Calling Macro Numerous Times?
Jan 24, 2014
At the moment I have a macro that is assigned to a button. When clicked, it creates a newline, create and copy a column in another sheet. This code works fine :
[Code] ......
What I now want to do is make a cell called "Total Number of Sites" and allow user to input data into "D3" manualy. eg if 3 sites, user input 3 in D3 so D3 = 3.
Since total number of sites = 3, Instead of clicking that button I made 3 times, I want to call the macro 3 times using a nother button.
However it doesn't work. This is what I used:
[Code] ..........
View 5 Replies
ADVERTISEMENT
Oct 12, 2004
I am trying to send 7 different emails in this sub, the sendnotes sub is not recognizing my GOLOOP value
As you can see I stole this code from this site. You all are terrific!
Sub SendFiles()
Sheets("Menu").Select
Range("C23").Select
Filename = ActiveCell.Value
GoLoop = "1"
SendNotesMail
GoLoop = "2"
SendNotesMail
GoLoop = "3"
SendNotesMail
GoLoop = "4"
SendNotesMail...................
View 9 Replies
View Related
Nov 24, 2009
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
View 9 Replies
View Related
Feb 23, 2010
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
View 11 Replies
View Related
Feb 12, 2009
I have created an XLA using a blank workbook which has a macro (called CompareMan) I have written within it.
I have written a utility (called INSTALLMAN) to install this add in.
When I run the install it creates and activates the add in OK.
The install also creates a toolbar with a button to trigger the macro.
Problem is, when I click the newly created button, no matter which workbook I am currently in I get a message ...
"The macro INSTALLMAN.xls!CompareMan cannot be found".
So my question is, how do I get my button to trigger the macro in my add in?
View 14 Replies
View Related
Aug 4, 2006
I am trying to call another macro, but instead of using the name of the macro, I have it in a variable. I am getting an error that says "Compile Error: Expected sub, Function, or Property." Can you call a macro that is in a variable? I basically have a bunch of macros created. I also have a list of the name of those macros on a worksheet in Excel. I want excel to start at the top of the list in excel and run the macro, then move down and run the next macro, and so on. Below is my code.
Sub Commercial_2005()
Dim Macroname As String
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
Cells.Range("a1").Select
While ActiveCell.Value <> ""
Macroname = ActiveCell.Value
Workbooks("copy of recast_Report_v2.xls").Activate
Call Macroname
Workbooks("bleeg.xls").Activate
Worksheets("CommercialList").Select
ActiveCell.Offset(1, 0).Select
Wend
End Sub
View 3 Replies
View Related
Nov 14, 2006
I have a set of eight files, each of which is refreshed daily through a macro. I wanted to set up a master macro in a separate file that would open up each of the eight in turn, calls its refresh macro (which saves and closes the workbook), and then open up the next one, etc. I've searched the board and Help on this subject, but I keep getting an error:
Sub UpdateCSHoldReports()
' A sub to update all the US CS Hold Reports
' First, change the directory to the one that holds the files
ChDir "s:Marketing_ReportsCustomer Service2006CS Hold ReportsUSA"
' Next, open each file in turn, and run its refresh macro
' The refresh macro saves and closes the file automatically
Workbooks.Open ("VERIFICATION HOLDS 1000 PLUS.xls")
Workbooks("VERIFICATION HOLDS 1000 PLUS.xls").Activate
ActiveWorkbook.Sheets(1).Activate
Application.Run ("VERIFICATION HOLDS 1000 PLUS.xls!V1000Refresh")
End Sub
I'm only working on one file right now; I'll add the others when I get this one going. The error message I get is "1004" "The macro VERIFICATION HOLDS 1000 PLUS.xls!V1000Refresh cannot be found." It occurs when the Application.Run statement attempts to execute.
What obvious thing am I missing here? I have checked all the spellings, etc., so it's not something like that.
View 9 Replies
View Related
Nov 19, 2009
I'm writing some code in a "control" Excel file that will open a series of other files and successively run some processes. Each of these files has its own unique "refresh" macros, with parameters that vary from file to file.
How do I put code in my "control" file that will, when it opens each of these other files, run the "refresh" macro that is contained within them, and not the "control" file itself?
View 9 Replies
View Related
Nov 26, 2009
I have been combining multiple macro's into one large Macro and after research, it seems that only the call function works without any hitches.
Is there a way to use the call feature in one workbook while the macro's themselves, 5 or 6 of them, are in another workbook that is closed?
All users would have access to both workbooks.
The reason I am trying this is because I do not want all the other users to have to choose between multiple macro's and some of my colleagues like to use a radio button to link to the workbook. so it needs to have one file in it...
View 9 Replies
View Related
Jan 9, 2012
I have a workbook with two macros that the user can run individually. They unfortunately take a fair amount of time to complete (approx 1 hour each) so I implemented some timing related code that at the end of the macro completion, it notifies them with a msgBox indicating how long it took to run. With that said, I would like to allow the user to run a macro that simply calls the other two so that they can kick it off at the end of the day and they both will be finished by morning. I created a new macro that simply makes a call to each of the other macros individually. The problem is, my msgBox that displays after the first macro completes, waits for "OK" acknowledgement which defeats the whole purpose of being able to run them both via one macro. I have tried to include Application.DisplayAlerts = False prior to calling the first macro but it is not working. Here is an example of what I am trying to do.
Sub runAllMacros()
Application.DisplayAlerts = False
Call compileBookData
Call compileLaborData
Application.DisplayAlerts = True
MsgBox "All Rollup Macros have completed execution."
View 5 Replies
View Related
Apr 20, 2008
I have a workbook with a 2 macros "PopulateSheetlist" and "SaveEditedversion"
Normally they are each button operated, and prompt the user with vbYesNo style options. I wanted to write a Macro, say "Macroautomatewkbk that would automatically answer the prompts.
Sub Macroautomatewkbk ()
Call PopulateSheetlist
' Always answer YES or OK to any prompts this macro may offer
Call SaveEditedversion
' Answer No for the 1st prompt and YES for the 2nd prompt
End Sub
MsgBox "Both macros "PopulateSheetlist" and "SaveEditedversion"
' Some error handler here, don't know how this should work exactly.
Could any one please explain how to fill in code in the commented sections in the above sample code?
Edit: I tried recording a macro to do the above, but it only showed the zooming and scrolling that occurred, none of the button prompts being answered.
View 9 Replies
View Related
Aug 19, 2009
I'm hoping there is some way to call whatever text is stored in the "alt text" field of images placed in an excel sheet for use as a variable / string reference in a macro.
The "alt text" will not be changed in any way by the macro.
View 10 Replies
View Related
Nov 21, 2007
I've assigned a single macro to numerous Form Checkboxes (not ActiveX). I'd like the macro to be able to identify the Checkbox calling it, so that if for example, if it were fired by clicking "Check Box 41", the macro should know that.
Is this possible, or must I use an ActiveX control?
View 9 Replies
View Related
Jan 6, 2009
how I can go back to the worksheet I was in before I branched off to work in another worksheet via a macro?
I know you can tell the macro which worksheet to go to, but not sure how to get vb to remember where I was and return to the same sheet (or even cell).
View 9 Replies
View Related
Jan 13, 2010
I had create a few macro with the macro name the same as the worksheet name.
How can i create another macro to loop through all the worksheet and if there is any data in Cell A1, it will call the corresponding macro. If there is no data, it will go onto another worksheet.
View 9 Replies
View Related
Oct 4, 2006
Using a different script application, I would like to run my VBA macros while working in Excel. I was wondering if I could achieve that using PostMessage or SendMessage calls. Part of the problem is that Excel only seems to allow either Ctrl + letter or Ctrl + Shift + letter as an assignable macro shortcut. My script gives me flexibility in that I can assign any key or combination of keys to trigger any kind of routine, like a PostMessage call, for instance. So while working on my workbook, I might want to press, say, ScrollLock followed by a letter of my choice, followed by another letter of my choice (a sort of super shortcut), resulting in the running of a Macro of my choice in Excel.
View 5 Replies
View Related
May 22, 2013
I have a macro running in a workbook that gathers some data (a date, a string and a few arrays). Towards the end of this macro, I need it to open another workbook and run a macro that sits in this other workbook, using the data from the first workbook. I then need it to return some results (several integers) back to the first macro to be pasted into the first workbook.
I gather that I can't use 'Call' as the second macro is in another workbook.
I've found that I can use Application.Run but I'm unsure how to carry variables back and forth using this.
How to move the variables between macros / workbooks using the Application.Run option, or maybe another way of doing things?
View 1 Replies
View Related
Jun 9, 2014
the macro works fine until it executes the paste values. At that point, the macro jumps to the "CountThem" function which is located in another workbook. The data that I am copy/pasting is in no way connected to any cells that are using that function. Although, other values in the workbook are passed down from data that uses that function.
I am still in the dark ages using Excel 2000.
This is the code for my macro.
Code:
Sub Current_to_Raw()
'
' Current_to_Raw Macro
' Macro recorded 2/12/2014 by
'
'
Range("N14").Select
[code]....
