I had create a few macro with the macro name the same as the worksheet name.
How can i create another macro to loop through all the worksheet and if there is any data in Cell A1, it will call the corresponding macro. If there is no data, it will go onto another worksheet.
how I can go back to the worksheet I was in before I branched off to work in another worksheet via a macro?
I know you can tell the macro which worksheet to go to, but not sure how to get vb to remember where I was and return to the same sheet (or even cell).
This macro works when there are only a small number of worksheets in a workbook. But as soon as it increases to say 20 or above worksheets, the macro keeps looping without coming to the end of the last worksheet.
Sub LDK_Print_Orientation_New()
Dim intOr As Integer
Dim wkscount As Integer
wkscount = ActiveWorkbook.Worksheets.Count
For x = 1 To wkscount
Worksheets(x).Select
Application. ScreenUpdating = False 'Switches off screen updating and calculations
x = MsgBox("Print in Portrait", vbYesNo, "Printing Choice")............
Sub New_Book()
Sheets("2006-07").Activate
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
ActiveSheet.Paste
Application.CutCopyMode = False
Sheets("2006-07").Activate
Range("A1").Select
Sheets("2006-07").Select
Range("b3").Select
ActiveCell.FormulaR1C1 = "=R[-2]"
Dim ThisFile As String
Const MyDir As String = "C:"
With ThisWorkbook
ThisFile = .Worksheets("2006-07").Range("b3").Value
. SaveAs Filename:=MyDir & ThisFile
End With
ActiveWorkbook.Save
End Sub
The above VBA works by saving a copy of existing Workbook by refering to cell A1 and then Pasting Special worksheet 2006-07 which has external links. Is it possible to create a looping macro that refers worksheet("BUs") which list all business units I need to run and save? Range(A1) needs have a looping macro that refers worksheet BUs and then automatically saves files without manually changing cell references.
The below example creates a new worksheet and tries to get the new worksheets codename. The problem is when I run the code, I can't seem to be able to pull the codename from the newly created sheet (ie Cell A1 = "" instead of "sheetx").
Sub test()Set mysht = ThisWorkbook.Worksheets.Add x = mysht.CodeName mysht.Range("A1") = xEnd Sub
I have a User Defined Function (for finding the next minimum value in a range) that is not working for nonconcurrent ranges when called from within a worksheet. It returns #VALUE!
This works: =nextmin(A11:A17)
This does not work: =nextmin(D13,E13,F13,F16)
However calling the function from within vba works:
Is it possible to use the Worksheet_Change command to monitor 2 different cells in the same worksheet and call a different procedure depending on which cell is changed. i.e. if cell A1 is changed do this, if cell a2 is changed do that
View 9 Replies View RelatedI have created an XLA using a blank workbook which has a macro (called CompareMan) I have written within it.
I have written a utility (called INSTALLMAN) to install this add in.
When I run the install it creates and activates the add in OK.
The install also creates a toolbar with a button to trigger the macro.
Problem is, when I click the newly created button, no matter which workbook I am currently in I get a message ...
"The macro INSTALLMAN.xls!CompareMan cannot be found".
So my question is, how do I get my button to trigger the macro in my add in?
I am trying to call another macro, but instead of using the name of the macro, I have it in a variable. I am getting an error that says "Compile Error: Expected sub, Function, or Property." Can you call a macro that is in a variable? I basically have a bunch of macros created. I also have a list of the name of those macros on a worksheet in Excel. I want excel to start at the top of the list in excel and run the macro, then move down and run the next macro, and so on. Below is my code.
Sub Commercial_2005()
Dim Macroname As String
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
Cells.Range("a1").Select
While ActiveCell.Value <> ""
Macroname = ActiveCell.Value
Workbooks("copy of recast_Report_v2.xls").Activate
Call Macroname
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
ActiveCell.Offset(1, 0).Select
Wend
End Sub
I have a set of eight files, each of which is refreshed daily through a macro. I wanted to set up a master macro in a separate file that would open up each of the eight in turn, calls its refresh macro (which saves and closes the workbook), and then open up the next one, etc. I've searched the board and Help on this subject, but I keep getting an error:
Sub UpdateCSHoldReports()
' A sub to update all the US CS Hold Reports
' First, change the directory to the one that holds the files
ChDir "s:Marketing_ReportsCustomer Service2006CS Hold ReportsUSA"
' Next, open each file in turn, and run its refresh macro
' The refresh macro saves and closes the file automatically
Workbooks.Open ("VERIFICATION HOLDS 1000 PLUS.xls")
Workbooks("VERIFICATION HOLDS 1000 PLUS.xls").Activate
ActiveWorkbook.Sheets(1).Activate
Application.Run ("VERIFICATION HOLDS 1000 PLUS.xls!V1000Refresh")
End Sub
I'm only working on one file right now; I'll add the others when I get this one going. The error message I get is "1004" "The macro VERIFICATION HOLDS 1000 PLUS.xls!V1000Refresh cannot be found." It occurs when the Application.Run statement attempts to execute.
