, 3).Value = textbox1.Value
'Worksheets("PowerData").Cells(Row, 3).Value = TextBox1.Value
Set WkSht = Worksheets("PowerData")
LastRow = WkSht.Range("A" & Rows.Count).End(xlUp).Row

WkSht.Cells(Row, 1).Value = TextBox1.Value

'LastRow = r
'r = ActiveCell
'Dim r As Long
'r = ActiveCell.Row
'UserForm3.Show

'WkSht.Cells(Row, 3).Value = TextBox1.Value
UserForm3.TextBox1.Value = r

End Sub

This code is wrong, but how can I get the first three records on the last row to display in three textboxes on UserForm3 titled TextBox1, TextBox2 and TextBox3.

Norie may be right, I may not have to even think about using repaint.

View 9 Replies View Related

VBA Looping

May 21, 2006

I have created a spreadsheet used for timber design. The spreadsheet calculates whether a specified size of timber column will support a specified load under certain conditions.

The various conditions include, load duration, service class, strength class and limit states.

Ok at the moment the user specifies the load and length of the column, then chooses a size of timber and sets the conditions mentioned above. Once this has been done the calculations i have put together on another sheet, work out whether the size of timber can support the specified load.

It is important to know that the answer for the final strength formula of determining the strength of the column should be equal to or less than 1. If this is the case then the column is ok, if the answer is larger than 1 then the column isnt safe.

Also at various points within the calculation certain checks are required to make sure certain design values satisfy certain criteria. If they dont then a new size of timber sould be tried.

What i would like to be able to do is use a loop so that the spreadsheet will use differing sizes of timber and calculate the values that satisfy the criteria and eventually find the size of timber required. The final answer of the strength calculation should be as close to 1 as possible but not over.

View 8 Replies View Related

Looping In Vba

Nov 5, 2006

My code is supposed to generate figures to plot the changes in a riverbed profile with time. At time zero, there is a main subroutine that goes through a number of Subroutines and iterations before ending. At time t, I have another main subroutine which is slightly different but would go through most of the subroutines of tine zero. I want the code to go through for time t=0, display the values and then go through the other loops as well, displaying the values for each loop. I thought I knew what I was doing, but the displayed results showed reasonable results for the first (time zero), but the others were just replicas of the same thing. Is there anyway I could use variables with vectors i.e patty(j,i), where i could run the loop for i, and then do Next j.

View 4 Replies View Related

Working Day Function: (Day + Next 1st Working Day)

Aug 27, 2009

I was looking for a final result as follows

21-Aug-09 + 1 = 24-Aug-09 (Day + next 1st working day)

21-Aug-09 + 3 = 26-Aug-09 (Day + next 3rd working day)

View 2 Replies View Related

VBA For Looping Through Rows?

Feb 8, 2013

I have the below code which converts a range to PDF and saves it on our network drive. I would like to change my code to a loop so I don't have to do so much typing. There are 68 rows between each range.

VB:
Sheets("CPS CSR Dashboards").Range("A2:K69").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M3] & ".pdf"
Sheets("CPS CSR Dashboards").Range("A70:K137").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M71] & ".pdf"

A2:K69 is the range for Agent 1 which will be saved as as a PDF M3 is the cell which contains Agent 1's name for which the file is to be named.

A70:K137 is the range for Agent 2 which will be saved as another PDF M71 is the cell which contains Agent 2's name.

View 1 Replies View Related

VBA - Looping Through Different Columns

Jul 6, 2013

I am trying to code something that will loop through a given set of columns. I know that if I say "For each C in R", that would mean, looping through each cell inside the Range "R", but what I want is something like this:

VB:
Dim rzRng As range, rzSmallRng As range
Set rzRng = Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))

For Each rzSmallRng In rzRng
statement here...
Next

(I have a total of 30 columns that I need to put inside that Union function) . And then loop through the range as a whole set (not though each cell of that range).

I also tried the following code:

VB:
With Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
statement here....
End With

But it ended up executing the code in Range"A:A" only.