View 2 Replies
View Related
Aug 13, 2009
I created two macros. One for refreshing the data I pull from a database, and another one adding some formulas I need. On the formulas macro, I don't know how to have it automatically fill until the last row of data to the left of the column with the formula. (Just like if I double clicked it and it filled down automatically). I also tried to combine these two macros, but I get errors and they don't execute.
View 3 Replies
View Related
Dec 25, 2009
I am trying to create a spreadsheet that will take all my grades from the semester (I'm a college student) and compute my GPA. I managed to get a weighted average for each class, but the grade is on a scale of 1-100. I need to convert that to a letter grade, and then a 4.0 scale. How can I set it up so that it will return "A" if 90<Grade<100, "B" if 80<Grade<90, etc.? I'm apologize if this is something simple, but I've been trying to find the right function for a long time.
View 5 Replies
View Related
Feb 19, 2014
I work for a construction company, Someone else created a workbook a few years ago with 140 similar pages, each listing a separate piece of equipment as a service record. I need to print these out randomly for mechanics to update with new information, as they service the machines. However, some of the pages of the original workbook are goofy and the workbook as a whole could be improved. But, oh that many pages!
I have worked on a new template page for entering information to make the worksheets all cohesive and updated. Is there an EASY and/or FAST way for me to copy this page 150x to make a new workbook, and just enter my data onto each new page? I really don't want to reformat each page of the original workbook individually to see if I can fix all the glitches and weirdnesses that have occurred on the pages over the years. I thought it would be much easier to retype the data onto new pages.
View 6 Replies
View Related
Nov 19, 2009
I am having a little difficulty getting my vba to correspond to what i want it to do. I have columns that can vary with how many rows they have weekly. The all start at P2, R2, V2.
These columns always have the same number of rows as each other, but the number of rows varies.
I compare my R2>P2, and if it is return the number in R2. If not, i am looking to take P2 and round down to the nearest .95. (ex: R2 is at 3.45. The value that should be put in in V2 is 2.95. Since the values all change as well, it needs to compare: .96-1.95, 1.96-2.95, etc. all the way up to 15,000.
I know it can be done with if's, whiles, or from i to x, but my experience is in vb.net, not vba. And, since i am new at this, i can write the code, but don't know how to make it correspond to a new excel filename weekly.
View 13 Replies
View Related
Oct 4, 2013
My workbook is a variation of the below repeated on a number of sheets.
Sheet 1
A
B
C
1
Name
Carrots
Peas
2
John Smith
0
7
3
John Doe
2
1
4
Joe Bloggs
4
0
On a separate summary sheet Im struggling to create a formula that would look through all sheets and Sum where 'John Smith' appears and then sum the number of 'Carrots' (if any) and 'Peas' and then the same for any other names that has values attached to it. The names in each sheet may not be in the same order or appear at all otherwise I would just use a standard sum on each sheet.
View 2 Replies
View Related
May 6, 2014
I have 153 rows of data to name, with a different offset formula per row.
View 8 Replies
View Related
Aug 8, 2008
Let's see who's got the logic.
What I have:
Column C containing either 1 or 0.5 or ""
Column E starting at E9 which may contain "deal" or a few other things
Column I starting at I9 which may contain "here", "away", or "no"
Cell J4 which will contain a number........
View 9 Replies
View Related
Jun 19, 2007
I am currently trying to organize numerous numbers by fractions, and it just will not set up right.
1 1/2
1/2
3/4
2
1
2 X 3/4
1 X 1/2
1 1/2 X 3/4
What would be the best code used, or method, to ensure that these numbers organize correctly?
View 2 Replies
View Related
Dec 7, 2007
I have a VERY complex custom data validation formula that is getting crazy. I thought it might be easier to use a user defined VBA function to handle it, but was unsuccessful.
I was able to write a VBA User Defined Function & use it within my spreadsheet to derive the value of another cell, as follows: =IF(OR(ISBLANK(B12),myValidation(B12)),"OK","NG")
I tried using it as a Custom Data Validation on the cell itself (=myValidation(B12)), and I get an error: "a named range you specified cannot be found".
Can the function be used in this way or could someone suggest another way of handling this?
View 6 Replies
View Related
Jul 16, 2007
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies
View Related
Nov 2, 2011
Is it possible to perform conditional formatting on numerous worksheets at one time. I have about 50 worksheets that I would like to perform the same conditional format on. Is there a way to do this.
View 5 Replies
View Related
Apr 3, 2008
I believe in the past that I have told Excel to send the output of the pivot table to different worksheets. For example if I have three regions- the pivot table would send the output to three worksheets and name the worksheets with the three regions.
View 5 Replies
View Related