What obvious thing am I missing here? I have checked all the spellings, etc., so it's not something like that.
I'm writing some code in a "control" Excel file that will open a series of other files and successively run some processes. Each of these files has its own unique "refresh" macros, with parameters that vary from file to file.
How do I put code in my "control" file that will, when it opens each of these other files, run the "refresh" macro that is contained within them, and not the "control" file itself?
I have been combining multiple macro's into one large Macro and after research, it seems that only the call function works without any hitches.
Is there a way to use the call feature in one workbook while the macro's themselves, 5 or 6 of them, are in another workbook that is closed?
All users would have access to both workbooks.
The reason I am trying this is because I do not want all the other users to have to choose between multiple macro's and some of my colleagues like to use a radio button to link to the workbook. so it needs to have one file in it...
I have a workbook with two macros that the user can run individually. They unfortunately take a fair amount of time to complete (approx 1 hour each) so I implemented some timing related code that at the end of the macro completion, it notifies them with a msgBox indicating how long it took to run. With that said, I would like to allow the user to run a macro that simply calls the other two so that they can kick it off at the end of the day and they both will be finished by morning. I created a new macro that simply makes a call to each of the other macros individually. The problem is, my msgBox that displays after the first macro completes, waits for "OK" acknowledgement which defeats the whole purpose of being able to run them both via one macro. I have tried to include Application.DisplayAlerts = False prior to calling the first macro but it is not working. Here is an example of what I am trying to do.
Sub runAllMacros()
Application.DisplayAlerts = False
Call compileBookData
Call compileLaborData
Application.DisplayAlerts = True
MsgBox "All Rollup Macros have completed execution."
I have a workbook with a 2 macros "PopulateSheetlist" and "SaveEditedversion"
Normally they are each button operated, and prompt the user with vbYesNo style options. I wanted to write a Macro, say "Macroautomatewkbk that would automatically answer the prompts.
Sub Macroautomatewkbk ()
Call PopulateSheetlist
' Always answer YES or OK to any prompts this macro may offer
Call SaveEditedversion
' Answer No for the 1st prompt and YES for the 2nd prompt
End Sub
MsgBox "Both macros "PopulateSheetlist" and "SaveEditedversion"
' Some error handler here, don't know how this should work exactly.
Could any one please explain how to fill in code in the commented sections in the above sample code?
Edit: I tried recording a macro to do the above, but it only showed the zooming and scrolling that occurred, none of the button prompts being answered.
I pulled to follow code off the Microsoft site.
[URL]....
The problem I'm having is that the code isn't actually looping through the workbook - it's replaying over and over again on the same worksheet. I figure this is an easy fix but this figure is as useful as dog clues to ants.
Sub WorksheetLoop2()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
A bunch of page formatting. Unmerge, cut, paste etc.
Next
End Sub
how would i be able to loop through all controls on a worksheet and see what type of control they are? : D
View 9 Replies View RelatedAt the moment I have a macro that is assigned to a button. When clicked, it creates a newline, create and copy a column in another sheet. This code works fine :
[Code] ......
What I now want to do is make a cell called "Total Number of Sites" and allow user to input data into "D3" manualy. eg if 3 sites, user input 3 in D3 so D3 = 3.
Since total number of sites = 3, Instead of clicking that button I made 3 times, I want to call the macro 3 times using a nother button.
However it doesn't work. This is what I used:
[Code] ..........
I'm hoping there is some way to call whatever text is stored in the "alt text" field of images placed in an excel sheet for use as a variable / string reference in a macro.
The "alt text" will not be changed in any way by the macro.
I've assigned a single macro to numerous Form Checkboxes (not ActiveX). I'd like the macro to be able to identify the Checkbox calling it, so that if for example, if it were fired by clicking "Check Box 41", the macro should know that.
Is this possible, or must I use an ActiveX control?
Using a different script application, I would like to run my VBA macros while working in Excel. I was wondering if I could achieve that using PostMessage or SendMessage calls. Part of the problem is that Excel only seems to allow either Ctrl + letter or Ctrl + Shift + letter as an assignable macro shortcut. My script gives me flexibility in that I can assign any key or combination of keys to trigger any kind of routine, like a PostMessage call, for instance. So while working on my workbook, I might want to press, say, ScrollLock followed by a letter of my choice, followed by another letter of my choice (a sort of super shortcut), resulting in the running of a Macro of my choice in Excel.
View 5 Replies View RelatedI am trying to use a For Next loop to loop through several option buttons on a worksheet in order to set the value of each to false. I cannot seem to get the code right.
View 2 Replies View RelatedI purchased the book VBA and Macros for excel and it has gotten me pretty far in this code, but I am having difficulty with one code though. I want the Macro to run through a specified directory, and copy the contents of the specified cells (9th row to last row) from each file and paste them in the next available space on my master. Then repeat this process for each file in the file directory. So far, it is successfully going through each file, but it isn't pasting it to my master sheet.
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Dim ws As Worksheet
Dim NextRow As Long
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
.LookIn = "K:ESAR GroupForecasting"
.FileType = msoFileTypeExcelWorkbooks
.Filename = "*.xls".........................
I am looking to loop through a folder and open every workbook in the folder. For every workbook I would like to copy a range in a worksheet named "explain" and paste values into a separate file. All in all this separate file would be a consolidation of the information from the individual workbooks.
View 2 Replies View RelatedI have a macro running in a workbook that gathers some data (a date, a string and a few arrays). Towards the end of this macro, I need it to open another workbook and run a macro that sits in this other workbook, using the data from the first workbook. I then need it to return some results (several integers) back to the first macro to be pasted into the first workbook.
I gather that I can't use 'Call' as the second macro is in another workbook.
I've found that I can use Application.Run but I'm unsure how to carry variables back and forth using this.
How to move the variables between macros / workbooks using the Application.Run option, or maybe another way of doing things?
the macro works fine until it executes the paste values. At that point, the macro jumps to the "CountThem" function which is located in another workbook. The data that I am copy/pasting is in no way connected to any cells that are using that function. Although, other values in the workbook are passed down from data that uses that function.
I am still in the dark ages using Excel 2000.
This is the code for my macro.
Code:
Sub Current_to_Raw()
'
' Current_to_Raw Macro
' Macro recorded 2/12/2014 by
'
'
Range("N14").Select
[code]....
I created two macros. One for refreshing the data I pull from a database, and another one adding some formulas I need. On the formulas macro, I don't know how to have it automatically fill until the last row of data to the left of the column with the formula. (Just like if I double clicked it and it filled down automatically). I also tried to combine these two macros, but I get errors and they don't execute.
View 3 Replies View RelatedAloop I am trying to put into a macro. I have a variable range of data in Column C, header is in C1. I need to split the data in each row of the array using this code.
View 2 Replies View RelatedI have a macro (written with the help of forumites here) which, when selecting a cell on a particular sheet, will select and copy data from various rows on various sheets, print a resulting chart, before returning to the original sheet.
Now, I use autofilter on the original sheet to help organise the data I wish to copy and print.
My question: is it possible to adapt my macro so that, once it has run through once, will move to the next cell in the autofiltered column and run the macro again, and again, and again... to the bottom of the autofiltered column?
At the moment, I'm running the macro, pressing the 'down' key and then running the macro again until I've exhausted the column. There must be an easier/better way.
The below code outputs a value in the cell corresponding to alpha by drawing information from the range in issueRng. However it will only grab the value from the first cell in the range of issueRng. It grabs this cell value and outputs it in every cell corresponding to alpha. For instance if i have issueRng as the range from C6 to E6 (3 cells), then the code draws the value of C6 and puts it in the cell corresponding to alpha which for the first loop is Cell(7,6). However the code is putting the value from C6 into every cell instead of moving through the range of issueRng.
Dim alpha As Double
alpha = 6
Dim issueRng As Range
Set wb = ActiveWorkbook
With wb.Sheets("Issues")
Set issueRng = Sheets("Issues").Range(.Range("C6"), .Range("C6").End(xlToRight))
End With
For Each CELL In issueRng...............
I am a bit stuck in looping my macro. I have a working macro that does various functions for a period (say January) and I wish to run for periods 1 to 12. The cell "A1" has a drop down list (jan09, feb09 to Dec09).
Currently I select the month from Cell A1 and run the macro. Now wish to loop this macro so it runs from Jan09 to Dec09 in one go. The cell A1 is being refererence in the Vlookup table that changes ranges in a table that are been used as dynamic ranges in a macro.
Simplied Macro Steps
1. Select month in cell A1 (sheetX), then Calculate.
2.This refeshes lookup table and runs the macro say copies cells (B10:D100) in sheetBud and pastes in sheetTest A10. Insert rows A10:A100. Ends
Currently I manually changes the step 1 and then run this macro for next month. But now wish to run it for 1 to 12 months in one go. Please please can you can help me with the Looping. Please note that the macro does other functions and the steps above are simplied.