View 8 Replies View Related

Looping After Every 121 Cells

Mar 19, 2014

I have to manually drag my formula for 121 cells and then change the formula by next column and/or row number.

Currently the 2 formulas I have are:

=IF(AND($Z$4>="", $AA$4>=""),H$6,J2456)

=OFFSET(X$5,0,(ROWS($1:1)-1)*2)

After every 121 cells that I drag these formulas to, in the first formula I change from H$7 to H$7 then H$7 then H$7 and so on

In the second formula, I change from X$5 to X$6 then X$7 then X$8 and so on.And also change the ROWS from 1:121 back to 1:1

Is there a formula which I can drag and it automatically changes the column and cell reference in the 2 formulas?

View 6 Replies View Related

Looping Through ListObject?

Apr 11, 2014

I am looking to create a loop in a ListObject object that does calculations depending on the value of the current certain row in a column. This is the code I have so far:

[Code]....

I am having trouble with the loop; as you can see, the nested for loop will go through all the 'weight' in the column before going to the next 'grade'. I just want the loop to reference the same 'weight' that the 'grade' is on and move on. But I am not sure how to reference each 'weight' as I progress through each 'grade' in parallel.

I am aware that I can do this with regular cell references:

[Code] ......

but I am more interested in learning on how to work with the ListObject class.

View 2 Replies View Related

Looping Code

Apr 28, 2007

I am using the following code in a project and would like some help to loop it until either TRUE or #N/A is found in the active cell.

View 9 Replies View Related

Looping/end On Blank

Dec 2, 2008

so i've got a spreadsheet that i'm working on that i'm doing some automation for and i'm not sure where to go from here. i don't know too much about coding, but pick up a little here and there.

so what i have is 2 spreadsheets that i'm using to compare data and copy and paste the information found. there is a list of data in column E that i am copying and pasting into the "timestamp log" which has a macros that search for a variable in that workbook, if the variable is found the cell is copied. then "advisor info1" is activated and pasted in column H.

now i'm trying to avoid having to write the below coding for each and every cell in column E that has data to be found. is there a way to loop the process until a blank cell is found? like to have it search cell e2, e3, e4, e5... etc until it hits a cell with nothing in it? sometimes i have over 1000 cells in column E that i need to search through and trying to copy and paste out the below information 1000 times is very tedius and a waste. anyone have any ideas?

i'm not sure if i explained it clearly enough, let me know if you need a little more clarification .......

View 9 Replies View Related

Looping With Two Conditions

Mar 8, 2009

I have a formula in cell A1 and text in either cell B2 or C2. This text continues down the rows until there is no text in either columns B or C. I wish to copy the formula in A1 into A2 and then continue copying down column A until both cells in column B and C are empty. What is the excel VBA code?

View 2 Replies View Related

Looping Through Day Of Week

Mar 17, 2009

I'm trying to set up a simple macro to loop through some number of dates on a sheet and blank out fields next to every instance of Saturday and Sunday. The only problem I'm having is actually finding the values "Saturday" and "Sunday"

Given a date in this format: 01/01/2009
I can convert to "Thursday"

Problem is, the vba code still "sees" 01/01/2009

I've tried copy / paste special / paste values to no avail.
I've tried changing it via VBA (a few different methods, including strings, formats, etc) with no luck. Even tried referencing my date cells from another spreadsheet and pasting the values back in. Can't seem to get 01/01/2009 to be "Thursday"

View 4 Replies View Related

Looping Through A Column ..

Sep 24, 2009

I have a macro that seems to get bogged down during a replace function because sometimes there is no need to replace. I figure I need to loop this and cannot figure out how to do it.

I have the code below and need to know how to loop this ....

View 10 Replies View Related

Looping Put Into A Macro

Nov 2, 2009

Aloop I am trying to put into a macro. I have a variable range of data in Column C, header is in C1. I need to split the data in each row of the array using this code.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved